My Garage
Cart

OEM 2006 Lincoln LS Water Pump

H2O Pump
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Water Pump found

  • 2006 Lincoln LS Water Pump Diagram - 2W9Z-8501-BB
    View related parts

    2006 Lincoln LS Water Pump Part Number: 2W9Z-8501-BB

    $122.66 MSRP: $201.82
    You Save: $79.16 (40%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Pump Assembly - Water; Engine Water Pump; Water Pump Assembly
    • Manufacturer Note: With Gasket
    • Base No.: 8501
    • Item Weight: 2.70 Pounds
    • Item Dimensions: 6.2 x 6.1 x 8.1 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 2W9Z-8501-BB
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2006 Lincoln LS Submodels:
    • Base, LSE, Sport, Ultimate | 8 Cyl 3.9 L GAS

2006 Lincoln LS Water Pump

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Lincoln LS Water Pump available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Lincoln LS Water Pump as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Lincoln LS Water Pump Parts Q&A

  • Q: How to service the Water Pump on 2006 Lincoln LS?
    A: Service of the coolant pump requires draining the cooling system at first. The next step involves removing the thermostat housing yet keeping the coolant pump pulley bolts untightened. Remove the accessory drive belt next from the components. Following bolt removal secure the coolant pump pulley at 10 Nm (89 inch lbs.) and proceed to turn it another 45 degrees before install. The following service requires complete removal of the five bolts and the coolant pump alongside disposal of the previous gasket. Tighten the new coolant pump to 8 Nm before rotating it 90 degrees. A new coolant pump gasket must be used before performing the removal reverse procedure to install the components. Bleeding and filling the cooling system should be performed to finalize this servicing work.