What Precautions Should Be Taken When Servicing the Front Air Bag Sensor on Ford E-150?

For front impact severity sensor servicing the driver should use safety glasses to protect themselves from accidental air bag deployment incidents. Vehicle sensor orientation must be checked to maintain proper system functioning while inspections of sensor mounting brackets and supplemental restraint wiring pigtail happen for deformation and all damaged components need proper replacement before sensor installation even if air bags did not trigger. Memory saver devices should never be utilized because they create safety hazards for humans. The air bag warning lamp turns on during this condition because of the removed RCM fuse when the ignition switch is ON. This normal state does not indicate any problems with the supplemental restraint system. Check that the SRS functions properly along with its faultless operation before handing over the vehicle to customers. The repair work should start with new part installation followed by original part reinstallation when the issue remains to perform diagnostic check again. Begin with depowering the system before unfastening the top radiator grille screws while pulling it forwards to unlock lower mounting clips. The front air foil needs to be lowered and the electrical connector must be detached from the front impact severity sensor before sensor boltted access becomes possible. The correct system operation depends on tightening every retaining bolt of the front impact severity sensor to 12 Nm (9 lb-ft) while maintaining clean and debris-free surfaces between the sensor and radiator support. Recharge the system following the reverse order of uninstallation then replace the sensor along with its two bolts.

OEM Ford E-150 Air Bag Sensor

Air Bag Impact Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Air Bag Sensors found

View related parts
Ford E-150 Diagnostic Module Part Number: 6C2Z-14B321-AA
$314.01 MSRP: $434.40
You Save: $120.39 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly - Airbag; Sensor Assembly - Air Bag
- Replaces: 4C2Z-14B321-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2007 Ford E-150 | Base, Chateau, XL, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford E-150 Diagnostic Module Part Number: 6C2Z-14B321-BA
$387.59 MSRP: $569.15
You Save: $181.56 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly - Airbag; Sensor Assembly - Air Bag
- Replaces: 4C2Z-14B321-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2007 Ford E-150 | Base, Chateau, XL, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford E-150 Front Sensor Part Number: 9C2Z-14B004-A
$52.78 MSRP: $83.82
You Save: $31.04 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; Air Bag Impact Sensor, Front; Air Bag Sensor
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2014 Ford E-150 | Base, XL, XLT | 8 Cyl 4.6 L FLEX, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L LPG
View related parts
Ford E-150 Front Sensor Part Number: 8C2Z-14B004-A
Product Specifications
- Other Name: Sensor Assembly; Air Bag Impact Sensor; Air Bag Sensor
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008 Ford E-150 | Base, XL, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford E-150 Air Bag Sensor Part Number: 6C2Z-14B004-AA
Product Specifications
- Other Name: Sensor Assembly; Air Bag Impact Sensor; Front Sensor
- Replaces: 4C2Z-14B004-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2007 Ford E-150 | Base, Chateau, XL, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford E-150 Air Bag Sensor Part Number: F7UZ-14B004-DA
Product Specifications
- Other Name: Sensor Assembly; Air Bag Impact Sensor; Front Sensor
- Manufacturer Note: Located on the upper rad. support
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003 Ford E-150 | Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford E-150 Control Module Part Number: F7UZ-14B056-CA
Product Specifications
- Other Name: Sensor Assembly; Diagnostic Module
- Manufacturer Note: Sensor and module, passenger side kick panel, w/driver and passenger airbag, w/pretensioners for both front seatbelts
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003 Ford E-150 | Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford E-150 Control Module Part Number: F7UZ-14B056-BA
Product Specifications
- Other Name: Sensor Assembly
- Manufacturer Note: Sensor and module, passenger side kick panel, w/driver airbag only, w/pretensioners for both front seat belts
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003 Ford E-150 | Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS

Ford E-150 Air Bag Sensor

OEM Air Bag Sensor boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Air Bag Sensor with long life and a perfect fit. Come to our website and find genuine Ford E-150 parts. We keep a wide inventory of OEM E-150 parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Ford E-150 Air Bag Sensor or more specifically the crash sensor is one of the most critical modules of the Ford E-150 safety systems aimed at providing optimal performance and increased occupant safety. Despite its small size, this vital Air Bag Sensor measures impacts and instantly informs the control unit to trigger the air bags, increasing occupants' security. Known for its optimality, the Ford E-150 Air Bag Sensor is mainly special for matching some E-150 models and they have been upgraded over the years with emphasis made on the accuracy rate and performance. The efficient use of technology in the manufacture of the Air Bag Sensor go a long way in proving the reliability part of the overall efficiency of Fords in the market. The vehicle under consideration is the Ford E-150, which belongs to the half-ton class and has gone through several generations starting from 1957; The Air Bag Sensor is an essential part of the vehicle's safety throughout the years. Being suitable to be installed in a variety of E-150 models, the Air Bag Sensor plays a role not only in improving the car's safety features but also in facilitating driving. The Ford E-150 Air Bag Sensor is a clear representative that the brand cares about its buyers and wants every trip to be as comfortable as possible for passengers, thus, strengthening the tradition of creating reliable vehicles with the primary focus on the safety and protection of people inside Ford vehicles.

Ford E-150 Air Bag Sensor Parts and Q&A

Diagnostic Module
6C2Z-14B321-BA
Q: What Precautions Should Be Taken When Servicing the Front Air Bag Sensor on Ford E-150?
A:
For front impact severity sensor servicing the driver should use safety glasses to protect themselves from accidental Air Bag deployment incidents. Vehicle sensor orientation must be checked to maintain proper system functioning while inspections of sensor mounting brackets and supplemental restraint wiring pigtail happen for deformation and all damaged components need proper replacement before sensor installation even if air bags did not trigger. Memory saver devices should never be utilized because they create safety hazards for humans. The air bag warning lamp turns on during this condition because of the removed RCM fuse when the Ignition Switch is ON. This normal state does not indicate any problems with the supplemental restraint system. Check that the SRS functions properly along with its faultless operation before handing over the vehicle to customers. The repair work should start with new part installation followed by original part reinstallation when the issue remains to perform diagnostic check again. Begin with depowering the system before unfastening the top radiator grille screws while pulling it forwards to unlock lower mounting clips. The front air foil needs to be lowered and the electrical connector must be detached from the front impact severity sensor before sensor boltted access becomes possible. The correct system operation depends on tightening every retaining bolt of the front impact severity sensor to 12 Nm (9 lb-ft) while maintaining clean and debris-free surfaces between the sensor and radiator support. Recharge the system following the reverse order of uninstallation then replace the sensor along with its two bolts.