How to service and repair the timing cover on Ford F-350 Super Duty?

The procedure for timing cover service requires disconnecting the ground cable and uninstalling valve covers along with radiator and water pump before the work can commence. The service of bi-fuel vehicles requires removal of both compuvalve and vaporizer components. Position the power steering pump to the side by taking out the top bolts and the lower bolt after raising and supporting the vehicle. The service requires disconnecting the Crankshaft Position (CKP) sensor electrical connector along with draining the engine oil through the drain plug then unfastening all four front oil pan bolts before any vehicle position adjustment. The first step involves sealing removal as well as disconnecting electrical connections for both the crankshaft front seal and Camshaft Position (CMP) sensor. Begin by removing the (A) bolt then (B) belt idler pulley before taking out the rest of the bolts. Sealing surfaces require a plastic scraping tool for cleaning since metal scrapers together with abrasive tools should always be avoided. The installation requires removal of the engine front cover combined with its gasket and the front cover to cylinder block dowel. Clean both mating surfaces for inspection. Use the engine front cover gasket while adding silicone gasket and sealant onto the cylinder head to cylinder block interface and the oil pan to cylinder block interface for installation. Place the engine front cover with its gasket on the dowel before installing the bolts in a loose manner. Fasten the engine front cover fasteners by following a two-step procedure: first tighten fasteners 1 through 7 to 20 - 30 Nm (15 - 22 ft. lbs.) and continue by tightening fasteners 6 through 15 to 40 - 55 Nm (30 - 41 ft. lbs.). Connect the CMP electrical wiring before putting a new crankshaft front seal. Rise the vehicle using proper lifting equipment before installing the bolts loosely. Subsequent bolt tightening includes an initial torque until it reaches 20 Nm followed by an additional rotation of 60 degrees. The crankshaft position sensor electrical connector must be connected following which the power steering pump needs installation except for the exclusion of the front lower hole. Finally all bolts must be installed. The technician should replace the drain plug followed by vehicle lowering and installation of valve covers along with the water pump and compuvalve and vaporizer units for bi-fuel vehicles. The replacement process ends with filling the engine with clean engine oil followed by reinstallation of the battery ground cable.

OEM Ford F-350 Super Duty Timing Cover

Engine Timing Cover

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

14 Timing Covers found

View related parts
Ford F-350 Super Duty Timing Cover Part Number: 5C3Z-6019-BB
$722.25 MSRP: $1070.00
You Save: $347.75 (33%)
ADD TO CART
Product Specifications
- Other Name: Kit - Engine Installation Gasket; Engine Oil Pump; Front Cover
- Replaces: 5C3Z-6019-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford F-350 Super Duty | Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 8 Cyl 6.0 L DIESEL
View related parts
Ford F-350 Super Duty Oil Pump Part Number: 5C3Z-6608-B
$948.38 MSRP: $1338.10
You Save: $389.72 (30%)
ADD TO CART
Product Specifications
- Other Name: Cover; Engine Timing Cover; Engine Oil Pump; Timing Cover; Front Cover
- Replaces: 5C3Z-6608-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2007 Ford F-350 Super Duty | Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 8 Cyl 6.0 L DIESEL
View related parts
Ford F-350 Super Duty Timing Cover Part Number: 8C3Z-6019-D
$1181.25 MSRP: $1750.00
You Save: $568.75 (33%)
ADD TO CART
Product Specifications
- Other Name: Cover; Engine Timing Cover; Front Cover
- Replaces: 8C3Z-6019-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2010 Ford F-350 Super Duty | Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 8 Cyl 6.4 L DIESEL
View related parts
Ford F-350 Super Duty Timing Cover, Front Part Number: 5C3Z-6019-AA
$125.07 MSRP: $182.05
You Save: $56.98 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover - Cylinder Front; Engine Timing Cover; Front Cover
- Manufacturer Note: COVER, ASY ENG FRONT
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2010 Ford F-350 Super Duty | Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford F-350 Super Duty Front Cover Part Number: HC3Z-6019-A
$720.72 MSRP: $1144.00
You Save: $423.28 (37%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Cover - Cylinder Front; Engine Timing Cover; Engine Oil Pump; Timing Cover
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2019 Ford F-350 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.7 L DIESEL
View related parts
Ford F-350 Super Duty Front Cover Part Number: DC3Z-6019-B
$774.68 MSRP: $1147.67
You Save: $372.99 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover - Cylinder Front; Engine Timing Cover; Engine Oil Pump; Timing Cover
- Position: Front
- Replaces: BC3Z-6019-A, DC3Z-6019-A, BC3Z-6019-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2016 Ford F-350 Super Duty | King Ranch, Lariat, Platinum, XL, XLT | 8 Cyl 6.7 L DIESEL
View related parts
Ford F-350 Super Duty Timing Cover Part Number: 4C3Z-6019-C
$1055.25 MSRP: $1563.33
You Save: $508.08 (33%)
ADD TO CART
Product Specifications
- Other Name: Kit - Engine Installation Gasket; Engine Timing Cover; Engine Oil Pump; Front Cover
- Replaces: 4C3Z-6019-AA, 4C3Z-6019-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2006 Ford F-350 Super Duty | Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 8 Cyl 6.0 L DIESEL
View related parts
Ford F-350 Super Duty Timing Cover, Front Part Number: F75Z-6019-BA
$177.59 MSRP: $258.50
You Save: $80.91 (32%)
ADD TO CART
Product Specifications
- Other Name: Cover - Timing Belt; Engine Timing Cover; Front Cover
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2001 Ford F-350 Super Duty | Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford F-350 Super Duty Timing Cover, Front Part Number: AL3Z-6019-C
$130.68 MSRP: $201.67
You Save: $70.99 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover - Cylinder Front; Engine Timing Cover; Front Cover
- Position: Front
- Replaces: AL3Z-6019-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2022 Ford F-350 Super Duty | King Ranch, Lariat, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX
View related parts
Ford F-350 Super Duty Timing Cover, Front Part Number: 2L3Z-6019-BA
$119.90 MSRP: $174.53
You Save: $54.63 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover - Cylinder Front; Engine Timing Cover; Front Cover
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2007 Ford F-350 Super Duty | Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford F-350 Super Duty Front Cover Part Number: LC3Z-6019-D
$393.28 MSRP: $577.50
You Save: $184.22 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover - Cylinder Front
- Position: Front
- Replaced by: LC3Z-6019-F
- Replaces: LC3Z-6019-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2024 Ford F-350 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.7 L DIESEL
View related parts
Ford F-350 Super Duty Timing Cover, Front Part Number: LC3Z-6019-C
$282.16 MSRP: $414.33
You Save: $132.17 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover - Cylinder Front; Engine Timing Cover; Front Cover
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2024 Ford F-350 Super Duty | King Ranch, Lariat, Platinum, XL, XLT | 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
View related parts
Ford F-350 Super Duty Front Cover Part Number: LC3Z-6019-B
$393.28 MSRP: $577.50
You Save: $184.22 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover - Cylinder Front; Engine Timing Cover; Timing Cover
- Position: Front
- Replaced by: LC3Z-6019-F
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2022 Ford F-350 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.7 L DIESEL
View related parts
Ford F-350 Super Duty Timing Cover, Front Part Number: YC3Z-6019-BA
$703.13 MSRP: $1041.67
You Save: $338.54 (33%)
Product Specifications
- Other Name: Cover - Cylinder Front; Engine Timing Cover; Front Cover
- Position: Front
- Replaces: F81Z-6019-AA, F7TZ-6019-AAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2003 Ford F-350 Super Duty | King Ranch, Lariat, XL, XLT | 8 Cyl 7.3 L DIESEL

