How to Service and Repair the Steering Shaft on Ford F-150?

Initiating repairs or servicing of the steering column shaft begins with hoisting the vehicle when the transmission is set to neutral. The Hunter (R) 28-75-1 steering wheel holding device along with similar alternatives should maintain the steering wheel at a straight-ahead position. Preventing the steering column shaft from rotating during intermediate shaft disconnect is essential because it can damage the clock spring; when rotation does occur the clock spring needs to be recentered. Begin the procedure by removing the bolt from the upper steering column shaft to disconnect it from the steering column before installing a new bolt which should be tightened to 30 Nm (22 lb-ft). Detach the upper steering column shaft from the lower steering column shaft by removing the bolt which you should discard before installing a fresh bolt that requires tightening to 48 Nm (35 lb-ft). The correct installation of new bolts requires a torque setting of 12 Nm (106 lb-in) while you also need to replace the two bolts together with the dash seal and upper steering column shaft. Splice the lower steering column shaft from its position on the steering gear by removing the bolt and disposing it and replacing it with a new bolt which should then be tightened to 30 Nm (22 lb-ft). Steering column shaft bolts must always be replaced with new ones since their reuse will result in fastener failure and dangerous loss of steering control responsible for vehicle occupant safety risks. Perform the installation step by following the reverse order of the removal process.

