How to Address Issues with the Brake Backing Plate on a Mercury Sable?

Service and repair of brake backing plate starts by taking off the brake drum. Steelies should be serviced through disconnecting the parking brake cable then taking out the wheel cylinder. Route out the brake backing plate by unclipping both the parking brake cable and conduit from its sides. The bolt securing the ABS sensor needs to be detached before throwing away the bolt. First remove the backing plate retaining bolts before discarding those components. Reverse the steps for removal by putting in new bolts when installing the hardware.

How to Service and Repair the Brake Backing Plate on Mercury Sable?

The service process for backing plate repair begins by taking away the brake drum followed by parking brake cable disconnect. You must unfasten the wheel cylinder after which you should unclip the parking brake cable and conduit through the brake backing plate and direct these components out of the plate. Following bolt removal it is necessary to take out the ABS sensor before discarding both parts. Next disconnect all bolts securing the backing plate before discarding them. When installing reverse all steps from the removal process while adding new bolts to all necessary components.

OEM Mercury Sable Brake Backing Plate

Brake Dust Shield

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Brake Backing Plates found

View related parts
Mercury Sable Backing Plate, Rear Part Number: F4ZZ-2C028-A
$11.10 MSRP: $17.18
You Save: $6.08 (36%)
Product Specifications
- Other Name: Shield - Brake Disc Splash; Brake Dust Shield, Rear; Splash Shield; Brake Dust Shield
- Position: Rear
- Replaces: E8OY-2C028-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1989-1992 Mercury Sable | GS, LS | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Mercury Sable Backing Plate, Rear Part Number: F5OY-2C028-A
Product Specifications
- Other Name: Shield - Brake Disc Splash; Brake Dust Shield, Rear; Splash Shield; Brake Dust Shield
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-2005 Mercury Sable | G, GS, LS, LS Premium | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Sable Backing Plate, Front Driver Side Part Number: 4F1Z-2K005-AA
Product Specifications
- Other Name: Shield - Splash; Brake Dust Shield, Front Left; Splash Shield; Brake Dust Shield
- Manufacturer Note: L.H., Triangle cutout
- Position: Front Driver Side
- Replaces: F5OY-2K005-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-2005 Mercury Sable | G, GS, LS, LS Premium, Platinum Edition | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Sable Backing Plate, Front Passenger Side Part Number: 4F1Z-2K004-AA
Product Specifications
- Other Name: Shield - Splash; Brake Dust Shield, Front Right; Splash Shield; Brake Dust Shield
- Manufacturer Note: R.H., Triangle cutout
- Position: Front Passenger Side
- Replaces: F5OY-2K004-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-2005 Mercury Sable | G, GS, LS, LS Premium, Platinum Edition | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Sable Backing Plate, Driver Side Part Number: F3OY-2K005-A
Product Specifications
- Other Name: Shield - Splash; Brake Dust Shield; Splash Shield
- Manufacturer Note: L.H., Round cutout
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1993-1995 Mercury Sable | GS, LS, LTS | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Mercury Sable Backing Plate, Front Driver Side Part Number: 5F9Z-2K005-AA
Product Specifications
- Other Name: Shield - Splash; Brake Dust Shield, Front Left; Splash Shield; Brake Dust Shield
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Mercury Sable | Base, Premier | 6 Cyl 3.5 L GAS
View related parts
Mercury Sable Backing Plate, Front Passenger Side Part Number: 5F9Z-2K004-AA
Product Specifications
- Other Name: Shield - Splash; Brake Dust Shield, Front Right; Splash Shield; Brake Dust Shield
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Mercury Sable | Base, Premier | 6 Cyl 3.5 L GAS
View related parts
Mercury Sable Backing Plate, Rear Driver Side Part Number: 5F9Z-2C029-BA
Product Specifications
- Other Name: Shield - Brake Disc; Brake Dust Shield, Rear Left; Splash Shield; Shield - Brake Disc Splash; Brake Dust Shield
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Mercury Sable | Base, Premier | 6 Cyl 3.5 L GAS
View related parts
Mercury Sable Backing Plate, Rear Driver Side Part Number: 5F9Z-2C029-AA
Product Specifications
- Other Name: Shield - Brake Disc; Brake Dust Shield, Rear Left; Splash Shield; Shield - Brake Disc Splash; Brake Dust Shield
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Mercury Sable | Base, Premier | 6 Cyl 3.5 L GAS
View related parts
Mercury Sable Backing Plate, Rear Passenger Side Part Number: 5F9Z-2C028-BA
Product Specifications
- Other Name: Shield - Brake Disc; Brake Dust Shield, Rear Right; Splash Shield; Shield - Brake Disc Splash; Brake Dust Shield
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Mercury Sable | Base, Premier | 6 Cyl 3.5 L GAS
View related parts
Mercury Sable Backing Plate, Rear Part Number: F3DZ-2C028-A
Product Specifications
- Other Name: Shield - Brake Disc Splash; Brake Dust Shield, Rear; Splash Shield; Brake Dust Shield
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1993-2005 Mercury Sable | GS, LS, LS Premium, LTS, Platinum Edition | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Mercury Sable Backing Plate, Rear Passenger Side Part Number: 5F9Z-2C028-AA
Product Specifications
- Other Name: Shield - Brake Disc; Brake Dust Shield, Rear Right; Splash Shield; Shield - Brake Disc Splash; Brake Dust Shield
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Mercury Sable | Base, Premier | 6 Cyl 3.5 L GAS

