Aviator | 2020-2023 | Base, Black Label, Black Label Grand Touring, Grand Touring, Livery, Reserve | 6 Cyl 3.0 L GAS, 6 Cyl 3.0 L PLUG-IN HYBRID EV-GAS (PHEV)
Continental | 2017-2020 | 80th Anniversary Coach Door Edition, Base, Black Label, Coach Door Edition, Livery, Premiere, Reserve, Select | 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.7 L GAS
Corsair | 2020-2023 | Base, Grand Touring, Reserve | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L PLUG-IN HYBRID EV-GAS (PHEV)
MKC | 2015-2019 | Base, Black Label, Premiere, Reserve, Select | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
MKS | 2009-2015 | Base, EcoBoost | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
MKT | 2010-2019 | Base, EcoBoost, Livery, Premiere, Reserve | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
MKX | 2007-2018 | Base, Black Label, Premiere, Reserve, Select | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
MKZ | 2010-2012 | Base, Hybrid | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
Nautilus | 2019-2023 | Base, Black Label, Reserve, Select | 4 Cyl 2.0 L GAS, 6 Cyl 2.7 L GAS
Navigator | 2007-2023 | Base, Black Label, L, L Base, L Black Label, L Livery, L Luxury, L Reserve, L Select, L Ultimate, Luxury, Premiere, Reserve, Select, Ultimate | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
Q: How to service and repair the brake light switch on Lincoln Aviator?
A: The servicing and repair of the brake light switch begins with removing components according to illustration and table. To install the parts follow all steps in reverse order from uninstallation procedures.
Q: How to service the brake light switch on Lincoln LS?
A: Service of the brake light switch starts with disconnecting the electrical connector while removing the stoplamp switch. Both installation and new adjustment call for installation of a new stoplamp switch. The service process starts by rotating the knob to its stop position counterclockwise for unlocking the switch. After starting the engine you must completely depress the brake pedal before putting in the stoplamp switch followed by a slow release of the brake pedal. Follow all steps by reattaching the stoplamp switch electrical connector.
Q: How to service the brake light switch on Lincoln Navigator?
A: The service procedure for brake light switch begins with disconnecting the electrical stoplamp switch connector. The stoplamp switch becomes unremoveable when the switch plunger is not depressed yet; applying a slight force of between 1-4 N (1-3 lb) on the brake pedal completes the plunger depression. A slight rearward force on the brake pedal will enable you to extract the stoplamp switch while rotating it 45 degrees clockwise. Installation of the brake pedal assembly requires keeping it untouched to prevent damage to the stoplamp switch. Install the stoplamp switch by not moving the brake pedal assembly then rotate it 45 degrees counterclockwise before connecting the stoplamp switch electrical connector.