How to Safely Handle and Install the Flywheel Ring Gear on a Ford Ranger?

A proper service and repair operation on the flywheel ring gear requires initial flywheel removal followed by even tapping of the ring gear to avoid removal issues. Place a brass drift against the heated flywheel ring gear and strike it with caution through regular usage of asbestos gloves or tongs to prevent harm. When heating the flywheel ring gear, keep it even in temperature below 278°C (500°F) and maintain constant motion of the torch to prevent localized overheating. To install the flywheel ring gear properly, insert a brass drift into its surface while maintaining the bevel facing toward the rear of the flywheel.

OEM Ford Ranger Flywheel Ring Gear

Clutch Flywheel Ring Gear

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Flywheel Ring Gear found

View related parts
Ford Ranger Ring Gear
Part Number: D4FZ-6384-A
$90.98 MSRP: $125.83
You Save: $34.85 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear - Flywheel Ring; Flywheel; Gear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1984-2008 Ford Ranger | Base, Custom, Edge, S, S Plus, Splash, Sport, STX, Tremor, XL, XL Sport, XLS, XLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L DIESEL, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

Ford Ranger Flywheel Ring Gear

Welcome to our website where you can discover high-quality, genuine Ford Ranger Flywheel Ring Gear. We offer an extensive inventory of OEM Ford Ranger Flywheel Ring Gear at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford Ranger Flywheel Ring Gear Parts Questions & Experts Answers

Ring Gear
D4FZ-6384-A
Q: How to Safely Handle and Install the Flywheel Ring Gear on a Ford Ranger?
A: A proper service and repair operation on the Flywheel ring gear requires initial flywheel removal followed by even tapping of the ring gear to avoid removal issues. Place a brass drift against the heated flywheel ring gear and strike it with caution through regular usage of asbestos gloves or tongs to prevent harm. When heating the flywheel ring gear, keep it even in temperature below 278°C (500°F) and maintain constant motion of the torch to prevent localized overheating. To install the flywheel ring gear properly, insert a brass drift into its surface while maintaining the bevel facing toward the rear of the flywheel.