OEM Ford F-150 Steering Shaft

Steering Stem Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

21 Steering Shafts found

View related parts
Ford F-150 Upper Shaft Part Number: F7DZ-7361-A
$44.32 MSRP: $54.82
You Save: $10.50 (20%)
ADD TO CART
Product Specifications
- Other Name: Plunger - Gear Change Shaft Lock; Steering Shaft; Shift Lever Shaft; Shift Tube Shaft; Plunger; Shaft
- Replaces: F7DZ-7R264-AA, FODZ-7R264-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-2003 Ford F-150 | Base, Custom, Eddie Bauer, Harley-Davidson Edition, King Ranch, Lariat, Lightning, Special, XL, XLT, XLT Lariat | 6 Cyl 4.2 L GAS, 6 Cyl 4.9 L BI-FUEL, 6 Cyl 4.9 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS
View related parts
Ford F-150 Steering Shaft, Upper Part Number: F5TZ-3524-A
$125.09 MSRP: $192.50
You Save: $67.41 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft; Steering Shaft, Upper; Shaft Assembly; Upper Shaft
- Position: Upper
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-2004 Ford F-150 | Base, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lightning, STX, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
Ford F-150 Lower Shaft Part Number: 8L3Z-3B676-B
$250.84 MSRP: $401.82
You Save: $150.98 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly; Steering Shaft, Lower; Steering Shaft
- Position: Lower
- Replaces: 8L3Z-3B676-A, 7L3Z-3B676-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2008 Ford F-150 | FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Limited, STX, THE 60TH ANNIVERSARY EDITION, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
Ford F-150 Steering Column, Upper Part Number: F2UZ-3524-A
$180.58 MSRP: $278.67
You Save: $98.09 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Steering; Steering Shaft, Upper; Steering Shaft; Shaft Assembly; Upper Shaft; Shaft; Mainshaft
- Position: Upper
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-2004 Ford F-150 | Base, Custom, Eddie Bauer, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lightning, Special, STX, XL, XLT, XLT Lariat | 6 Cyl 4.2 L GAS, 6 Cyl 4.9 L BI-FUEL, 6 Cyl 4.9 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS
View related parts
Ford F-150 Lower Shaft Part Number: 8L1Z-3B676-A
$216.79 MSRP: $347.27
You Save: $130.48 (38%)
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly; Steering Shaft Universal Joint; Steering Shaft, Lower; Lower Coupling; Steering Shaft
- Position: Lower
- Replaces: 7L1Z-3B676-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2010 Ford F-150 | FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Platinum, STX, SVT Raptor, XL, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Ford F-150 Intermediate Shaft, Center Part Number: 7L1Z-3E751-A
$247.20 MSRP: $363.00
You Save: $115.80 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Steering; Steering Shaft, Center; Center Shaft; Intermed Shaft; Steering Shaft
- Position: Center
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2010 Ford F-150 | FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Platinum, STX, SVT Raptor, XL, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Ford F-150 Intermediate Shaft, Center Part Number: BL3Z-3E751-B
$190.37 MSRP: $277.10
You Save: $86.73 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Steering; Steering Shaft, Center; Intermed Shaft; Steering Shaft
- Position: Center
- Replaces: BL3Z-3E751-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2014 Ford F-150 | FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lariat Limited, Limited, Platinum, STX, SVT Raptor, XL, XLT | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L CNG, 6 Cyl 3.7 L FLEX, 6 Cyl 3.7 L LPG, 8 Cyl 5.0 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Ford F-150 Intermediate Shaft Part Number: F2TZ-3E751-B
$191.27 MSRP: $295.17
You Save: $103.90 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Steering; Coupling Shaft; Shaft Assembly; Shaft
- Replaces: F2TZ-3B676-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-1996 Ford F-150 | Custom, Eddie Bauer, Lightning, Special, XL, XLT, XLT Lariat | 6 Cyl 4.9 L BI-FUEL, 6 Cyl 4.9 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.8 L GAS
View related parts
Ford F-150 Upper Shaft Part Number: 9L3Z-3B676-A
$148.50 MSRP: $229.17
You Save: $80.67 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Steering; Steering Shaft, Upper; Steering Shaft
- Position: Upper
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2014 Ford F-150 | FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lariat Limited, Limited, Platinum, STX, SVT Raptor, XL, XLT | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L CNG, 6 Cyl 3.7 L FLEX, 6 Cyl 3.7 L LPG, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L FLEX, 8 Cyl 5.4 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Ford F-150 Lower Shaft Part Number: HL3Z-3B676-A
$233.47 MSRP: $342.83
You Save: $109.36 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly; Steering Shaft, Lower; Steering Shaft
- Position: Lower
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2020 Ford F-150 | King Ranch, Lariat, Limited, Platinum, Raptor, SSV, XL, XLT | 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.3 L FLEX, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 8 Cyl 5.0 L FLEX
View related parts
Ford F-150 Intermediate Shaft, Upper Part Number: HL3Z-3E751-F
$242.21 MSRP: $355.67
You Save: $113.46 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Steering; Steering Shaft, Upper; Steering Shaft; Upper Shaft
- Position: Upper
- Replaces: FL3Z-3E751-B, HL3Z-3E751-E, FL3Z-3E751-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2020 Ford F-150 | King Ranch, Lariat, Limited, Platinum, Police Responder, Raptor, SSV, XL, XLT | 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.3 L FLEX, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 8 Cyl 5.0 L FLEX
View related parts
Ford F-150 Intermediate Shaft Part Number: ML3Z-3E751-B
$262.19 MSRP: $385.00
You Save: $122.81 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Steering; Upper Shaft
- Replaces: ML3Z-3E751-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2021-2023 Ford F-150 | King Ranch, Lariat, Limited, Platinum, Police Responder, Raptor, Raptor R, SSV, Tremor, XL, XLT | 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.3 L FLEX, 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS, 8 Cyl 5.0 L FLEX, 8 Cyl 5.2 L GAS
View related parts
Ford F-150 Lower Shaft Part Number: NL3Z-3B676-A
$279.66 MSRP: $410.67
You Save: $131.01 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly
- Replaced by: NL3Z-3B676-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2022-2023 Ford F-150 | Raptor, Raptor R | 6 Cyl 3.5 L GAS, 8 Cyl 5.2 L GAS
View related parts
Ford F-150 Intermediate Shaft, Upper Part Number: HL3Z-3E751-G
$257.19 MSRP: $377.67
You Save: $120.48 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Steering; Steering Shaft, Upper; Steering Shaft; Upper Shaft
- Position: Upper
- Replaces: HL3Z-3E751-D, HL3Z-3E751-B, HL3Z-3E751-C, HL3Z-3E751-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2020 Ford F-150 | King Ranch, Lariat, Limited, Platinum, Police Responder, Raptor, SSV, XL, XLT | 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.3 L FLEX, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 8 Cyl 5.0 L FLEX
View related parts
Ford F-150 Lower Shaft Part Number: ML3Z-3B676-A
$237.22 MSRP: $348.33
You Save: $111.11 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly; Steering Shaft Universal Joint, Lower; Steering Shaft
- Position: Lower
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2021-2023 Ford F-150 | King Ranch, Lariat, Limited, Platinum, Police Responder, Raptor, Raptor R, SSV, Tremor, XL, XLT | 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.3 L FLEX, 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS, 8 Cyl 5.0 L FLEX, 8 Cyl 5.2 L GAS
View related parts
Ford F-150 Shaft Assembly Part Number: F7TZ-3B676-AA
Product Specifications
- Other Name: Steering Shaft; Lower Shaft; Shaft
- Replaces: F6TZ-3B676-FA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-1996 Ford F-150 | Custom, Eddie Bauer, Lightning, Special, XL, XLT, XLT Lariat | 6 Cyl 4.9 L BI-FUEL, 6 Cyl 4.9 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.8 L GAS
View related parts
Ford F-150 Lower Shaft Part Number: F75Z-3B676-CA
Product Specifications
- Other Name: Shaft Assembly; Steering Shaft, Lower; Steering Shaft
- Position: Lower
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-2004 Ford F-150 | Base, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lightning, STX, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
Ford F-150 Lower Shaft Part Number: 3L3Z-3B676-AA
Product Specifications
- Other Name: Shaft Assembly; Steering Shaft, Lower; Steering Shaft
- Position: Lower
- Replaces: F75Z-3B676-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003 Ford F-150 | Harley-Davidson Edition, King Ranch, Lariat, Lightning, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
Ford F-150 Shaft Assembly Part Number: E8TZ-3B676-A
Product Specifications
- Other Name: Coupling And Universal Joint - Steering; Steering Shaft; Lower Shaft; Upper Shaft; Mainshaft; Coupling And Uj - Steering Shaft
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1984-1991 Ford F-150 | Base, Custom, XL, XLT, XLT Lariat | 6 Cyl 4.9 L GAS, 6 Cyl 4.9 L LPG, 8 Cyl 5.0 L GAS, 8 Cyl 5.8 L GAS, 8 Cyl 6.9 L DIESEL
View related parts
Ford F-150 Center Shaft, Upper Part Number: 7L3Z-3E751-A
Product Specifications
- Other Name: Shaft Assembly - Steering; Steering Shaft, Upper; Upper Shaft; Steering Shaft
- Position: Upper
- Replaces: 5L3Z-3E751-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2008 Ford F-150 | FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Limited, STX, THE 60TH ANNIVERSARY EDITION, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS

