How to service the blower motor resistor on 2000 Ford Expedition?

The blower motor resistor service starts by taking out the trim panel cover on the LH quarter area. Take off the A/C blower motor resistor by disconnecting its electrical connector and then removing the bolts securing the unit before you remove it. The installation process requires the opposite steps used in removal to finalize the process.

OEM 2000 Ford Expedition Blower Motor Resistor

Heater Blower Motor Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Blower Motor Resistors found

View related parts
2000 Ford Expedition Blower Motor Resistor, Rear
Part Number: 4L1Z-19A706-AA
$12.50 MSRP: $17.00
You Save: $4.50 (27%)
ADD TO CART
Product Specifications
- Other Name: Resistor Assembly; HVAC Blower Motor Resistor, Front, Rear; Resistor
- Manufacturer Note: Resistor asy - A/C blower motor, Console heater, with three-pin connector
- Position: Rear
- Replaces: F5TZ-19A706-A
- Base No.: 19A706
- Item Weight: 0.20 Pounds
- Item Dimensions: 3.1 x 1.7 x 2.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4L1Z-19A706-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Expedition Submodels:
- Eddie Bauer, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2000 Ford Expedition Blower Motor Resistor, Rear
Part Number: 4L3Z-19A706-AA
$28.50 MSRP: $45.25
You Save: $16.75 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Resistor Assembly; HVAC Blower Motor Resistor, Front, Rear; HVAC Blower Motor Regulator; Resistor
- Position: Rear
- Replaces: F4ZZ-19A706-A
- Base No.: 19A706
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.1 x 1.7 x 2.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4L3Z-19A706-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Expedition Submodels:
- Eddie Bauer, King Ranch, Limited, NBX, XLS, XLT, XLT Sport | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS

2000 Ford Expedition Blower Motor Resistor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Ford Expedition Blower Motor Resistor available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Ford Expedition Blower Motor Resistor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2000 Ford Expedition Blower Motor Resistor Parts Questions & Experts Answers

Q: How to service the blower motor resistor on 2000 Ford Expedition?
A: The blower motor resistor service starts by taking out the trim panel cover on the LH quarter area. Take off the A/C blower motor resistor by disconnecting its electrical connector and then removing the bolts securing the unit before you remove it. The installation process requires the opposite steps used in removal to finalize the process.