Should the retractor and hold-down springs be replaced whenever the brake shoe set are replaced on 1993-2011 Ford Ranger?

Whenever the Brake Shoe Set are replaced, the retractor and hold-down springs should also be replaced due to the continuous heating and cooling cycle that the springs are subjected to, which causes them to lose tension over time and may allow the shoes to drag on the drum, leading to accelerated wear. Begin by loosening the wheel lug nuts, raising the rear of the vehicle, and securely supporting it on jackstands while blocking the front wheels to prevent rolling. Release the parking brake and remove the wheel, ensuring that all four rear Brake Shoe Set are replaced simultaneously, but work on one brake assembly at a time to avoid mixing parts. Inspect and replace the Brake Shoe Set, and if the brake drum cannot be easily removed, pry the rubber plug from the backing plate inspection hole, insert a screwdriver and a brake adjusting tool to lift the adjusting lever and rotate the adjusting screw, which will pull the Brake Shoe Set together. If the mechanism is difficult to turn, spray the assembly with penetrating oil and allow it to soak in. Before reinstalling the drum, check it for cracks, score marks, deep scratches, and hard spots, which appear as small discolored areas; if hard spots cannot be removed with fine emery cloth or if any other issues exist, the drum must be taken to an automotive machine shop for resurfacing. It is recommended to resurface the drums whenever a brake job is performed to eliminate the possibility of out-of-round drums. If the drums are excessively worn and cannot be resurfaced without exceeding the maximum allowable diameter, new drums will be required. If you choose not to resurface, at least remove the glazing from the surface with medium-grit emery cloth using a swirling motion. Install the brake drum on the hub, turn the adjuster wheel until the Brake Shoe Set just drag on the drum when rotated, then back off the adjuster wheel until the shoes no longer drag. Finally, mount the wheel, install the lug nuts, lower the vehicle, and make several forward and reverse stops to adjust the brakes until satisfactory pedal action is achieved.

