How to service and repair the ignition coil pack on 2009 Ford Ranger?

Initiating the repair process of an ignition coil pack starts with disconnecting its electrical connector. When removing spark plug wires it is essential to twist their boots while lifting because damaged wires can cause engine performance problems through improper connection to ignition coil terminals. Going in reverse order you should function the locking tabs through twisting motions while raising the spark plug wires to detach them from the ignition coil. Proceed by removing the four bolts that maintain the ignition coil into position. During installation secure the bolts at 6 Nm torque while using 53 lb-in as the reference. Silicone dielectric compound should be applied inside the boots of the spark plug wires and the radio ignition interference capacitor needs to be reinstalled underneath the correct mounting bolt for the ignition coil. The installation process will end with a reverse order of removal steps.

OEM 2009 Ford Ranger Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Ignition Coils found

View related parts
2009 Ford Ranger Ignition Coil
Part Number: 1S7Z-12029-AD
$66.74 MSRP: $109.82
You Save: $43.08 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Coil Assembly - Ignition; Direct Ignition Coil Oe Quality; Distributor Less Coil; Direct Ignition Coil; Coil
- Replaces: 1S7Z-12029-AA
- Base No.: 12029
- Item Weight: 1.80 Pounds
- Item Dimensions: 6.4 x 4.5 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1S7Z-12029-AD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Ranger Submodels:
- Sport, STX, XL, XLT | 4 Cyl 2.3 L GAS
View related parts
2009 Ford Ranger Ignition Coil
Part Number: FOTZ-12029-A
$83.87 MSRP: $138.00
You Save: $54.13 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil Assembly - Ignition; Distributor Less Coil; Coil
- Manufacturer Note: OHV, SOHC
- Base No.: 12029
- Item Weight: 4.40 Pounds
- Item Dimensions: 8.2 x 4.5 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: FOTZ-12029-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Ranger Submodels:
- Custom, Edge, FX4, S, S Plus, Splash, Sport, STX, Tremor, XL, XL Sport, XLT | 6 Cyl 4.0 L GAS

2009 Ford Ranger Ignition Coil

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Ranger Ignition Coil available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Ranger Ignition Coil as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford Ranger Ignition Coil Parts Questions & Experts Answers

Q: How to service and repair the ignition coil pack on 2009 Ford Ranger?
A: Initiating the repair process of an ignition coil pack starts with disconnecting its electrical connector. When removing spark plug wires it is essential to twist their boots while lifting because damaged wires can cause engine performance problems through improper connection to ignition coil terminals. Going in reverse order you should function the locking tabs through twisting motions while raising the spark plug wires to detach them from the ignition coil. Proceed by removing the four bolts that maintain the ignition coil into position. During installation secure the bolts at 6 Nm torque while using 53 lb-in as the reference. Silicone dielectric compound should be applied inside the boots of the spark plug wires and the radio ignition interference capacitor needs to be reinstalled underneath the correct mounting bolt for the ignition coil. The installation process will end with a reverse order of removal steps.