How to Service and Repair Blower Control Switches on Mercury Sable?

The blower motor switch service requires practitioners to start by detaching the RH scuff panel trim before handling the RH cowl side trim panel. Remove both RH lower instrument panel insulator pin-type retainers together with the RH lower instrument panel insulator. Use a screwdriver to break the electrical connection from the blower motor speed control unit before detaching the two screws holding it in place. Remove the speed control component from its position after disconnecting the electrical connector. You should follow the reverse sequence of steps performed during removal to finish the installation.

OEM Mercury Sable Blower Control Switches

HVAC Control Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Blower Control Switches found

View related parts
Mercury Sable Fan Switch Part Number: F49Z-19986-A
$24.41 MSRP: $38.76
You Save: $14.35 (38%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Switch Assembly; HVAC Blower Control and Motor Switch; A/C Heater Motor Switch; Climate Control Module; Blower Resistor; Blower Motor Switch; Blower Control Switch
- Replaces: E6DZ-19986-A, YH-445
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1986-1991 Mercury Sable | GS, LS | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Mercury Sable Temperature Control Part Number: F4DZ-19986-A
$28.38 MSRP: $45.07
You Save: $16.69 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly; HVAC Blower Control Switch; Climate Control Module; Blower Motor Resistor; Fan Switch; Blower Motor Switch; Blower Control Switch
- Replaces: F2DZ-19986-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-1999 Mercury Sable | G, GS, LS, LS Premium, LTS | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Mercury Sable Blower Motor Switch Part Number: 7C3Z-19986-A
$20.66 MSRP: $32.80
You Save: $12.14 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly; Climate Control Module; Blower Control Switch; Blower Motor Resistor
- Manufacturer Note: Switch - blower motor
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Mercury Sable | Base, Premier | 6 Cyl 3.5 L GAS
View related parts
Mercury Sable Blower Motor Switch Part Number: E6DZ19986B
$36.70 MSRP: $49.94
You Save: $13.24 (27%)
ADD TO CART
Product Specifications
- Other Name: Switch Assembly - A/C Blower; Climate Control Module; Blower Control Switch; Blower Motor Resistor
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1986-1995 Mercury Sable | GS, LS, LTS | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Mercury Sable Blower Motor Switch Part Number: 1F1Z-19986-BA
$7.67 MSRP: $10.44
You Save: $2.77 (27%)
ADD TO CART
Product Specifications
- Other Name: Switch Assembly; Climate Control Module; Blower Control Switch; Blower Motor Resistor
- Manufacturer Note: w/integral A/C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2005 Mercury Sable | GS, LS, LS Premium, Platinum Edition | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Sable Blower Motor Switch Part Number: YF1Z-19986-AB
Product Specifications
- Other Name: Switch Assembly; Climate Control Module; Blower Control Switch; Blower Motor Resistor
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000 Mercury Sable | GS, LS, LS Premium | 6 Cyl 3.0 L GAS
View related parts
Mercury Sable A/C Control Assembly Part Number: E6DZ19980A
Product Specifications
- Other Name: Control Assembly - Manual; Climate Control Module; Dash Control Unit
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1986-1989 Mercury Sable | GS, LS | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Mercury Sable Heater Control Part Number: 8G1Z-19980-F
Product Specifications
- Other Name: Control; HVAC Temperature Control Panel; Climate Control Module; Blower Control Switch; Dash Control Unit
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Mercury Sable | Base, Premier | 6 Cyl 3.5 L GAS
View related parts
Mercury Sable Heater Control Part Number: 8G1Z-19980-D
Product Specifications
- Other Name: Control; HVAC Temperature Control Panel; Climate Control Module; Blower Control Switch; Dash Control Unit
- Replaces: 8G1Z-19980-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Mercury Sable | Base, Premier | 6 Cyl 3.5 L GAS
View related parts
Mercury Sable Heater Control Part Number: 8G1Z-19980-E
Product Specifications
- Other Name: Control; HVAC Temperature Control Panel; Climate Control Module; Blower Control Switch; Dash Control Unit
- Replaces: 8G1Z-19980-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Mercury Sable | Base, Premier | 6 Cyl 3.5 L GAS

Mercury Sable Blower Control Switches

OEM Blower Control Switches boasts unmatched quality. Each part goes through full quality checks. They adhere to Mercury's official factory standards. These steps remove flaws and inconsistencies. So you can get Blower Control Switches with long life and a perfect fit. Come to our website and find genuine Mercury Sable parts. We keep a wide inventory of OEM Sable parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Mercury Sable Blower Control Switches are part and parcel of automobiles and they can be defined as embodying reliability and performance. Intended for the control of the fan speeds of the heating and air conditioning systems of several Mercury Sable models, these Blower Control Switches maintain the desired climate inside the car by controlling the amount of air flow and temperature. The importance of the Mercury Sable Blower Control Switches is important because they offer improved passengers comfort coupled with safety, an aspect that make them significant for a good drive. The fact that they are compatible with various Sable generations proves their remarkable fittings because various designs of Blower Control Switches have been used when developing different generations of the Sable car, adjusting to the drivers' requirements. One feature that is unique with Mercury Sable is the Blower Control Switches which perfectly works hand in hand with the Blower Motor to control the internal environment of the vehicle. This feature not only adds another layer to the vehicle's function but also helps to construct the safety feature of the vehicle by making sure that comfort of the driver and passengers will not be affected regardless the climate. The Mercury Sable one of the models manufactured by Ford's dissolved division has been widely appreciated for its great design and performance feature and the Blower Control Switches contributes significantly for it. Due to the durability and efficiency made public by their previous models, the Mercury Sable Blower Control Switches can still today be recommended to anyone in search of powerful and efficient car.

Mercury Sable Blower Control Switches Parts and Q&A

Blower Motor Switch
7C3Z-19986-A
Q: How to Service and Repair Blower Control Switches on Mercury Sable?
A:
The blower motor switch service requires practitioners to start by detaching the RH scuff panel trim before handling the RH cowl side trim panel. Remove both RH lower instrument panel insulator pin-type retainers together with the RH lower instrument panel insulator. Use a screwdriver to break the electrical connection from the blower motor speed control unit before detaching the two screws holding it in place. Remove the speed control component from its position after disconnecting the electrical connector. You should follow the reverse sequence of steps performed during removal to finish the installation.