How to service and repair the brake caliper for the 4.0L SOHC and 4.6L (3V) disc brake system on 2008 Ford Mustang?

Start brake caliper servicing and repairing for the 4.0L SOHC and 4.6L (3V) disc brake system by taking off the wheel along with the tire. The service starts with unfastening the caliper flow bolt while discarding the two copper washers. Service of brake calipers demands the avoidance of using the caliper sight hole for piston retraction because damages can occur; proper service requires guide pin bolt removal from the brake caliper. Check the brake caliper for leaks while inspecting its boots and apply a new brake caliper if there are any observed issues. Place the brake caliper into position while securing it with two new guide pin bolts that should be tightened to 34 Nm (25 lb-ft). Two new copper washers should be used to hook up the brake flexible hose to the brake caliper before installing the brake caliper flow bolt which needs tightening to 40 Nm (30 lb-ft). Before done install the wheel along with the tire while performing a brake system bleed procedure. Follow manufacturer instructions when using brake fluid since unclean or improper fluid types will damage components; clean up brake fluid spills immediately with water as it harms plastics and paints. In case of emergency medical concerns related to Ford/Motorcraft products users can contact 1-800-959-3673 from the USA or Canada while MSDS provided with the product must be referred to.

OEM 2008 Ford Mustang Brake Caliper

Caliper

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Brake Calipers found

View related parts
2008 Ford Mustang Caliper, Rear Driver Side Part Number: DR3Z-2553-C
$468.30 MSRP: $810.91
You Save: $342.61 (43%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly - Brake - Less Pad; Disc Brake Caliper, Rear Left; Brake Caliper Repair Kit; Brake Caliper
- Position: Rear Driver Side
- Replaces: 5R3Z-2553-AA, BRCF-124, BRCF-28, 8R3Z-2553-A, CR3Z-2553-C, BRCF-231
- Base No.: 2553
- Item Weight: 9.30 Pounds
- Item Dimensions: 9.2 x 7.1 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: DR3Z-2553-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Mustang Submodels:
- Base, GT | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS
View related parts
2008 Ford Mustang Caliper, Rear Passenger Side Part Number: DR3Z-2552-C
$473.04 MSRP: $785.45
You Save: $312.41 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly - Brake - Less Pad; Disc Brake Caliper, Rear Right; Brake Caliper Repair Kit; Brake Caliper
- Position: Rear Passenger Side
- Replaces: BRCF-230, 5R3Z-2552-AA, BRCF-123, CR3Z-2552-C
- Base No.: 2552
- Item Weight: 8.90 Pounds
- Item Dimensions: 9.9 x 7.7 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: DR3Z-2552-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Mustang Submodels:
- Base, GT | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS
View related parts
2008 Ford Mustang Caliper, Front Passenger Side Part Number: 7R3Z-2B120-A
$348.45 MSRP: $558.18
You Save: $209.73 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly - Brake - Less Pad; Disc Brake Caliper, Front Right; Brake Caliper Repair Kit; Caliper Assembly - Brake - Less Pads; Brake Caliper
- Position: Front Passenger Side
- Base No.: 2B120
- Item Weight: 9.50 Pounds
- Item Dimensions: 7.6 x 6.4 x 7.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7R3Z-2B120-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Mustang Submodels:
- Bullitt, Shelby GT, Shelby GT500, Shelby GT500KR | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS
View related parts
2008 Ford Mustang Caliper, Front Driver Side Part Number: 6R3Z-2B121-AA
$81.08 MSRP: $134.36
You Save: $53.28 (40%)
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly - Brake - Less Pad; Disc Brake Caliper, Front Left; Brake Caliper Repair Kit; Brake Caliper
- Position: Front Driver Side
- Replaces: 5R3Z-2B121-A, 6R3Z-2B121-A
- Base No.: 2B121
- Item Weight: 8.60 Pounds
- Item Dimensions: 9.9 x 7.5 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6R3Z-2B121-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Mustang Submodels:
- Base, GT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2008 Ford Mustang Caliper, Rear Driver Side Part Number: DR3Z-2553-B
$518.55 MSRP: $836.36
You Save: $317.81 (38%)
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly - Brake - Less Pad; Disc Brake Caliper, Rear Left; Brake Caliper Repair Kit; Brake Caliper
- Position: Rear Driver Side
- Replaces: 7R3Z-2553-A, CR3Z-2553-B, DR3Z-2553-A, BRCF-223
- Base No.: 2552
- Item Weight: 8.80 Pounds
- Item Dimensions: 9.7 x 7.4 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: DR3Z-2553-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Mustang Submodels:
- Boss 302, Bullitt, Shelby GT, Shelby GT500, Shelby GT500KR | 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS
View related parts
2008 Ford Mustang Caliper, Rear Passenger Side Part Number: DR3Z-2552-B
$599.55 MSRP: $967.27
You Save: $367.72 (39%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly - Brake - Less Pad; Disc Brake Caliper, Rear Right; Brake Caliper Repair Kit; Brake Caliper
- Position: Rear Passenger Side
- Replaces: CR3Z-2552-B, 7R3Z-2552-A, BRCF-222, DR3Z-2552-A
- Base No.: 2552
- Item Weight: 8.90 Pounds
- Item Dimensions: 9.8 x 7.5 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: DR3Z-2552-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Mustang Submodels:
- Boss 302, Bullitt, Shelby GT, Shelby GT500, Shelby GT500KR | 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS
View related parts
2008 Ford Mustang Caliper, Front Passenger Side Part Number: 6R3Z-2B120-A
$83.57 MSRP: $138.55
You Save: $54.98 (40%)
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly - Brake - Less Pad; Disc Brake Caliper, Front Right; Brake Caliper Repair Kit; Caliper Assembly - Brake - Less Pads; Brake Caliper
- Position: Front Passenger Side
- Replaces: 5R3Z-2B120-A
- Base No.: 2B120
- Item Weight: 8.80 Pounds
- Item Dimensions: 9.5 x 7.6 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6R3Z-2B120-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Mustang Submodels:
- Base, GT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2008 Ford Mustang Caliper, Front Driver Side Part Number: 7R3Z-2B121-A
$347.31 MSRP: $556.36
You Save: $209.05 (38%)
Product Specifications
- Other Name: Caliper Assembly - Brake - Less Pad; Disc Brake Caliper, Front Left; Brake Caliper Repair Kit; Caliper Assembly - Brake - Less Pads; Brake Caliper
- Position: Front Driver Side
- Base No.: 2B120
- Item Weight: 7.50 Pounds
- Item Dimensions: 7.3 x 6.2 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7R3Z-2B121-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Mustang Submodels:
- Bullitt, Shelby GT, Shelby GT500, Shelby GT500KR | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS
View related parts
2008 Ford Mustang Caliper, Front Driver Side Part Number: 8R3Z-2B121-AA
Product Specifications
- Other Name: Caliper Assembly - Brake - Less Pad; Disc Brake Caliper, Front Left; Brake Caliper Repair Kit; Brake Caliper
- Position: Front Driver Side
- Replaces: 8R3Z-2B121-A
- Base No.: 2B121
- Item Weight: 8.90 Pounds
- Item Dimensions: 8.8 x 5.2 x 7.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8R3Z-2B121-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Mustang Submodels:
- Bullitt, GT | 8 Cyl 4.6 L GAS
View related parts
2008 Ford Mustang Caliper, Front Passenger Side Part Number: 8R3Z-2B120-AA
Product Specifications
- Other Name: Caliper Assembly - Brake - Less Pad; Disc Brake Caliper, Front Right; Brake Caliper Repair Kit; Brake Caliper
- Position: Front Passenger Side
- Replaces: 8R3Z-2B120-A
- Base No.: 2B120
- Item Weight: 8.20 Pounds
- Item Dimensions: 8.7 x 5.2 x 7.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8R3Z-2B120-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Mustang Submodels:
- Bullitt, GT | 8 Cyl 4.6 L GAS
View related parts
2008 Ford Mustang Caliper, Rear Passenger Side Part Number: 8R3Z-2552-A
Product Specifications
- Other Name: Caliper Assembly - Brake - Less Pad; Disc Brake Caliper, Rear Right; Brake Caliper Repair Kit; Caliper Assembly - Brake - Less Pads; Brake Caliper
- Manufacturer Note: Includes Bracket
- Position: Rear Passenger Side
- Base No.: 2552
- Item Weight: 5.60 Pounds
- Item Dimensions: 9.7 x 5.4 x 7.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8R3Z-2552-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Mustang Submodels:
- Bullitt, GT | 8 Cyl 4.6 L GAS