Mercury Sable Brake Backing Plate

OEM Brake Backing Plate boasts unmatched quality. Each part goes through full quality checks. They adhere to Mercury's official factory standards. These steps remove flaws and inconsistencies. So you can get Brake Backing Plate with long life and a perfect fit. Come to our website and find genuine Mercury Sable parts. We keep a wide inventory of OEM Sable parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Brake Backing Plate is one of the components in Mercury Sable that proves that the vehicle is reliable and performs well in the market. This is a Brake Backing Plate specially manufactured for several Mercury Sable models to improve efficiency, safety by shielding the brake system against dust and rust. Another automobile model which will accrue much advantage and mileage from this Brake Backing Plate installation is the Mercury Sable - a car renowned for its robustness and advanced engineering requirements; this part not only affords protection to the brake parts but also adds a dimension of style to the fabrication of the car. Safer than the stock brake back plates, the Mercury Sable Brake Backing Plate is available in the conventional one-piece and the modern two-piece designs for maximum installation simplicity and full durability against possible rust and wear. The feature present only in the two-piece model is that maintenance is carried out without removing the axle shaft, which is unusual for Mercury models. In addition, depending on the model, some Sable models come with backing plates that are designed to serve as dust shields as well, meaning that your brakes are shielded in two ways at once. It is not just an ordinary brake backing plate for Mercury Sable but represents the quality Mercury cars are recognised for, thus provide the expectation to car users of safe and efficient stopping power on the road. In line with its impressive reputation and careful design, the Mercury Sable Brake Backing Plate is one of the most basic requirements for any car owner who wants to make sure their Sable stays as good as new.

Mercury Sable Brake Backing Plate Parts and Q&A

Backing Plate, Front Passenger Side
4F1Z-2K004-AA
Q: How to Address Issues with the Brake Backing Plate on a Mercury Sable?
A:
Service and repair of brake backing plate starts by taking off the brake drum. Steelies should be serviced through disconnecting the Parking Brake Cable then taking out the Wheel Cylinder. Route out the brake backing plate by unclipping both the parking brake cable and conduit from its sides. The bolt securing the ABS Sensor needs to be detached before throwing away the bolt. First remove the backing plate retaining bolts before discarding those components. Reverse the steps for removal by putting in new bolts when installing the hardware.
Backing Plate, Front Driver Side
4F1Z-2K005-AA
Q: How to Service and Repair the Brake Backing Plate on Mercury Sable?
A:
The service process for backing plate repair begins by taking away the brake drum followed by Parking Brake Cable disconnect. You must unfasten the Wheel Cylinder after which you should unclip the parking brake cable and conduit through the brake backing plate and direct these components out of the plate. Following bolt removal it is necessary to take out the ABS Sensor before discarding both parts. Next disconnect all bolts securing the backing plate before discarding them. When installing reverse all steps from the removal process while adding new bolts to all necessary components.