OEM Ford Brake Shoe Set

Brake Shoe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

58 Brake Shoe Sets found

View related parts
Ford Parking Brake Shoes, Rear Part Number: DC3Z-2648-A
$55.36 MSRP: $91.09
You Save: $35.73 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Kit - Parking Brake Linings; Parking Brake Shoe, Rear; Shoes; Parking Brake Shoe
- Manufacturer Note: One Kit Will Service Both Sides
- Position: Rear
Fits the following Ford Models:
- F-250 Super Duty | 2013-2022 | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 7.3 L GAS
- F-350 Super Duty | 2013-2022 | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 7.3 L GAS
View related parts
Ford Parking Brake Shoes, Rear Part Number: 8C3Z-2648-A
$48.72 MSRP: $81.64
You Save: $32.92 (41%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Kit - Brake Shoe And Lining; Parking Brake Shoe, Rear; Shoes; Parking Brake Shoe
- Position: Rear
- Replaces: 5C3Z-2648-AA
Fits the following Ford Models:
- E-150 | 2007 | Base, Base Level 2, Chateau, RV Prep, XL, XLT | 4.6L V8, 5.4L V8, 6.0L V8, 6.8L V10
- E-250 | 2005-2007 | Base, Base Level 2, Chateau, RV Prep, XL, XLT | 4.6L V8, 5.4L V8, 6.0L V8, 6.8L V10
- E-350/E-350 Super Duty | 2005-2007 | Base, Base Level 2, Chateau, RV Prep, XL, XLT | 4.6L V8, 5.4L V8, 6.0L V8, 6.8L V10
- F-250 Super Duty | 2005-2012 | Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 5.4L V8, 6.0L V8, 6.4L V8, 6.8L V10, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 6.2 L FLEX, 8 Cyl 6.4 L DIESEL, 8 Cyl 6.7 L DIESEL
- F-350 Super Duty | 2005-2012 | Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 5.4L V8, 6.0L V8, 6.4L V8, 6.8L V10, 8 Cyl 5.4 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.4 L DIESEL, 8 Cyl 6.7 L DIESEL
View More
View related parts
Ford Parking Brake, Rear Part Number: 6L2Z-2648-A
$60.32 MSRP: $101.27
You Save: $40.95 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Kit - Brake Shoe And Lining; Parking Brake Shoe, Rear; Parking Brake Shoes; Shoes; Parking Brake Shoe
- Position: Rear
- Replaces: 5L2Z-2648-A
Fits the following Ford Models:
- Explorer | 2002-2010 | Base, Eddie Bauer, Elite, Limited, Mercury Luxury, Mercury Premier, Mountaineer Version, NBX, XLS, XLS Sport, XLT, XLT Sport | 4.0L V6, 4.6L V8, 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Ford Parking Brake Shoes, Rear Part Number: 8C3Z-2648-B
$72.02 MSRP: $120.91
You Save: $48.89 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Kit - Brake Shoe And Lining; Parking Brake Shoe, Rear; Shoes; Parking Brake Shoe
- Position: Rear
- Replaces: 5C3Z-2648-BA
Fits the following Ford Models:
- F-350 Super Duty | 2005-2007 | Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL
- F-450 Super Duty | 2005-2008 | FX4, Lariat, XL, XLT | 5.4L V8, 6.0L V8, 6.4L V8, 6.8L V10
- F-550 Super Duty | 2005-2008 | FX4, Lariat, XL, XLT | 5.4L V8, 6.0L V8, 6.4L V8, 6.8L V10
View More
View related parts
Ford Parking Brake Shoes, Rear Part Number: BC3Z-2648-A
$46.97 MSRP: $76.73
You Save: $29.76 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Kit - Parking Brake Linings; Parking Brake Shoe, Rear; Shoes; Parking Brake Shoe
- Position: Rear
Fits the following Ford Models:
- F-250 Super Duty | 2011-2012 | King Ranch, Lariat, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL
- F-350 Super Duty | 2011-2012 | King Ranch, Lariat, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL
View related parts
Ford Parking Brake Shoes, Rear Part Number: AT4Z-2A753-A
$45.46 MSRP: $72.18
You Save: $26.72 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Kit - Parking Brake Linings; Parking Brake Shoe, Rear; Shoes; Parking Brake Shoe
- Position: Rear
- Replaces: 7T4Z-2A753-A
Fits the following Ford Models:
- Edge | 2007-2010 | Base, Limited, Lincoln, Premium, SE, SEL, SEL Plus, SEL Plus (Limited), Sport, ST | 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
