My Garage
Cart
Make sure this part fits

Ford F65Z-14A701-AA
Control Switch, Front

1992-2024 Ford F65Z14A701AA

Customer Questions & Expert Answers (9)
Ford F65Z-14A701-AA Control Switch, Front
Ford F65Z-14A701-AA Control Switch, Front
  • Part Description
    Switch Assembly; Power Seat Switch, Front
  • Base No.
    14A701
  • Position
    Front
  • Replaces
    F3UZ-14A701-A, E6DZ-14A701-A, F7UZ-14A701-AA
  • Manufacturer
    Ford
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2021-2024, 2015-2019 Ford E-350 Super DutyBase10 Cyl 6.8 L CNG, 10 Cyl 6.8 L GAS, 10 Cyl 6.8 L LPG, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L LPG, 8 Cyl 6.2 L FLEX, 8 Cyl 7.3 L GAS
    1997-2003 Ford F-150Base, Harley-Davidson Edition, King Ranch, Lariat, Lightning, XL, XLT6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
    2004 Ford F-150 HeritageSVT Lightning, XL, XLT6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
    1997-1999 Ford F-250Base, Lariat, XL, XLT8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
    1999, 1992-1995 Ford TaurusGL, L, LX, SE, SHO6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 3.4 L GAS
    1992-1997 Ford ThunderbirdBase, LX, Super Coupe6 Cyl 3.8 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS
    1998-1999 Lincoln NavigatorBase8 Cyl 5.4 L GAS
    1992-1997 Mercury CougarLS, XR-76 Cyl 3.8 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS
    1999, 1992-1995 Mercury SableGS, LS, LTS6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you verify if F65Z-14A701-AA is the right one for my car? Posted by FordPartsDeal Specialist
    A:
    Select Your Vehicle model to verify if part number F65Z-14A701-AA fits your car.
    Posted by FordPartsDeal Specialist
    Q:
    How to service the power seat switch on Ford F-150? Posted by Customer
    A:
    Service of the power seat switch requires starting with battery ground cable removal. Start by unwiring the grounding cable of the battery after which remove the screw holding the front seat back recliner handle in position then grip the handle to extract it. The service on the power seat switch starts with the front seat support knob removal and continues with the front track shield detachment that needs screw unfastening and pin retention disconnection alongside electrical connector removal in equipped models. Following the battery cable disconnection you need to remove the seat control switch from the front seat track side shield by unfastening its screws before removing the switch itself. Follow the same reverse order for installing the parts after their removal.
    Posted by FordPartsDeal Specialist
    Q:
    How to service and repair the power seat switch on Ford F-150? Posted by Customer
    A:
    The first task when servicing or repairing the power seat switch involves disconnecting the battery ground cable. The front seat back recliner handle requires you to first remove its screw then pull off the handle. To get access to the front seat lumbar support knob first pull it outward before moving onto the front seat track side shield that requires removal of screws and pins and deconnection of electrical connectors for the model-specific version. To take out the seat control switch from the front seat track side shield remove the screws followed by the switch itself. To reverse install the system follow the backward order of uninstallation steps.
    Posted by FordPartsDeal Specialist
    Q:
    What safety precautions should be taken before servicing the power seat switch for the 2003 Ford F-150? Posted by Customer
    A:
    Always wear safety glasses to minimize the risk of injury from accidental air bag deployment.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Seat Switch
    Q:
    What should be done for installation for the 2001 Ford F-150? Posted by Customer
    A:
    Reverse the removal procedure.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Seat Switch
    Q:
    What is the next step after removing the front seat track side shield for the 2004 Ford F-150 Heritage? Posted by Customer
    A:
    Take out the seat control switch from the front seat track side shield by removing the screws and then the switch itself.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Seat Switch
    Q:
    How do you disconnect the seat regulator control switch for the 2000 Ford F-150? Posted by Customer
    A:
    Disconnect the seat regulator control switch from the front seat track side shield by removing the screws and then disconnecting the switch.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Seat Switch
    Q:
    What should be done after installing the seat control switch for the 2004 Ford F-150 Heritage? Posted by Customer
    A:
    Position the lumbar adjuster control and install the two mounting screws, followed by the seat adjuster control knobs, covers, and the screws for the seat side trim panel.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Seat Switch
    Q:
    What should be done before starting repairs on the power seat switch for the 2002 Ford F-150? Posted by Customer
    A:
    Disconnect the battery ground cable and wait at least one minute to deplete the backup power supply energy, ensuring to disconnect any auxiliary batteries and power supplies if equipped.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Seat Switch
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Ford Control Switch, Front F65Z-14A701-AA Designed for Proper Fit and Performance

The Ford part F65Z-14A701-AA Control Switch, Front as a genuine Ford Seat Switch component delivers both authenticity and reliability. This item carries a warranty from the manufacturer which guarantees 12-month, 12,000-mile of use. The Ford F65Z-14A701-AA Control Switch, Front is used with Ford F-150, Taurus, Thunderbird vehicles and Mercury Cougar, Sable models and Lincoln Navigator models. The original Ford part will bear the manufacturer part number: F65Z-14A701-AA and where it is made at Ford. It has been specifically developed to fit the Front and has the code: 14A701.
This component has dimensions of 10.1 x 8.3 x 6.3 inches and its weight is approximately 1.50 Pounds. The part F65Z14A701AA is available in New condition while meeting the standards of the product rating. The Switch Assembly; Power Seat Switch, Front belongs to the Direct Replacement category to guarantee it is suitable for its specific vehicle applications. This part F65Z-14A701-AA can be known as Seat Switch; Switch; Power Seat Switch, and it replaces F3UZ-14A701-A, E6DZ-14A701-A, F7UZ-14A701-AA. The inventory reference for this item is SKU: F65Z-14A701-AA. The Ford manufacturer issues a factory warranty for this component which ensures dependable operation and peak performance. You can find delivery and returns information on our Shipping Policy and Return Policy pages.
Original equipment manufacturer parts are of the top standards and their performance is outstanding and top notch. This is explained by the fact that they follow the official manufacturing techniques of Ford, use of premium material and meets high standards of quality. Our site is worth visiting, in case you need high-quality and affordable OEM Ford components. We promise the optimal priced Ford parts on a wide range. You can relax that all OEM products you buy from us include a manufacturer warranty and will be covered by our simple and easy-to-use return policy, so you will not worry about buying a part.