How to service and repair the ignition cable and spark plug wires on 2009 Ford Ranger?

Initially check that you will not pull the ignition cable because this might lead to connector separation within the boot. Correct wiring of ignition cables plays an essential role in achieving proper engine performance. Prior to inspection use a clean damp cloth to wipe the ignition cable sets directly on their position while searching for any visible damage including cuts pinches or cracked boots. You can detach the ignition cable from the ignition coil when you twist it before lifting it upward. The first step should be to detach any cable which the main cable passes through. You must remove the spark plug socket by twisting and pulling the ignition cable upwards to disconnect it from the spark plug. The installation process reflects the removal steps while the technician applies silicone dielectric compound at defined areas.

OEM 2009 Ford Ranger Spark Plug Wire

Spark Plug Ignition Wires

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Spark Plug Wires found

View related parts
2009 Ford Ranger Cable Set
Part Number: 5U2Z-12259-C
$46.49 MSRP: $73.82
You Save: $27.33 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Kit; Spark Plug Wire Set; Spark Plug Wire; Plug Wire Set; Ignition Set
- Base No.: 12259
- Item Weight: 3.10 Pounds
- Item Dimensions: 8.2 x 3.2 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5U2Z-12259-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Ranger Submodels:
- Edge, FX4, Sport, STX, Tremor, XL, XLT | 6 Cyl 4.0 L GAS
View related parts
2009 Ford Ranger Cable Set
Part Number: 1L5Z-12259-AA
$31.26 MSRP: $49.64
You Save: $18.38 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Wire Assembly - Ignition; Spark Plug Wire Set; Ignition Set; Spark Plug Wire
- Manufacturer Note: Parts List No. 47
- Base No.: 12259
- Item Weight: 1.20 Pounds
- Item Dimensions: 8.4 x 2.6 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1L5Z-12259-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Ranger Submodels:
- Sport, STX, XL, XLT | 4 Cyl 2.3 L GAS

2009 Ford Ranger Spark Plug Wire

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Ranger Spark Plug Wire available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Ranger Spark Plug Wire as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford Ranger Spark Plug Wire Parts Questions & Experts Answers

Q: How to service and repair the ignition cable and spark plug wires on 2009 Ford Ranger?
A: Initially check that you will not pull the ignition cable because this might lead to connector separation within the boot. Correct wiring of ignition cables plays an essential role in achieving proper engine performance. Prior to inspection use a clean damp cloth to wipe the ignition cable sets directly on their position while searching for any visible damage including cuts pinches or cracked boots. You can detach the ignition cable from the ignition coil when you twist it before lifting it upward. The first step should be to detach any cable which the main cable passes through. You must remove the spark plug socket by twisting and pulling the ignition cable upwards to disconnect it from the spark plug. The installation process reflects the removal steps while the technician applies silicone dielectric compound at defined areas.