How to remove and replace the rear Brake Rotor on Ford Fusion?

The first step toward brake disc change is to remove the wheel together with its tire. Position the parking brake lever in a backward direction to free up the brake caliper cable which can then be detached from its attachment point alongside the removal of the retaining clip from the cable conduit. Linked connections from the brake caliper should be removed before moving forward. Danger exists when allowing the brake caliper to dangle from the brake hose because this situation might result in brake damage. Set aside the brake caliper assembly with brake caliper anchor plate and brake pads by supporting it with mechanic's wire after removing its two anchor plate bolts. You should take out the two brake disc screws followed by the brake disc. The brake disc-to-hub mounting surface should be checked for rust and foreign material before installing with anti-seize lubricant applied. Stage in the new brake disc before tightening both screws to 20 Nm (15 lb-ft). After verifying there is no twist in the brake caliper hose position the brake caliper along with brake pads and brake caliper anchor plate assembly while tightening the two brake caliper anchor plate bolts to 70 Nm (52 lb-ft). The installation process requires you to reconnect the parking cable to the caliper followed by the lever adjustment before linking it to the parking brake lever. Also reinstall the cable conduit retaining clip. Put on the wheel together with the tire next, complete parking brake cycling to test normal functioning, and execute multiple brake operations to check proper brake performance.

How to service and repair the front Brake Rotor on Ford Fusion?

Placement of the vehicle on a hoist with transmission in neutral position is essential before beginning front brake rotor/disc servicing and repair work. Keep the brake caliper suspended from the brake hose at all times to avoid breakdown of components. Take off the brake caliper anchor plate bolts before placing the brake caliper along with pads and anchor plate as one piece while using mechanic's wire to support the caliper. Reinstallation requires drivers to tighten caliper bolts at 90 Nm torque while using 66 foot pounds force as the unit. Two brake disc screws need removal after which installation requires tightening them to 20 Nm (15 ft. lbs.). Clear the hub surface where the brake disc attaches before you apply anti-seize lubricant. The brake disc needs to be installed after executing the reverse removal procedure.

OEM Ford Fusion Brake Rotor

Disc Rotor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Brake Rotors found

View related parts
Ford Fusion Rotor, Rear Part Number: 9E5Z-2C026-B
$86.63 MSRP: $133.32
You Save: $46.69 (36%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly - Brake; Disc Brake Rotor, Rear; Disc - Brake; Disc Brake Rotor; Brake Rotor
- Position: Rear
- Replaces: 9E5Z-2C026-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2012 Ford Fusion | Base, High Version - Car, Hybrid, Low Version - Car, Mid Version - Car, S, SE, SEL, Sport | 2.3L L4, 2.5L L4, 3.0L V6, 3.5L V6, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.5 L GAS
View related parts
Ford Fusion Rotor, Rear Part Number: KJ5Z-2C026-A
$94.81 MSRP: $143.00
You Save: $48.19 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly - Brake; Disc Brake Rotor, Rear; Disc - Brake; Brake Rotor
- Position: Rear
- Replaces: G2MZ-2V026-TA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2020 Ford Fusion | Energi Platinum, Energi SE, Energi Titanium, Platinum, Plug-In Hybrid, S, SE, SEL, Sport, Titanium | 1.5L L4, 1.6L L4, 2.0L L4, 2.5L L4, 2.7L V6, 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.5 L GAS, 6 Cyl 2.7 L GAS
View related parts
Ford Fusion Rotor Assembly Part Number: 6U2Z-1V125-K
$75.80 MSRP: $116.65
You Save: $40.85 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: [ROTOR ASY]
- Replaces: 6E5Z-1125-AA, 9E5Z-1125-B, 6U2Z-1V125-H, 6U2Z-1V125-E, 9E5Z-1125-C, 9E5Z-1125-A, BRRF-116, BRR-295, BRR-144, BRRF-30
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2012 Ford Fusion | Base, High Version - Car, Hybrid, Low Version - Car, Mid Version - Car, S, SE, SEL, Sport | 2.3L L4, 2.5L L4, 3.0L V6, 3.5L V6, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.5 L GAS
View related parts
Ford Fusion Rotor, Front Part Number: KS7Z-1125-C
$106.56 MSRP: $163.98
You Save: $57.42 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly - Brake; Disc Brake Rotor, Front; Brake Rotor
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2020 Ford Fusion | Energi Platinum, Energi SE, Energi Titanium, Sport | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 6 Cyl 2.7 L GAS
View related parts
Ford Fusion Rotor, Rear Part Number: KS7Z-2C026-A
$97.90 MSRP: $147.67
You Save: $49.77 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly - Brake; Disc Brake Rotor, Rear; Brake Rotor
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2020 Ford Fusion | Platinum, S, SE, SEL, Sport, Titanium | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.7 L GAS
View related parts
Ford Fusion Rotor, Front Part Number: KS7Z-1125-B
$104.20 MSRP: $157.17
You Save: $52.97 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly - Brake; Disc Brake Rotor, Front; Brake Rotor
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2020 Ford Fusion | Platinum, S, SE, SEL, Sport, Titanium | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.7 L GAS
View related parts
Ford Fusion Rotor, Front Part Number: KS7Z-1125-A
$112.71 MSRP: $170.00
You Save: $57.29 (34%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly - Brake; Disc Brake Rotor, Front; Brake Rotor
- Position: Front
- Replaces: BRRF-307, BRRF-330, BRRF-117, BRRF-328, DG9Z-1125-C, DG9Z-1125-G, DG9Z-1125-GA, DG9Z-1125-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2020 Ford Fusion | Hev Taxi Version, Hybrid, Performance, Platinum, Platinum Hybrid, Plug-In Hybrid, Police, S, S Hybrid, SE, SE Hybrid, SEL, SEL Hybrid, Series 10, Series 15, Series 20, Series 25, Series 40, Series 5, Series 50, Series 55, Sport, Titanium, Titanium Hybrid | 1.5L L4, 1.6L L4, 2.0L L4, 2.5L L4, 2.7L V6, 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 2.7 L GAS
View related parts
Ford Fusion Rotor, Front Part Number: K2GZ-1125-B
$103.49 MSRP: $156.10
You Save: $52.61 (34%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly - Brake; Disc Brake Rotor, Front; Disc - Brake; Brake Rotor
- Manufacturer Note: RH/LH
- Position: Front
- Replaces: BRRF-316, BRRF-319, BRRF-250, F2GZ-1125-D, F2GZ-1125-E, G3GZ-1125-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2020 Ford Fusion | Hev Taxi Version, Hybrid, Performance, Platinum, Plug-In Hybrid, Police, S, SE, SEL, Series 10, Series 15, Series 20, Series 25, Series 40, Series 5, Series 50, Series 55, Sport, Titanium | 1.5L L4, 2.0L L4, 2.5L L4, 2.7L V6, 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.7 L GAS
View related parts
Ford Fusion Rotor, Rear Part Number: KS7Z-2C026-B
$90.15 MSRP: $133.32
You Save: $43.17 (33%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly - Brake; Disc Brake Rotor, Rear; Brake Rotor
- Position: Rear
- Replaces: G2MZ-2V026-MA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2020 Ford Fusion | Energi Platinum, Energi SE, Energi Titanium, Hev Taxi Version, Hybrid, Performance, Platinum, Platinum Hybrid, Plug-In Hybrid, Police, S, S Hybrid, SE, SE Hybrid, SEL, SEL Hybrid, Series 10, Series 15, Series 20, Series 25, Series 40, Series 5, Series 50, Series 55, Sport, Titanium, Titanium Hybrid | 1.5L L4, 1.6L L4, 2.0L L4, 2.5L L4, 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 2.7 L GAS

