How to service and repair the power steering pump on Ford E-250?

The power steering pump servicing requires starting with pulley removal of the power steering pump. You should utilize a proper suction device to take out the power steering fluid from the reservoir. The service begins with removing and discarding the Teflon® seal from the power steering pump supply hose while disconnecting both supply hose and pressure line-to-pump fitting. The pump installation should use a torque of 55 Nm (41 lb-ft). First tighten the power steering pump bolts to 26 Nm (19 lb-ft) then uninstall the pump itself before reinstallation. All installations of new Teflon® seals at the pressure line-to-pump fitting must be performed when the line gets disconnected. The Teflon® Seal Installer Set should be used for this installation procedure. Concerning power steering system completion you should execute the filling procedure.

OEM Ford E-250 Power Steering Pump

Power Steering Pump Unit

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Power Steering Pumps found

View related parts
Ford E-250 Power Steering Pump Part Number: 2C2Z-3A674-EARM
$111.36 MSRP: $180.64
You Save: $69.28 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Remanufactured Pump Assembly - Power Steering; Pump Assembly - Power Steering
- Replaces: 1C2Z-3A674-BARM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2007 Ford E-250 | Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Power Steering Pump Part Number: BC2Z-3A696-B
$362.61 MSRP: $600.00
You Save: $237.39 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly - Power Steering; Steering Pump, Mech
- Manufacturer Note: With Pulley
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2014 Ford E-250 | Base | 8 Cyl 4.6 L FLEX, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L LPG
View related parts
Ford E-250 Power Steering Pump Part Number: FOUZ-3A674-A
Product Specifications
- Other Name: Pump Assembly - Power Steering
- Manufacturer Note: Parts List No. 8, stripped chassis or RV cutaway (Saginaw) - has an inlet nipple on top
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004 Ford E-250 | Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Power Steering Pump Part Number: 7C2Z-3A674-CRM
$133.44 MSRP: $209.56
You Save: $76.12 (37%)
Product Specifications
- Other Name: Remanufactured Pump Assembly - Power Steering; Pump Assembly - Power Steering
- Replaces: 7C2Z-3A674-CB, STP-216, 7C2Z-3A674-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2010 Ford E-250 | Base | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG

Ford E-250 Power Steering Pump

OEM Power Steering Pump boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Power Steering Pump with long life and a perfect fit. Come to our website and find genuine Ford E-250 parts. We keep a wide inventory of OEM E-250 parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Ford E-250 Power Steering Pump is such an important part since it transforms power from the engine into hydraulic power for ease in steering the vehicle most especially at low speeds or when the vehicle is stationary. Highly regarded for is durability and efficiency, the Ford E-250 Power Steering Pump offers sufficient amount of pressure in the depressing of the power steering to enable the driver to easily navigate his/her car. This pump ranges with different models of E-250 so that different E-250 generation car drivers can realize this pump's productivity and security measures. The actual Ford Power Steering Pump is mechanically linked, often by the crankshaft with a V-belt or serpentine belt, proving its durability. The evolvement of power steering allowed for the development of electronic system, which adjusts the responsiveness of the Ford E-250 Power Steering Pump in relation to speed and input from the steering wheel. It also positively impacts control and general vehicle safety as well in this evolution. Significantly, the Ford Power Steering Pump is well-produced for preventing leaks and noisy to provide a steady power assist. This integration is apparent in the build of the new E-250 by Ford, a clear indication of the company's statement to market quality and innovative products, such as the Ford E-250 Power Steering Pump that is central to the excellence of automotive performance and needs of car driving in the market.

Ford E-250 Power Steering Pump Parts and Q&A

Power Steering Pump
7C2Z-3A674-CRM
Q: How to service and repair the power steering pump on Ford E-250?
A:
The power steering pump servicing requires starting with pulley removal of the power steering pump. You should utilize a proper suction device to take out the power steering fluid from the reservoir. The service begins with removing and discarding the Teflon® seal from the power steering pump supply hose while disconnecting both supply hose and pressure line-to-pump fitting. The pump installation should use a torque of 55 Nm (41 lb-ft). First tighten the power steering pump bolts to 26 Nm (19 lb-ft) then uninstall the pump itself before reinstallation. All installations of new Teflon® seals at the pressure line-to-pump fitting must be performed when the line gets disconnected. The Teflon® Seal Installer Set should be used for this installation procedure. Concerning power steering system completion you should execute the filling procedure.