2008 Ford Mustang Brake Caliper

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Mustang Brake Caliper available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Mustang Brake Caliper as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford Mustang Brake Caliper Parts Q&A

Q: How to service and repair the brake caliper for the 4.0L SOHC and 4.6L (3V) disc brake system on 2008 Ford Mustang?
A: Start brake caliper servicing and repairing for the 4.0L SOHC and 4.6L (3V) disc brake system by taking off the wheel along with the tire. The service starts with unfastening the caliper flow bolt while discarding the two copper washers. Service of brake calipers demands the avoidance of using the caliper sight hole for piston retraction because damages can occur; proper service requires guide pin bolt removal from the brake caliper. Check the brake caliper for leaks while inspecting its boots and apply a new brake caliper if there are any observed issues. Place the brake caliper into position while securing it with two new guide pin bolts that should be tightened to 34 Nm (25 lb-ft). Two new copper washers should be used to hook up the brake flexible hose to the brake caliper before installing the brake caliper flow bolt which needs tightening to 40 Nm (30 lb-ft). Before done install the wheel along with the tire while performing a brake system bleed procedure. Follow manufacturer instructions when using brake fluid since unclean or improper fluid types will damage components; clean up brake fluid spills immediately with water as it harms plastics and paints. In case of emergency medical concerns related to Ford/Motorcraft products users can contact 1-800-959-3673 from the USA or Canada while MSDS provided with the product must be referred to.