Ford F-350 Super Duty Timing Cover

OEM Timing Cover boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Timing Cover with long life and a perfect fit. Come to our website and find genuine Ford F-350 Super Duty parts. We keep a wide inventory of OEM F-350 Super Duty parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The appropriate and essential Ford F-350 Super Duty Timing Cover is well-known for its dependability as well as effectiveness since it is a crucial approach in protecting the timing system of different F-350 Super Duty models. Typically, the Timing Covers are made of stronger material like aluminum, plastic, or steel that help to protect the timing belt or chain from dirt that harms the other components of the engine. This protective feature is very helpful to preserve the performance and reliability of the Ford F-350 Super Duty because the Timing Cover can cause extensive problems to the vehicle. Through compatibility with generations of the Ford F-350 Super Duty starting from the year 1999 to the current ones, shows that exhaust fans are relevant in the automotive market. Some Timing Covers are fitted with gaskets that can boost its cover's protection, thereby making it even more durable. Over the years the Ford F-350 Super Duty has receved numerous upgrades and modifications in engines and in terms of pulling capacity, it therefore means that Timing Cover is more crucial to the smooth running of this car. Additional features include extra durability and accurate workmanship validating why the Ford F-350 Super Duty Timing Cover has less competition from the other brands in the market. Thus, the Timing Cover is neither just a shield but also a functional part that contributes the overall performance and reliability of the Ford F-350 Super Duty to remain the model's strong player in the heavy-duty pickup truck market.

Ford F-350 Super Duty Timing Cover Parts and Q&A

Timing Cover, Front
2L3Z-6019-BA
Q: How to service and repair the timing cover on Ford F-350 Super Duty?
A:
The procedure for timing cover service requires disconnecting the ground cable and uninstalling valve covers along with Radiator and Water Pump before the work can commence. The service of bi-fuel vehicles requires removal of both compuvalve and vaporizer components. Position the Power Steering Pump to the side by taking out the top bolts and the lower bolt after raising and supporting the vehicle. The service requires disconnecting the Crankshaft Position (CKP) sensor electrical connector along with draining the engine oil through the drain plug then unfastening all four front Oil Pan bolts before any vehicle position adjustment. The first step involves sealing removal as well as disconnecting electrical connections for both the crankshaft front seal and Camshaft Position (CMP) sensor. Begin by removing the (A) bolt then (B) belt idler pulley before taking out the rest of the bolts. Sealing surfaces require a plastic scraping tool for cleaning since metal scrapers together with abrasive tools should always be avoided. The installation requires removal of the engine front cover combined with its gasket and the front cover to cylinder block dowel. Clean both mating surfaces for inspection. Use the engine front cover gasket while adding silicone gasket and sealant onto the cylinder head to cylinder block interface and the oil pan to cylinder block interface for installation. Place the engine front cover with its gasket on the dowel before installing the bolts in a loose manner. Fasten the engine front cover fasteners by following a two-step procedure: first tighten fasteners 1 through 7 to 20 - 30 Nm (15 - 22 ft. lbs.) and continue by tightening fasteners 6 through 15 to 40 - 55 Nm (30 - 41 ft. lbs.). Connect the CMP electrical wiring before putting a new crankshaft front seal. Rise the vehicle using proper lifting equipment before installing the bolts loosely. Subsequent bolt tightening includes an initial torque until it reaches 20 Nm followed by an additional rotation of 60 degrees. The Crankshaft Position Sensor electrical connector must be connected following which the power steering pump needs installation except for the exclusion of the front lower hole. Finally all bolts must be installed. The technician should replace the drain plug followed by vehicle lowering and installation of valve covers along with the water pump and compuvalve and vaporizer units for bi-fuel vehicles. The replacement process ends with filling the engine with clean engine oil followed by reinstallation of the battery ground cable.