| Page 1 of 2 |Next >

1-20 of 21 Results

Ford F-150 Steering Shaft

OEM Steering Shaft boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Steering Shaft with long life and a perfect fit. Come to our website and find genuine Ford F-150 parts. We keep a wide inventory of OEM F-150 parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

One of the main components of Ford F-150 is the steering shaft & it corresponds to the nonpareil characteristics of this series of automobiles. This is the part that links the steering wheel to the wheels of the car in turn, providing maneuverability to the vehicle and smooth drive. Made from top notch materials as expected from a Ford vehicle, the F-150 Steering Shaft is durable to tackle the harshest of conditions which in one way or the other positively has an impact on the efficiency among other factors of safety. Thus, the compatibility of its design with diversified F-150 models throughout the generations indicates its flexibility to be a go-to preference for Ford lovers. The Steering Shaft is an important component of the total steering system and needs regular maintenance; a sign of potential trouble can be observed when there is a problem of steering or noises are heard which may betoken some scruffage on the shaft. In particular, Ford F-150 Steering Shaft has designed and incorporated advanced engineering in the vehicle that also helps in offering good handling and stability of the vehicle in the highly competitive market of automobiles. Steering Shaft is one of the salient features of the Ford F-150 truck that has been synonymous with strength since it was first manufactured in the year 1948. The Ford F-150 Steering Shaft helps in improving the Steering experience of the car whether on city roads or off roads; thus, the Ford F-150 will remain to be a reliable car. Thus, the Ford F-150 Steering Shaft reflects the Ford's greatest focus on quality and advanced technology and, therefore, might be considered a key factor of the F-150 series success and popularity.

Ford F-150 Steering Shaft Parts and Q&A

Lower Shaft
8L1Z-3B676-A
Q: How to Service and Repair the Steering Shaft on Ford F-150?
A:
Initiating repairs or servicing of the steering column shaft begins with hoisting the vehicle when the transmission is set to neutral. The Hunter (R) 28-75-1 Steering Wheel holding device along with similar alternatives should maintain the steering wheel at a straight-ahead position. Preventing the steering column shaft from rotating during intermediate shaft disconnect is essential because it can damage the Clock Spring; when rotation does occur the clock spring needs to be recentered. Begin the procedure by removing the bolt from the upper steering column shaft to disconnect it from the steering column before installing a new bolt which should be tightened to 30 Nm (22 lb-ft). Detach the upper steering column shaft from the lower steering column shaft by removing the bolt which you should discard before installing a fresh bolt that requires tightening to 48 Nm (35 lb-ft). The correct installation of new bolts requires a torque setting of 12 Nm (106 lb-in) while you also need to replace the two bolts together with the dash seal and upper steering column shaft. Splice the lower steering column shaft from its position on the steering gear by removing the bolt and disposing it and replacing it with a new bolt which should then be tightened to 30 Nm (22 lb-ft). Steering column shaft bolts must always be replaced with new ones since their reuse will result in fastener failure and dangerous loss of steering control responsible for vehicle occupant safety risks. Perform the installation step by following the reverse order of the removal process.