OEM 2007 Lincoln Navigator Automatic Transmission Shift Levers

2007 Lincoln Navigator Automatic Transmission Shift Levers Parts Questions & Experts Answers

• Q: How to Service and Repair Automatic Transmission Shift Levers Equipped with a 6R75 or 6HP26 Transmission on 2007 Lincoln Navigator?

  A: The first step to handle automatic transmission shift lever repairs on 6R75 transmission vehicles requires removing PRNDL trim together with console tray and cup holder insert prior to taking out the screw and console upper trim. The service repair process begins with cable shift lever disconnection from the shift lever and shift lever arm ball stud and shift lever housing followed by the electrical connector removal from the shift lever. Uninstall the bolts first then remove the shift lever from the console housing. Vehicles equipped with a 6HP26 transmission need you to eliminate the shift lever trim plate and employ a suitable tool to lift the floor console upper panel from the rear. First disconnect the shift lever cable from the ball stud of the shift lever arm before removing the center console LH kick panel and the shift lever cable from the shift lever housing and electrical connector to expose the bolts for lifting the shift lever out of the console. To install to vehicles using a 6R75 transmission you should position the shift lever into the console followed by tightening it to 8 Nm (71 lb-in). Afterwards connect the shift lever electrical connector. Secure the vehicle by pressing the cable bracket until it clicks before validating that the cable has a secure lock. To verify correct installation of the shift lever cable users should both listen for the audible click sound and confirm that the connection takes place properly between the shift lever, the shift lever housing, and the shift lever arm ball stud. To finish the installation sequence you will add the console upper trim with its screw then put on the PRNDL trim and install the console tray followed by the cup holder insert. The shift lever installation requires a 8 Nm (71 lb-in) torque setting for vehicles with 6HP26 transmission along with electrical connector connection before completing shift lever cable procedures like the 6R75 models. The center console LH kick panel installation should be followed by the floor console upper panel and the shift lever trim plate. All vehicle shift lever cables need appropriate adjustment at the end of the installation process.