Ford Parking Brake Shoes, Rear Part Number: CL3Z-2648-B
$45.80 MSRP: $72.73
You Save: $26.93 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Kit - Parking Brake Linings; Parking Brake Shoe, Rear; Shoes; Parking Brake Shoe
- Manufacturer Note: Kit (RH And LH Sides)
- Position: Rear
- Replaces: CL3Z-2648-A
Fits the following Ford Models:
- F-150 | 2012-2020 | FX2, FX4, FX4 Off Road, Harley-Davidson Edition, King Ranch, Lariat, Limited, Lincoln, Platinum, Police Responder, Raptor, SSV, STX, SVT Raptor, XL, XLT | 3.5L V6, 3.7L V6, 4.6L V8, 5.0L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.3 L FLEX, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L CNG, 6 Cyl 3.7 L FLEX, 6 Cyl 3.7 L LPG, 6.2L V8, 8 Cyl 5.0 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Ford Brake Shoes, Rear Part Number: 8V5Z-2200-A
$65.09 MSRP: $99.98
You Save: $34.89 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Kit - Brake Lining; Drum Brake Shoe, Rear; Parking Brake Shoe; Shoes; Drum Brake Shoe
- Manufacturer Note: Warranty Eligible
- Position: Rear
- Replaces: BRF-12, BE8Z-2200-B, BRF-1580, E4BZ-2200-B
Fits the following Ford Models:
- Fiesta | 2011-2019 | High Version - Car, High Version Level 2, I 4-Door Version, Low Version - Car, Mid Version - Car, S, SE, SEL, SES, ST, ST Line, Titanium | 1.0L L3, 1.6L L4, 3 Cyl 1.0 L GAS, 4 Cyl 1.6 L GAS
View related parts
Ford Brake Shoes, Rear Part Number: BV6Z-2200-A
$66.29 MSRP: $99.98
You Save: $33.69 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Kit - Brake Lining; Drum Brake Shoe, Rear; Parking Brake Shoe; Rear Shoes; Drum Brake Shoe
- Position: Rear
Fits the following Ford Models:
- Focus | 2012-2018 | RS, S, SE, SEL, ST, Titanium | 3 Cyl 1.0 L GAS, 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Ford Brake Pads, Front Part Number: DR3Z-2001-D
$156.91 MSRP: $236.67
You Save: $79.76 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Kit - Brake Lining; Disc Brake Pad Set, Front; Front Pads
- Position: Front
- Replaces: DR3Z-2001-B, DR3Z-2001-BB
Fits the following Ford Models:
- Mustang | 2013-2014 | Shelby GT500, Shelby Version | 3.7L V6, 4.6L V8, 5.0L V8, 5.4L V8, 5.8L V8, 8 Cyl 5.8 L GAS
View related parts
Ford Brake Pads, Front Part Number: DG1Z-2001-F
$164.65 MSRP: $248.33
You Save: $83.68 (34%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Kit - Brake Lining; Disc Brake Pad Set, Front; Disc Brake Pad Kit; Disc Brake Pad Set; Front Pads
- Position: Front
- Replaces: BRF-1435, BRF-17, DG1Z-2001-B, DG1Z-2001-E
Fits the following Ford Models:
- Explorer | 2013-2019 | Base, DX, Limited, Platinum, Police, Sport, XLT | 2.0L L4, 2.3L L4, 3.5L V6, 3.7L V6, 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 6 Cyl 3.5 L GAS
- Police Interceptor Sedan | 2013-2019 | Base | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L FLEX, 6 Cyl 3.7 L GAS
- Police Interceptor Utility | 2013-2019 | Base | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L FLEX, 6 Cyl 3.7 L GAS
- Special Service Police Sedan | 2014-2018 | Base | 4 Cyl 2.0 L GAS
- Taurus | 2013-2019 | Police, SHO | 2.0L L4, 3.5L V6, 3.7L V6, 6 Cyl 3.5 L GAS
View More
View related parts
Ford Parking Brake, Rear Part Number: 5L8Z-2A753-AA
$62.66 MSRP: $85.27
You Save: $22.61 (27%)
ADD TO CART
Product Specifications
- Other Name: Shoe And Lining Assembly; Parking Brake Shoe, Rear
- Position: Rear
Fits the following Ford Models:
- Escape | 2005-2010 | Hybrid, Limited, Limited Hybrid, XLS, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Ford Parking Brake Shoes, Rear Part Number: 7L1Z-2A753-A
$150.12 MSRP: $252.73
You Save: $102.61 (41%)
ADD TO CART
Product Specifications
- Other Name: Kit - Brake Shoe And Lining; Parking Brake Shoe, Rear; Shoes; Parking Brake Shoe
- Manufacturer Note: RH/LH
- Position: Rear
Fits the following Ford Models:
