C-Max | 2013-2018 | Energi SE, Energi SEL, Energi Titanium, Hybrid SE, Hybrid SEL, Hybrid Titanium | 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV)
Q: How to service the hood latch on Ford Explorer?
A: Service procedures for the hood latch start with following the order specified in the illustration and table. Start the service by detaching the hood latch release cable and following it with the release of the cable locators before pulling out the hood latch release cable assembly. First check the latch adjustment following installation and proper alignment before returning to step one of the removal procedure.
Q: How to service and repair the hood latch on Ford Ranger?
A: Start by positioning the hood latch aside and removing its bolts followed by appropriate marking of the hood latch position. Separate the hood latch by disconnecting the hood latch cable conduit end fitting from the hood latch housing as well as the hood latch cable end fitting from the hood latch release lever. The hood latch should be installed by performing the steps in reverse order along with necessary adjustments to the hood latch position.
Q: How to Ensure Proper Functionality of the Hood Latch on a Ford Mustang?
A: Service and repairs on the hood latch require the removal of 6 pin-type retainers together with the upper radiator sight shield before starting the front bumper cover. The process of reinstalling the hood latch will be easier if you note down the hood latch position first. Moving forward with the hood latch service requires the removal of 2 hood latch bolts but installation must include tightening them to 12 Nm (9 lb-ft). Remove the hood latch by first cutting the hood release cable before disconnecting this unit. Completion of the hood installation requires reversing the removal steps then adjusting the hood latch before lubricating the hood latch mechanism.