How to Service and Install a Sway Bar Link and Sway Bar Kit on Ford Explorer?

Start sway bar link service procedures by uninstalling the wheel along with tire components. The service requires removing both Sway Bar Kit-to-link nuts before taking out the two Sway Bar Kit studs. Install the new studs by torquing them to 25 Nm (18 ft. lbs.). After removing the wheel accessories you should take out both sway bar links while discarding the four Sway Bar Kit-to-frame nuts before tightening the new ones to 55 Nm (41 ft. lbs.) during the installation process. Uninstall the sway bar insulators before disconnecting the right-hand upper ball joint by unfastening the nut but safeguard the boot to avoid damage while tightening the new nut to 90 Nm (66 ft. lbs.) torque. The brake caliper should never dangle from the hose during maintenance, so brake caliper bolts must be removed to set it aside while tightening the caliper to 32 Nm (24 ft. lbs.) when reinstallation occurs. The first process involves removing both the Sway Bar Kit from the right-hand side of the vehicle and unclipping the vapor line from the fuel tank. The procedure requires a reversal of steps for installation while using fresh Sway Bar Kit-to-link nuts and Sway Bar Kit-to-frame nuts throughout.

OEM Ford Explorer Sway Bar Kit

Stabilizer Sway Bar Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

15 Sway Bar Kits found

View related parts
Ford Explorer Stabilizer Bar, Rear
Part Number: 3L2Z-5A772-CA
$32.19 MSRP: $44.53
You Save: $12.34 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Rear Stabilizer; Suspension Stabilizer Bar, Rear; Sway Bar
- Position: Rear
- Replaces: 1L2Z-5A772-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002-2005 Ford Explorer | Eddie Bauer, Limited, NBX, Postal, XLS, XLS Sport, XLT, XLT Sport | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Ford Explorer Stabilizer Bar, Front
Part Number: 4L2Z-5482-DA
$65.40 MSRP: $90.47
You Save: $25.07 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Stabilizer; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002-2005 Ford Explorer | Eddie Bauer, Limited, NBX, Postal, XLS, XLS Sport, XLT, XLT Sport | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Ford Explorer Stabilizer Bar
Part Number: BB5Z-5A772-A
$137.40 MSRP: $200.00
You Save: $62.60 (32%)
ADD TO CART
Product Specifications
- Other Name: Bar - Stabilizer; Suspension Stabilizer Bar, Rear; Sway Bar
- Replaces: 8A8Z-5A772-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2019 Ford Explorer | Base, Limited, Platinum, Sport, XLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
Ford Explorer Stabilizer Bar, Front
Part Number: BB5Z-5482-A
$147.71 MSRP: $215.00
You Save: $67.29 (32%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Bar Assembly - Roll; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2019 Ford Explorer | Base, Limited, Platinum, Sport, XLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
Ford Explorer Stabilizer Bar, Front
Part Number: F87Z-5482-CA
$69.10 MSRP: $85.47
You Save: $16.37 (20%)
ADD TO CART
Product Specifications
- Other Name: Bar - Stabilizer; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2001 Ford Explorer | Eddie Bauer, Limited, Postal, Sport, XL, XL Fleet, XLS, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 5.0 L GAS
View related parts
Ford Explorer Stabilizer Bar
Part Number: LB5Z-5A772-B
$147.36 MSRP: $214.50
You Save: $67.14 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Stabilizer; Suspension Stabilizer Bar, Rear; Sway Bar
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2023 Ford Explorer | ST, ST-Line | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Ford Explorer Stabilizer Bar
Part Number: LB5Z-5A772-A
$139.69 MSRP: $203.33
You Save: $63.64 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Stabilizer; Suspension Stabilizer Bar, Rear; Sway Bar
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2023 Ford Explorer | Base, King Ranch, Limited, Limited Hybrid, Platinum, Platinum Hybrid, Timberline, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV)
View related parts
Ford Explorer Stabilizer Bar, Front
Part Number: LB5Z-5482-B
$181.37 MSRP: $264.00
You Save: $82.63 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar Assembly - Roll; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2023 Ford Explorer | Base, King Ranch, Limited, Platinum, ST, ST-Line, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Ford Explorer Stabilizer Bar, Front
Part Number: LB5Z-5482-A
$180.11 MSRP: $262.17
You Save: $82.06 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar Assembly - Roll; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2023 Ford Explorer | Base, King Ranch, Limited, Limited Hybrid, Platinum, Platinum Hybrid, ST-Line, Timberline, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV)
View related parts
Ford Explorer Stabilizer Bar, Front
Part Number: EB5Z-5482-A
$162.00 MSRP: $250.00
You Save: $88.00 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar Assembly - Roll; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2014-2019 Ford Explorer | Platinum, Sport | 6 Cyl 3.5 L GAS
View related parts
Ford Explorer Stabilizer Bar, Rear
Part Number: 9L2Z-5A772-A
Product Specifications
- Other Name: Bar - Rear Stabilizer; Suspension Stabilizer Bar, Rear; Sway Bar
- Position: Rear
- Replaces: 6L2Z-5A772-AA, 6L2Z-5A772-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2010 Ford Explorer | Eddie Bauer, Limited, XLS, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Ford Explorer Stabilizer Bar, Front
Part Number: 9L2Z-5482-A
Product Specifications
- Other Name: Bar - Stabilizer; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
- Replaces: 6L2Z-5482-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2010 Ford Explorer | Eddie Bauer, Limited, XLS, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Ford Explorer Stabilizer Bar, Rear
Part Number: 3C5Z-5A772-BA
Product Specifications
- Other Name: Bar - Stabilizer; Suspension Stabilizer Bar, Rear; Sway Bar
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2005 Ford Explorer | Eddie Bauer, Limited, NBX, XLS, XLS Sport, XLT, XLT Sport | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Ford Explorer Stabilizer Bar, Rear
Part Number: F57Z5A772A
Product Specifications
- Other Name: Bar - Stabilizer; Suspension Stabilizer Bar, Rear; Sway Bar
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1995-2001 Ford Explorer | Eddie Bauer, Expedition, Limited, Postal, Sport, XL, XL Fleet, XLS, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 5.0 L GAS
View related parts
Ford Explorer Stabilizer Bar
Part Number: F57Z-5A772-B
$34.43 MSRP: $48.83
You Save: $14.40 (30%)
Product Specifications
- Other Name: Bar - Stabilizer; Suspension Stabilizer Bar, Rear; Sway Bar
- Manufacturer Note: Stabilizer, Standard susp.
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1995-2001 Ford Explorer | Eddie Bauer, Expedition, Limited, Postal, Sport, XL, XL Fleet, XLS, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 5.0 L GAS

