How to service and repair the driveshaft slip yoke on Ford E-150?

A proper workbench serves as the starting point for slip yoke repair work by placing the driveshaft there but avoid trapping it using a vise. The driveshaft slip-yoke service starts with clip removal of the slip-yoke boot clamps before extracting both the slip-yoke and boot from the driveshaft. Thoroughly check the boot for any signs of damage before proceeding to replace it. The inspection should start with checking the driveshaft spline lubricant as well as the slip-yoke's lubricant status. Both components need replacing if they show signs of wear or contain contaminations. To install the new slip-yoke boot clamp place it on the driveshaft stub shaft then insert the small opening of the slip-yoke boot onto the stub shaft. Use the Keystone Clamp Installer to secure the slip-yoke boot clamp after which attach the slip-yoke to the driveshaft through putting the boot end into the driveshaft while providing approximately 10g (0.24oz) of grease to the splines. Begin by placing a new large slip-yoke boot clamp then set the blind splines correctly before installing the slip-yoke. Measure the assembled driveshaft length from stub shaft weld to U-joint centerline before evaluating slip-yoke boot position in its groove and removing boot and slip-yoke surface grease. The slip-yoke boot needs air bleeding before using the Keystone Clamp Installer to secure the large slip-yoke boot clamp.

OEM Ford E-150 Slip Yoke

Transmission Slip Yoke

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Slip Yokes found

View related parts
Ford E-150 Slip Yoke
Part Number: 6W1Z-4841-A
$172.55 MSRP: $251.17
You Save: $78.62 (32%)
ADD TO CART
Product Specifications
- Other Name: Flange - Coupling; Double Cardan CV Centering Yoke; Driveshaft Yokes
- Replaces: F7UZ-4841-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2007 Ford E-150 | Base, Chateau, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford E-150 Slip Yoke
Part Number: 5C2Z-4841-A
$166.25 MSRP: $242.00
You Save: $75.75 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Flange - Coupling; Double Cardan CV Centering Yoke; Driveshaft Yokes
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2011 Ford E-150 | Base, XL, XLT | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
Ford E-150 Intermediate Shaft, Center
Part Number: 6C2Z-3E751-AA
$185.70 MSRP: $249.51
You Save: $63.81 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Steering; Steering Shaft Universal Joint; Steering Shaft, Center; Shaft Assembly; Intermed Shaft; Coupling; Steering Shaft
- Position: Center
- Replaces: 1C2Z-3E751-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2014 Ford E-150 | Base, Chateau, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
Ford E-150 Companion Flange
Part Number: 9C2Z-4851-A
$78.27 MSRP: $120.45
You Save: $42.18 (36%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Flange
- Replaces: F7UZ-4851-AA, 6C2Z-4851-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2014 Ford E-150 | Base, XL, XLT | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
Ford E-150 Slip Yoke
Part Number: F7UZ-4841-AA
Product Specifications
- Other Name: Yoke Assembly; Double Cardan CV Centering Yoke; Driveshaft Yokes
- Replaces: F5TZ-4841-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004 Ford E-150 | Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford E-150 Universal Joints, Rear
Part Number: BU2Z-4635-A
Product Specifications
- Other Name: Kit - Universal Joint Repair; Drive Shaft Slip Yoke, Rear; CV Joint; U Joint; Flange; Coupling
- Position: Rear
- Replaces: 4L3Z-4782-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2014 Ford E-150 | Base, XL, XLT | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG

Ford E-150 Slip Yoke

Welcome to our website where you can discover high-quality, genuine Ford E-150 Slip Yoke. We offer an extensive inventory of OEM Ford E-150 Slip Yoke at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford E-150 Slip Yoke Parts Questions & Experts Answers

Slip Yoke
5C2Z-4841-A
Q: How to service and repair the driveshaft slip yoke on Ford E-150?
A: A proper workbench serves as the starting point for slip yoke repair work by placing the driveshaft there but avoid trapping it using a vise. The driveshaft slip-yoke service starts with clip removal of the slip-yoke boot clamps before extracting both the slip-yoke and boot from the driveshaft. Thoroughly check the boot for any signs of damage before proceeding to replace it. The inspection should start with checking the driveshaft spline lubricant as well as the slip-yoke's lubricant status. Both components need replacing if they show signs of wear or contain contaminations. To install the new slip-yoke boot clamp place it on the driveshaft stub shaft then insert the small opening of the slip-yoke boot onto the stub shaft. Use the Keystone Clamp Installer to secure the slip-yoke boot clamp after which attach the slip-yoke to the driveshaft through putting the boot end into the driveshaft while providing approximately 10g (0.24oz) of grease to the splines. Begin by placing a new large slip-yoke boot clamp then set the blind splines correctly before installing the slip-yoke. Measure the assembled driveshaft length from stub shaft weld to U-joint centerline before evaluating slip-yoke boot position in its groove and removing boot and slip-yoke surface grease. The slip-yoke boot needs air bleeding before using the Keystone Clamp Installer to secure the large slip-yoke boot clamp.