- Expedition | 2007-2017 | EL Eddie Bauer, EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT, Eddie Bauer, Funkmaster Flex Edition, King Ranch, Limited, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
Ford Parking Brake Shoes, Rear Part Number: 8C2Z-2648-A
$69.06 MSRP: $113.64
You Save: $44.58 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Kit - Brake Shoe And Lining; Parking Brake Shoe, Rear; Shoes; Parking Brake Shoe
- Position: Rear
Fits the following Ford Models:
- E-150 | 2008-2014 | Base, XL, XLT | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
- E-250 | 2008-2014 | Base | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
- E-350 Super Duty | 2021-2025, 2008-2019 | Base, XL, XLT | 10 Cyl 6.8 L CNG, 10 Cyl 6.8 L GAS, 10 Cyl 6.8 L LPG, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG, 8 Cyl 6.0 L DIESEL, 8 Cyl 6.2 L FLEX, 8 Cyl 7.3 L GAS
View More
View related parts
Ford Parking Brake Shoes Part Number: PC3Z-2648-A
$111.95 MSRP: $184.20
You Save: $72.25 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Kit - Parking Brake Linings; Shoes
Fits the following Ford Models:
- F-250 Super Duty | 2023-2025 | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L FLEX, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
- F-350 Super Duty | 2023-2025 | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
View related parts
Ford Brake Shoes, Rear Part Number: 2T1Z-2200-C
Product Specifications
- Other Name: Kit - Brake Lining; Drum Brake Shoe, Rear; Parking Brake Shoe; Rear Shoes; Drum Brake Shoe
- Manufacturer Note: Comes With Brake Cable Lever
- Position: Rear
Fits the following Ford Models:
- Transit Connect | 2010-2013 | XL, XLT, XLT Premium | 4 Cyl 2.0 L GAS
View related parts
Ford Parking Brake, Rear Part Number: BU2Z-2648-B
Product Specifications
- Other Name: Kit - Parking Brake Linings; Parking Brake Shoe, Rear; Parking Brake Shoes; Shoes; Parking Brake Shoe
- Manufacturer Note: Ford Retail Spec
- Position: Rear
- Replaces: 5L3Z-2648-A, 7L3Z-2648-A
Fits the following Ford Models:
- Expedition | 1997-2002 | Eddie Bauer, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
- F-150 | 1997-2008 | Base, FX2, FX4, FX4 Off Road, Harley-Davidson Edition, King Ranch, Lariat, Lightning, Limited, Lincoln, STX, THE 60TH ANNIVERSARY EDITION, XL, XLT | 4.2L V6, 4.6L V8, 5.4L V8, 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
- F-150 Heritage | 2004 | SVT Lightning, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
- F-250 | 1997-1999 | Base, Lariat, XL, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View More
View related parts
Ford Shoes, Rear Part Number: 9U2Z-2A753-A
Product Specifications
- Other Name: Kit - Parking Brake Linings; Parking Brake Shoe, Rear; Parking Brake Shoe
- Position: Rear
- Replaces: F81Z-2648-CA
Fits the following Ford Models:
- F-250 | 1999 | Base, Lariat, XL, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
- F-250 Super Duty | 1999-2004 | Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
- F-350 Super Duty | 1999-2004 | Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
View More
View related parts
Ford Brake Shoes, Rear Part Number: 6W1Z-2N712-A
Product Specifications
- Other Name: Kit - Brake Shoe And Lining; Parking Brake Shoe, Rear; Parking Brake Shoes; Shoes; Parking Brake Shoe
- Position: Rear
- Replaces: 5W1Z-2N712-A
Fits the following Ford Models:
- Crown Victoria | 2003-2011 | Base, LWB, LX, LX Sport, Police Interceptor, S, Special Edition | 4.6L V8, 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
- Ranger | 2010-2011 | Sport, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 4.0 L GAS
View related parts
Ford Brake Shoes, Rear Part Number: 1L5Z-2200-AA
Product Specifications
- Other Name: Kit - Brake Shoe And Hardware; Drum Brake Shoe, Rear; Parking Brake Shoe
- Manufacturer Note: Warranty Eligible
- Position: Rear
Fits the following Ford Models:
- Explorer Sport Trac | 2001-2002 | Base, XL | 6 Cyl 4.0 L GAS