Ford Explorer Sway Bar Kit

Welcome to our website where you can discover high-quality, genuine Ford Explorer Sway Bar Kit. We offer an extensive inventory of OEM Ford Explorer Sway Bar Kit at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford Explorer Sway Bar Kit Parts Questions & Experts Answers

Stabilizer Bar, Front
4L2Z-5482-DA
Q: How to Service and Install a Sway Bar Link and Sway Bar Kit on Ford Explorer?
A: Start sway bar link service procedures by uninstalling the wheel along with tire components. The service requires removing both Sway Bar Kit-to-link nuts before taking out the two Sway Bar Kit studs. Install the new studs by torquing them to 25 Nm (18 ft. lbs.). After removing the wheel accessories you should take out both sway bar links while discarding the four Sway Bar Kit-to-frame nuts before tightening the new ones to 55 Nm (41 ft. lbs.) during the installation process. Uninstall the sway bar insulators before disconnecting the right-hand upper ball joint by unfastening the nut but safeguard the boot to avoid damage while tightening the new nut to 90 Nm (66 ft. lbs.) torque. The Brake Caliper should never dangle from the hose during maintenance, so brake caliper bolts must be removed to set it aside while tightening the caliper to 32 Nm (24 ft. lbs.) when reinstallation occurs. The first process involves removing both the Sway Bar Kit from the right-hand side of the vehicle and unclipping the vapor line from the fuel tank. The procedure requires a reversal of steps for installation while using fresh Sway Bar Kit-to-link nuts and Sway Bar Kit-to-frame nuts throughout.