How to remove and replace the engine mount on Ford Fusion?

Starting the task to replace or remove the engine mount requires positioning the vehicle on a hoist with neutral gear selected. Start by taking off the engine coolant degas bottle followed by attaching the engine support bar at the front and rear engine lifting eyes. The procedure for installment and removal requires you to detach both the bolt and radio frequency interference capacitor then tighten the bolt to 10 Nm (89 lb-in) before reinstalling. The engine mount bracket bolt requires tightening to 115 Nm (85 lb-ft) when installing the part. Lift the engine using the engine support bar to 25 mm (0.98 in) then take out the two engine mount bracket nuts before torquing them to 103 Nm (76 lb-ft). Next remove the engine mount securing nut and bolts and follow the installation by tightening them to 55 Nm (41 lb-ft). You should lower the engine by 25 mm (0.98 in) before you take out the engine mount bracket to avoid A/C tube contact with the bracket. Reverse the process of removal for reinstallation of the components.

OEM Ford Fusion Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

50 Engine Mounts found

View related parts
Ford Fusion Front Mount Part Number: 6E5Z-6038-DF
$111.64 MSRP: $162.50
You Save: $50.86 (32%)
ADD TO CART
Product Specifications
- Other Name: Bracket; Engine Mount, Front; Engine Mount Bracket; Motor Mount; Mount
- Position: Front
- Replaces: 6E5Z-6038-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2009 Ford Fusion | SE, SEL | 6 Cyl 3.0 L GAS
View related parts
Ford Fusion Front Mount Part Number: 9E5Z-6038-F
$68.91 MSRP: $100.30
You Save: $31.39 (32%)
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Front Support; Engine Mount; Engine Mount Bracket; Motor Mount; Mount
- Replaces: 6E5Z-6038-CA, 6E5Z-6061-BA, 6E5Z-6038-CK
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2012 Ford Fusion | S, SE, SEL | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX
View related parts
Ford Fusion Transmission Mount Part Number: BE5Z-6038-C
$115.65 MSRP: $168.33
You Save: $52.68 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly; Automatic Transmission Mount; Transfer Case Mount
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2012 Ford Fusion | Hybrid | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Ford Fusion Front Mount, Passenger Side Part Number: 6E5Z-6038-CK
$68.91 MSRP: $100.30
You Save: $31.39 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly; Engine Mount, Front; Engine Mount Bracket; Motor Mount; Mount
- Manufacturer Note: Requires Multiple Replacment Parts
- Position: Front Passenger Side
- Replaced by: 9E5Z-6038-F
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2009 Ford Fusion | S, SE, SEL | 4 Cyl 2.3 L GAS
View related parts
Ford Fusion Mount Bracket Part Number: 9E5Z-6061-C
$50.88 MSRP: $72.78
You Save: $21.90 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Support; Engine Mount Bracket; Motor Mount
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2012 Ford Fusion | S, SE, SEL | 4 Cyl 2.5 L GAS
View related parts
Ford Fusion Transmission Mount, Upper Part Number: 9E5Z-6038-G
$83.50 MSRP: $121.55
You Save: $38.05 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly; Automatic Transmission Mount, Upper; Transfer Case Mount
- Position: Upper
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2012 Ford Fusion | S, SE, SEL | 4 Cyl 2.5 L GAS
View related parts
Ford Fusion Transmission Mount Part Number: 9E5Z-6038-A
$80.12 MSRP: $116.62
You Save: $36.50 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly; Automatic Transmission Mount; Manual Transmission Mount; Transfer Case Mount
- Replaces: 6E5Z-6038-CB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2012 Ford Fusion | S, SE, SEL | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
View related parts
Ford Fusion Front Mount Part Number: DG9Z-6038-J
$103.28 MSRP: $150.33
You Save: $47.05 (32%)
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Front Support; Engine Mount, Front; Automatic Transmission Mount; Engine Mount Bracket; Motor Mount; Mount
- Position: Front
- Replaces: DG9Z-6038-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2016 Ford Fusion | SE, Titanium | 4 Cyl 2.0 L GAS
View related parts
Ford Fusion Front Mount Part Number: BG9Z-6038-A
$74.75 MSRP: $108.80
You Save: $34.05 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Front Support; Engine Mount, Front; Engine Mount Bracket; Motor Mount; Mount
- Position: Front
- Replaces: DS7Z-6038-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2020 Ford Fusion | SE, SEL | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS
View related parts
Ford Fusion Transmission Mount, Driver Side Part Number: 6H6Z-6038-BA
$80.12 MSRP: $116.62
You Save: $36.50 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly; Automatic Transmission Mount; Transfer Case Mount
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2009 Ford Fusion | SE, SEL | 6 Cyl 3.0 L GAS
View related parts
Ford Fusion Torque Strut, Lower Part Number: 9E5Z-6068-B
$42.63 MSRP: $62.05
You Save: $19.42 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Housing; Engine Torque Strut, Lower; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Strut
- Position: Lower
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2012 Ford Fusion | S, SE, SEL | 4 Cyl 2.5 L GAS
View related parts
Ford Fusion Trans Mount Bracket Damper, Upper Part Number: DG9Z-6F028-D
$40.18 MSRP: $58.48
You Save: $18.30 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Damper Assembly; Automatic Transmission Mount Insulator; Engine Mount Isolator, Upper; Transfer Case Mount; Motor Mount; Damper; Transmission Mount
- Position: Upper
- Replaces: DG9Z-6F028-C, DG9Z-6F028-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2014-2020 Ford Fusion | Platinum, S, SE, SEL, Titanium | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS
View related parts
Ford Fusion Damper, Lower Part Number: 7H6Z-6F028-A
$24.31 MSRP: $35.38
You Save: $11.07 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Damper Assembly; Engine Mount Isolator, Lower; Motor Mount
- Position: Lower
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2014-2015 Ford Fusion | S, SE, Titanium | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Ford Fusion Transmission Mount Part Number: GD9Z-6068-B
$104.79 MSRP: $152.53
You Save: $47.74 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Housing; Engine Torque Strut; Torque Strut
- Replaces: DS7Z-6068-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2014 Ford Fusion | SE | 4 Cyl 1.6 L GAS
View related parts
Ford Fusion Support Bracket Part Number: DG9Z-6E042-B
$84.51 MSRP: $123.02
You Save: $38.51 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket; Engine Mount Support Bracket; Engine Mount Bracket; Motor Mount
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2020 Ford Fusion | Energi Platinum, Energi SE, Energi Titanium, Platinum Hybrid, S Hybrid, SE Hybrid, SEL Hybrid, Titanium Hybrid | 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Ford Fusion Front Mount Part Number: HP5Z-6038-B
$193.96 MSRP: $282.33
You Save: $88.37 (32%)
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Front Support; Engine Mount, Front; Engine Mount Bracket; Motor Mount; Mount
- Position: Front
- Replaces: HP5Z-6038-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2019 Ford Fusion | Sport | 6 Cyl 2.7 L GAS
View related parts
Ford Fusion Support Bracket Part Number: DP5Z-6F055-A
$30.35 MSRP: $44.18
You Save: $13.83 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket; Engine Torque Strut; Support Rod; Mount; Transfer Case; Transmission; Motor; Transmission Mount Bracket; Torque Arm Bracket; Torque Strut Support Bracket; Torque Strut Bracket; Upper Arm Bracket
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2019 Ford Fusion | Sport | 6 Cyl 2.7 L GAS
View related parts
Ford Fusion Front Mount Part Number: HG9Z-6038-A
$153.43 MSRP: $223.33
You Save: $69.90 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Front Support; Engine Mount, Front; Engine Mount Bracket; Motor Mount; Mount
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2020 Ford Fusion | Platinum, SE, SEL, Titanium | 4 Cyl 2.0 L GAS
View related parts
Ford Fusion Support Bracket Part Number: JG9Z-6E042-C
$67.13 MSRP: $97.72
You Save: $30.59 (32%)
ADD TO CART
Product Specifications
- Other Name: Bracket; Engine Mount Support Bracket; Engine Mount Bracket; Motor Mount
- Replaces: DG9Z-6E042-C, DG9Z-6E042-A, HG9Z-6E042-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2020 Ford Fusion | Platinum, S, SE, SEL, Titanium | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS
View related parts
Ford Fusion Transmission Mount Part Number: DS7Z-6068-A
$57.88 MSRP: $88.92
You Save: $31.04 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Housing; Engine Torque Strut; Engine Mount Torque Strut; Transfer Case Mount; Motor Mount; Torque Strut
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2020 Ford Fusion | SE, SEL | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS

| Page 1 of 3 |Next >

1-20 of 50 Results

Ford Fusion Engine Mount

OEM Engine Mount boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Engine Mount with long life and a perfect fit. Come to our website and find genuine Ford Fusion parts. We keep a wide inventory of OEM Fusion parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Ford Fusion Engine Mount Parts and Q&A

Transmission Mount
9E5Z-6038-A
Q: How to remove and replace the engine mount on Ford Fusion?
A:
Starting the task to replace or remove the engine mount requires positioning the vehicle on a hoist with neutral gear selected. Start by taking off the engine coolant degas bottle followed by attaching the engine support bar at the front and rear engine lifting eyes. The procedure for installment and removal requires you to detach both the bolt and radio frequency interference capacitor then tighten the bolt to 10 Nm (89 lb-in) before reinstalling. The engine mount bracket bolt requires tightening to 115 Nm (85 lb-ft) when installing the part. Lift the engine using the engine support bar to 25 mm (0.98 in) then take out the two engine mount bracket nuts before torquing them to 103 Nm (76 lb-ft). Next remove the engine mount securing nut and bolts and follow the installation by tightening them to 55 Nm (41 lb-ft). You should lower the engine by 25 mm (0.98 in) before you take out the engine mount bracket to avoid A/C tube contact with the bracket. Reverse the process of removal for reinstallation of the components.