How to Address Issues with an Ignition Lock Cylinder on a Ford Ranger?

Begin servicing the ignition switch lock cylinder only after setting the front wheels straight ahead then removing the steering wheel assembly. Turn the cap of the ignition lock cylinder counterclockwise. A service technician must discard the faulty lock cylinder and install a new one according to the instructions provided in the lock repair package (F85Z-11582-AA). Use a 1/8-inch diameter drill bit to drill the lock cylinder retaining pin before drilling into the middle of the ignition key slot with a 3/8-inch drill bit until the ignition lock cylinder becomes free. Get rid of the damaged ignition lock cylinder as you wipe away any drill pieces stuck inside the steering column. Begin by discarding the bearing retainer and bearing together with gear while cleaning every drill shaving out of the steering column and inspecting it for possible damage. Conclude installation steps by following removal procedure then install new ignition lock cylinder before testing its functionality.

OEM Ford Ranger Ignition Lock Cylinder

Ignition Key Lock Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

15 Ignition Lock Cylinders found

View related parts
Ford Ranger Ignition Lock Cylinder
Part Number: 1L3Z-11582-A
$53.19 MSRP: $87.53
You Save: $34.34 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Lock Assembly - Steering And Ignition; Trunk Lock Cylinder; Door Lock Cylinder; Ignition Cylinder; Lock & Cylinder; Lock Cylinder; Switch Assembly; Cylinder & Keys; Warning Switch
- Replaces: 1L3Z-11582-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-2011 Ford Ranger | Edge, FX4, Splash, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
Ford Ranger Ignition Lock Cylinder
Part Number: KB3Z-11582-A
$29.38 MSRP: $45.45
You Save: $16.07 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Assembly - Ignition Switch; Ignition Cylinder
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2023 Ford Ranger | Lariat, XL, XLT | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Ignition Lock Cylinder, Black
Part Number: E3DZ-11582-A
Product Specifications
- Other Name: Lock Cylinder With Keys; Cylinder & Keys
- Replaces: E9TZ-11582-A, E3AZ-11582-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1985-1992 Ford Ranger | Base, Custom, GT, S, S Plus, Sport, STX, XL, XLS, XLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L DIESEL, 4 Cyl 2.3 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 2.9 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
Ford Ranger Ignition Lock Cylinder
Part Number: F3TZ-11582-C
Product Specifications
- Other Name: Lockset - Complete Vehicle
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1993-1994 Ford Ranger | Splash, Sport, STX, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
Ford Ranger Ignition Lock Cylinder
Part Number: F3DZ-11582-C
Product Specifications
- Other Name: Lockset - Complete Vehicle
- Replaces: F3AZ-11582-C, F1DZ-11582-C, F1AZ-11582-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1995 Ford Ranger | Splash, STX, XL, XL Sport, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
Ford Ranger Ignition Lock Cylinder
Part Number: F3DZ-11582-B
Product Specifications
- Other Name: Lockset - Complete Vehicle; Lock Cylinder
- Replaces: F1AZ-11582-B, F3AZ-11582-B, F1DZ-11582-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1995 Ford Ranger | Splash, STX, XL, XL Sport, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
Ford Ranger Ignition Lock Cylinder, Front
Part Number: F3DZ-11582-A
Product Specifications
- Other Name: Lockset - Complete Vehicle; Door Lock Cylinder, Front; Ignition Cylinder; Lock Cylinder; Cylinder & Keys; Door Lock Cylinder
- Position: Front
- Replaces: F1DZ-11582-A, F1AZ-11582-A, F3AZ-11582-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1995 Ford Ranger | Splash, STX, XL, XL Sport, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
Ford Ranger Lock Cylinder
Part Number: F57Z-1022050-A
Product Specifications
- Other Name: Lock Cylinder With Keys; Ignition Lock Cylinder; Door Lock Cylinder; Cylinder & Keys
- Manufacturer Note: F/D, G/C, IGN, w/o anti theft system, BEFORE 3/28/96
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1995-1996 Ford Ranger | Splash, STX, XL, XL Sport, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
Ford Ranger Ignition Lock Cylinder
Part Number: F3TZ-11582-E
Product Specifications
- Other Name: Lockset - Complete Vehicle
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1993-1994 Ford Ranger | Splash, Sport, STX, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
Ford Ranger Ignition Lock Cylinder
Part Number: F3TZ-11582-D
Product Specifications
- Other Name: Lockset - Complete Vehicle
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1993-1994 Ford Ranger | Splash, Sport, STX, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
Ford Ranger Ignition Lock Cylinder
Part Number: F3TZ-11582-B
Product Specifications
- Other Name: Lockset - Complete Vehicle
- Replaces: E6VZ-11582-B, E6SZ-11582-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1993-1994 Ford Ranger | Splash, Sport, STX, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
Ford Ranger Ignition Lock Cylinder, Black
Part Number: F3TZ-11582-A
Product Specifications
- Other Name: Lockset - Complete Vehicle; Ignition Cylinder; Cylinder & Keys
- Replaces: E6VZ-11582-A, E6SZ-11582-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1993-1994 Ford Ranger | Splash, Sport, STX, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
Ford Ranger Ignition Lock Cylinder
Part Number: F3DZ-11582-E
Product Specifications
- Other Name: Lockset - Complete Vehicle
- Replaces: F1AZ-11582-E, F3AZ-11582-E, F1DZ-11582-E
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1995 Ford Ranger | Splash, STX, XL, XL Sport, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
Ford Ranger Ignition Lock Cylinder
Part Number: F3DZ-11582-D
Product Specifications
- Other Name: Lockset - Complete Vehicle
- Replaces: F1DZ-11582-D, F1AZ-11582-D, F3AZ-11582-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1995 Ford Ranger | Splash, STX, XL, XL Sport, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
Ford Ranger Lock Cylinder
Part Number: F37Z-1022050-A
Product Specifications
- Other Name: Lockset - Complete Vehicle; Ignition Lock Cylinder; Door Lock Cylinder; Key Blank; Cylinder & Keys
- Manufacturer Note: F/D, G/C, IGN
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1993-1994 Ford Ranger | Splash, Sport, STX, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS

Ford Ranger Ignition Lock Cylinder

Welcome to our website where you can discover high-quality, genuine Ford Ranger Ignition Lock Cylinder. We offer an extensive inventory of OEM Ford Ranger Ignition Lock Cylinder at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford Ranger Ignition Lock Cylinder Parts Questions & Experts Answers

Ignition Lock Cylinder
1L3Z-11582-A
Q: How to Address Issues with an Ignition Lock Cylinder on a Ford Ranger?
A: Begin servicing the ignition switch lock cylinder only after setting the front wheels straight ahead then removing the Steering Wheel assembly. Turn the cap of the ignition lock cylinder counterclockwise. A service technician must discard the faulty lock cylinder and install a new one according to the instructions provided in the lock repair package (F85Z-11582-AA). Use a 1/8-inch diameter drill bit to drill the lock cylinder retaining pin before drilling into the middle of the ignition key slot with a 3/8-inch drill bit until the ignition lock cylinder becomes free. Get rid of the damaged ignition lock cylinder as you wipe away any drill pieces stuck inside the steering column. Begin by discarding the bearing retainer and bearing together with gear while cleaning every drill shaving out of the steering column and inspecting it for possible damage. Conclude installation steps by following removal procedure then install new ignition lock cylinder before testing its functionality.