Ford Fusion Brake Rotor

OEM Brake Rotor boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Brake Rotor with long life and a perfect fit. Come to our website and find genuine Ford Fusion parts. We keep a wide inventory of OEM Fusion parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Brake Rotor of the Ford Fusion changes the wheel movement into heat when the caliper presses the pads against its surfaces to stop the car. Many modern cars place the Brake Rotor design on the front and often rear of a vehicle, so it is cooler than a drum setup, as the dissipation of heat is aided by the airflow around the friction faces. A vented design with internal fins will work even better. The regularized space amid the pad and the rotor allows for self-adjustment, thus providing the user with effective pedal pressure and reducing the risk of pull on adds or limits during severe brake applications. The Fusion Brake Rotor attaches to the wheel hub via the studs, rotating with the wheel until the pad clamps under hydraulic pressure. The Brake Rotor's exposed parts allow checks for wear, scarring, or rust quickly. This is faster than enclosed drums that must be removed for checks. It is common for them to be made of a single solid piece of gray iron that aids the Ford sedan in predictable stopping performance. Every Ford Fusion Brake Rotor has proper thickness with an even surface that supports steady braking and safer driving in a Ford Fusion.

Ford Fusion Brake Rotor Parts and Q&A

Rotor, Rear
9E5Z-2C026-B
Q: How to remove and replace the rear Brake Rotor on Ford Fusion?
A:
The first step toward brake disc change is to remove the wheel together with its tire. Position the parking brake lever in a backward direction to free up the Brake Caliper cable which can then be detached from its attachment point alongside the removal of the retaining clip from the cable conduit. Linked connections from the brake caliper should be removed before moving forward. Danger exists when allowing the brake caliper to dangle from the brake hose because this situation might result in brake damage. Set aside the brake caliper assembly with brake caliper anchor plate and Brake Pads by supporting it with mechanic's wire after removing its two anchor plate bolts. You should take out the two brake disc screws followed by the brake disc. The brake disc-to-hub mounting surface should be checked for rust and foreign material before installing with anti-seize lubricant applied. Stage in the new brake disc before tightening both screws to 20 Nm (15 lb-ft). After verifying there is no twist in the brake caliper hose position the brake caliper along with brake pads and brake caliper anchor plate assembly while tightening the two brake caliper anchor plate bolts to 70 Nm (52 lb-ft). The installation process requires you to reconnect the parking cable to the caliper followed by the lever adjustment before linking it to the parking brake lever. Also reinstall the cable conduit retaining clip. Put on the wheel together with the tire next, complete parking brake cycling to test normal functioning, and execute multiple brake operations to check proper brake performance.
Rotor, Front
6U2Z-1V125-H
Q: How to service and repair the front Brake Rotor on Ford Fusion?
A:
Placement of the vehicle on a hoist with transmission in neutral position is essential before beginning front brake rotor/disc servicing and repair work. Keep the Brake Caliper suspended from the brake hose at all times to avoid breakdown of components. Take off the brake caliper anchor plate bolts before placing the brake caliper along with pads and anchor plate as one piece while using mechanic's wire to support the caliper. Reinstallation requires drivers to tighten caliper bolts at 90 Nm torque while using 66 foot pounds force as the unit. Two brake disc screws need removal after which installation requires tightening them to 20 Nm (15 ft. lbs.). Clear the hub surface where the brake disc attaches before you apply anti-seize lubricant. The brake disc needs to be installed after executing the reverse removal procedure.