How to service and repair the rear brake disc on Ford E-250 Econoline?

Begin the service and repair process of E-250 and E-350 Single Rear Wheel rear brake discs by removing the anchor plate. Mark the brake disc first then you can begin its removal process. Installation of the new brake disc becomes a matter of reversing the removal process in order.

How to service and repair the front brake disc on Ford E-250 Econoline?

The service and repair process for front brake rotor/disc on E-250, E-350, E-450 models requires removal of the front disc brake caliper anchor plate first. Start brake disc and hub removal by taking out the hub grease cap followed by the cotter pin, nut retainer, spindle nut, front wheel outer bearing retainer washer and outer front wheel bearing before proceeding to the brake disc and hub. When resurfacing becomes essential the lathe manufacturer should provide instructions to perform on-vehicle machining that requires removal of the wheel hub grease seal combined with the inner front wheel bearing. When installing the components workers should use Metal Brake Parts Cleaner F3AZ-19579-SA or an equivalent cleaner to clean and inspect front wheel bearings and brake disc and hub. The installation consists of applying Premium Long-Life Grease XG-1-C or -K or Ford specification ESA-M1C75-B equivalent material to the front wheel bearings before inserting a wheel hub grease seal and an inner front wheel bearing followed by a second wheel hub grease seal. First fit the brake disc together with the hub before placing the outer front wheel bearing and the front wheel outer bearing retainer washer. The spindle nut installation requires rotating the brake disc and hub while you tighten it and complete two final loosenings before a proper tightening. Twist the spindle nut twice as you rotate the brake disc and hub before retightening it with additional rotations of the brake disc followed by another nut loosening and tightening operation. The final installation steps include placing the nut retainer and cotter pin and hub grease cap together with the front disc brake caliper anchor plate.

OEM Ford E-250 Econoline Brake Disc

Disc Rotor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Brake Discs found

View related parts
Ford E-250 Econoline Hub & Rotor, Front Part Number: YC2Z-1V102-BA
$101.05 MSRP: $137.51
You Save: $36.46 (27%)
ADD TO CART
Product Specifications
- Other Name: Hub And Disc Assembly; Disc Brake Rotor and Hub Assembly, Front; Wheel Hub Repair Kit; Wheel Hub; Rotor; Brake Rotor
- Manufacturer Note: Front, With 4 wheel ABS - single rear wheel, With 8 mtg holes
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1994-1995 Ford E-250 Econoline | Base, XL | 6 Cyl 4.9 L BI-FUEL, 6 Cyl 4.9 L GAS, 8 Cyl 5.8 L GAS
View related parts
Ford E-250 Econoline Hub & Rotor Part Number: YC3Z-1V102-CB
$79.55 MSRP: $119.98
You Save: $40.43 (34%)
ADD TO CART
Product Specifications
- Other Name: Hub And Disc Assembly; Wheel Hub Repair Kit; Brake Rotor; Wheel Hub; Hub; Rotor
- Replaces: E7TZ-1102-C, BRR-42, YC3Z-1V102-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1990-1991 Ford E-250 Econoline | Custom, XL | 6 Cyl 4.9 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.8 L GAS
View related parts
Ford E-250 Econoline Rotor Part Number: YC2Z-1V125-A
$91.59 MSRP: $133.32
You Save: $41.73 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly
- Replaces: BRR-71, YC2Z-1V125-BB, XC2Z-2C026-AA, BRRF-53, BRR-265, YC2Z-1V125-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2002 Ford E-250 Econoline | Base, XL | 6 Cyl 4.2 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Econoline Hub & Rotor, Front Part Number: YL3Z-1V102-GB
$86.63 MSRP: $133.32
You Save: $46.69 (36%)
ADD TO CART
Product Specifications
- Other Name: Hub And Disc Assembly; Disc Brake Rotor and Hub Assembly, Front; Wheel Hub Repair Kit; Brake Rotor; Wheel Hub; Rotor
- Position: Front
- Replaced by: YL3Z-1V102-GC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1984-1991 Ford E-250 Econoline | Base, Custom, XL | 6 Cyl 4.9 L GAS, 6 Cyl 4.9 L LPG, 8 Cyl 5.0 L GAS, 8 Cyl 5.8 L GAS
View related parts
Ford E-250 Econoline Hub & Rotor, Front Part Number: GU2Z-1V102-A
$104.96 MSRP: $158.32
You Save: $53.36 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub And Disc Assembly; Disc Brake Rotor and Hub Assembly, Front; Rotor
- Manufacturer Note: Non Warranty Repair
- Position: Front
- Replaced by: GU2Z-1V102-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1995-2002 Ford E-250 Econoline | Base, XL | 6 Cyl 4.2 L GAS, 6 Cyl 4.9 L BI-FUEL, 6 Cyl 4.9 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS
View related parts
Ford E-250 Econoline Rotor, Rear Part Number: F6UZ-2C026-AA
$152.49 MSRP: $230.00
You Save: $77.51 (34%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly - Brake; Disc Brake Rotor, Rear; Disc - Brake; Disc Brake Rotor; Brake Rotor
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002, 1999 Ford E-250 Econoline | Base | 6 Cyl 4.2 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Econoline Hub & Rotor, Front Part Number: F8UZ-1102-B
Product Specifications
- Other Name: Hub Assembly - Wheel; Front Disc Brake Rotor and Hub Assembly; Wheel Hub Repair Kit; Brake Rotor; Rotor
- Position: Front
- Replaces: F8UZ-1102-AA, F8UZ-1102-AB, BRRF-33
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1995-2002 Ford E-250 Econoline | Base, XL | 6 Cyl 4.2 L GAS, 6 Cyl 4.9 L BI-FUEL, 6 Cyl 4.9 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS
View related parts
Ford E-250 Econoline Rotor Part Number: F5TZ-1102-D
Product Specifications
- Other Name: Hub Assembly - Wheel; Brake Rotor
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-1999 Ford E-250 Econoline | Base | 6 Cyl 4.2 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Econoline Hub & Rotor, Front Part Number: F4UZ-1102-F
Product Specifications
- Other Name: Hub And Bearing Cup; Disc Brake Rotor and Hub Assembly, Front; Wheel Hub Repair Kit; Brake Rotor; Wheel Hub; Hub; Rotor
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1990-1994 Ford E-250 Econoline | Base, Custom, XL | 6 Cyl 4.9 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.8 L GAS
View related parts
Ford E-250 Econoline Hub & Rotor, Front Part Number: YC2Z-1V102-AA
Product Specifications
- Other Name: Hub And Disc Assembly; Disc Brake Rotor and Hub Assembly, Front; Wheel Hub Repair Kit; Wheel Hub; Rotor; Brake Rotor
- Manufacturer Note: Front, with RABS - single rear wheel
- Position: Front
- Replaces: F4UZ-1102-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-1995 Ford E-250 Econoline | Base, XL | 6 Cyl 4.9 L BI-FUEL, 6 Cyl 4.9 L GAS, 8 Cyl 5.8 L GAS

