Other Name: Switch Assembly - Power Seat Adjustment; Power Seat Switch; Switch Assembly - Power Seat Adjust
Position: Passenger Side
Replaces: SW-7754, HP5Z-14A701-AC
Fits the following Lincoln Models:
MKZ | 2017-2020 | Base, Black Label, Black Label Hybrid, Hybrid, Premiere, Premiere Hybrid, Reserve, Reserve Hybrid, Reserve I, Reserve I Hybrid, Reserve II, Reserve II Hybrid, Select, Select Hybrid | 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS
Navigator | 2007-2017 | Base, L, L Luxury, L Reserve, L Select, L Ultimate, Luxury, Reserve, Select, Ultimate | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
Other Name: Power Seat Switch, Rear Right; Switch; Power Seat Switch
Position: Passenger Side
Fits the following Lincoln Models:
Navigator | 2007-2017 | Base, L, L Luxury, L Reserve, L Select, L Ultimate, Luxury, Reserve, Select, Ultimate | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
Q: How to service and repair the power seat switch on Lincoln Town Car?
A: The first step for power seat switch servicing requires battery ground cable removal followed by a one-minute waiting period. Accomplish access to the seat control switch through removing the front door trim panel. Disconnection of both electrical connectors with clip release is necessary to uninstall the seat control switch. The installation process requires execution of the opposite method for removel.
Q: How to service and repair the power seat switch on Lincoln Continental?
A: Disconnecting the power seat switch begins by removing the battery ground cable and waiting for one minute before servicing. Begin by removing the front door trim panel and moving onto the seat regulator control switch that needs its clips to be released and its electrical connectors to be disconnected. Finish the installation process by performing the reverse of removal steps after taking out the seat regulator control switch.
Q: How to service the third row power seat switch on Lincoln Navigator?
A: The service process for the third row power seat switch begins by partially detaching the RH quarter trim panel for access purposes. The service starts by unfastening the retaining nuts situated on the power seat switch housing from its back side. The first step requires disconnecting the electrical connectors from the power seat switch before releasing its four locking tabs to remove the switch. Follow the opposite sequence of actions from removal to install the components.