| Page 1 of 3 |Next >

1-20 of 58 Results

Ford Brake Shoe Set

If you own Ford and want to keep it in top shape, choosing OEM Brake Shoe Set is a smart move. They are precisely engineered and follow strict factory standards. They are made in advanced facilities that use cutting edge technology. Each part goes through thorough testing to confirm strength and safety, so you can trust it. FordPartsDeal.com gives you genuine Ford Brake Shoe Set at some of the affordable online prices without cutting quality. Every OEM Ford part includes the manufacturer's warranty, easy returns, and super-fast delivery. So why wait? Shop now and get your vehicle back to peak condition.

Ford Brake Shoe Set clamp down on the drum hard to make pedal pressure a quick steady stop. In 1903 then in 1913 its moving assembly line reduced build times, and affordable durable cars to the reach of ordinary customers all over the world began with Ford. Ford pushes the savings on fuel consumption with aggressive EcoBoost engines that combine small engine capacity with turbo charge to accelerate fast on the road and consume leanly. Ford also installs cabins with the SYNC voice control that enables drivers to play music or maps by just talking, their eyes on the road and hands at the wheel. Ford supports the faith with Co-Pilot360 automatic braking and lane notifications even as it jumps to zero-emissions power with the electric F-150 Lightning. Within a drum system, the Brake Shoe Set presses rugged friction slamming into one another with hydraulic exertion converts wheel energy into heat as well as slices speed with consistent regulation. Every Brake Shoe Set has a partner in a self-energizing design that pulls the second harder and increases the torque without requiring added pedal effort. Frequent inspections will ensure that a Brake Shoe Set is clear of dust and is not below the wear limit to provide a sharp engagement each time the driver stops. Durable compounds allow a Brake Shoe Set to serve long miles and provide the drum brakes with reliable bite over the years.

Ford Brake Shoe Set Parts and Q&A

Brake Shoes, Rear
LU2Z-2V200-F
Q: Should the retractor and hold-down springs be replaced whenever the brake shoe set are replaced on 1993-2011 Ford Ranger?
A:
Whenever the Brake Shoe Set are replaced, the retractor and hold-down springs should also be replaced due to the continuous heating and cooling cycle that the springs are subjected to, which causes them to lose tension over time and may allow the shoes to drag on the drum, leading to accelerated wear. Begin by loosening the wheel lug nuts, raising the rear of the vehicle, and securely supporting it on jackstands while blocking the front wheels to prevent rolling. Release the parking brake and remove the wheel, ensuring that all four rear Brake Shoe Set are replaced simultaneously, but work on one brake assembly at a time to avoid mixing parts. Inspect and replace the Brake Shoe Set, and if the brake drum cannot be easily removed, pry the rubber plug from the backing plate inspection hole, insert a screwdriver and a brake adjusting tool to lift the adjusting lever and rotate the adjusting screw, which will pull the Brake Shoe Set together. If the mechanism is difficult to turn, spray the assembly with penetrating oil and allow it to soak in. Before reinstalling the drum, check it for cracks, score marks, deep scratches, and hard spots, which appear as small discolored areas; if hard spots cannot be removed with fine emery cloth or if any other issues exist, the drum must be taken to an automotive machine shop for resurfacing. It is recommended to resurface the drums whenever a brake job is performed to eliminate the possibility of out-of-round drums. If the drums are excessively worn and cannot be resurfaced without exceeding the maximum allowable diameter, new drums will be required. If you choose not to resurface, at least remove the glazing from the surface with medium-grit emery cloth using a swirling motion. Install the brake drum on the hub, turn the adjuster wheel until the Brake Shoe Set just drag on the drum when rotated, then back off the adjuster wheel until the shoes no longer drag. Finally, mount the wheel, install the lug nuts, lower the vehicle, and make several forward and reverse stops to adjust the brakes until satisfactory pedal action is achieved.