Ford E-250 Econoline Brake Disc

OEM Brake Disc boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Brake Disc with long life and a perfect fit. Come to our website and find genuine Ford E-250 Econoline parts. We keep a wide inventory of OEM E-250 Econoline parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Ford E-250 Econoline Brake Disc Parts and Q&A

Rotor, Rear
F6UZ-2C026-AA
Q: How to service and repair the rear brake disc on Ford E-250 Econoline?
A:
Begin the service and repair process of E-250 and E-350 Single Rear Wheel rear brake discs by removing the anchor plate. Mark the brake disc first then you can begin its removal process. Installation of the new brake disc becomes a matter of reversing the removal process in order.
Rotor
YC2Z-1V125-A
Q: How to service and repair the front brake disc on Ford E-250 Econoline?
A:
The service and repair process for front brake rotor/disc on E-250, E-350, E-450 models requires removal of the front disc brake caliper anchor plate first. Start brake disc and hub removal by taking out the hub grease cap followed by the cotter pin, nut retainer, spindle nut, front wheel outer bearing retainer washer and outer front wheel bearing before proceeding to the brake disc and hub. When resurfacing becomes essential the lathe manufacturer should provide instructions to perform on-vehicle machining that requires removal of the wheel hub grease seal combined with the inner front wheel bearing. When installing the components workers should use Metal Brake Parts Cleaner F3AZ-19579-SA or an equivalent cleaner to clean and inspect front wheel bearings and brake disc and hub. The installation consists of applying Premium Long-Life Grease XG-1-C or -K or Ford specification ESA-M1C75-B equivalent material to the front wheel bearings before inserting a wheel hub grease seal and an inner front wheel bearing followed by a second wheel hub grease seal. First fit the brake disc together with the hub before placing the outer front wheel bearing and the front wheel outer bearing retainer washer. The spindle nut installation requires rotating the brake disc and hub while you tighten it and complete two final loosenings before a proper tightening. Twist the spindle nut twice as you rotate the brake disc and hub before retightening it with additional rotations of the brake disc followed by another nut loosening and tightening operation. The final installation steps include placing the nut retainer and cotter pin and hub grease cap together with the front disc brake caliper anchor plate.