How to Ensure Safety and Properly Service the Fuel Injector on Lincoln Town Car?

You should avoid both smoking and open flames when servicing the fuel rail because its components contain flammable mixtures. A relief of fuel system pressure should occur before disconnecting components because fuel could otherwise spray accidentally. Set the vehicle on a hoist while in neutral and remove its battery ground cable. The service starts with disconnecting the fuel tube spring lock coupling from the fuel rail before removing the throttle body and exhaust gas recirculation system module to exhaust manifold tube. The mechanic should move to the side the brake booster vacuum line and the evaporative emission (EVAP) canister purge valve tube in addition to the positive crankcase ventilation (PCV) pipe and the intake manifold vacuum line which are near the throttle body spacer. To access the crash bracket device professionals should detach the wire harness retainer before taking out the bolt screws. Before proceeding disconnect both the wire harness retainer from the LH front fuel rail stud bolt and the eight fuel injector electrical connectors as well as the ground connector from the RH rear fuel rail stud bolt. The service technician needs to disconnect all vacuum and electrical connectors from the fuel rail pressure and temperature sensor together with the EGR system module. Start by removing the two bolts which attach the intake manifold shield along with the shield itself before finishing with the four bolt removal from the fuel rail. The assembly comprising fuel rail and injectors should be extracted from the system while using special fuel-resistant O-ring seals instead of standard ones because standard O-rings cause leaks. Before doing the installation push out the old O-ring seals and apply engine oil to the newly installed O-ring seals followed by the backward process of removal. The technician must tighten the crash bracket bolts to 25 Nm (18 lb-ft) and the intake manifold shield bolts to 12 Nm (9 lb-ft) and the fuel rail stud bolts to 10 Nm (89 lb-in).

What precautions should be taken when servicing the fuel injector to prevent personal injury on Lincoln Navigator?

It is essential to keep all fuel-related components away from lighted tobacco or open flames since they contain highly flammable mixtures that could result in personal injuries while servicing the fuel injector. Maintaining engine off pressure inside the fuel system requires proper fuel system pressure release before any fuel line or component disconnection to prevent injuries. Start by completing the removal of the fuel injection supply manifold followed by extracting the fuel injectors from it. Examine both O-ring seals on injectors then change them with new components according to need. The installation requires following the reverse steps of removal while using clean Super Premium SAE5W-30 Motor Oil XO-5W30-QSP or equivalent oil approved by Ford WSS-M2C153-G specification to lubricate new O-ring seals.

OEM Lincoln Fuel Injector

Gas Injector

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

36 Fuel Injectors found

View related parts
Lincoln Injector Part Number: 3W4Z-9F593-AA
$46.22 MSRP: $81.09
You Save: $34.87 (43%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Injector Assembly; Fuel Injector
- Manufacturer Note: For First Year Warranty, Service Complete Assembly
Fits the following Lincoln Models:
- LS | 2003-2005 | Appearance, Base, LSE, Luxury, Premium | 6 Cyl 3.0 L GAS
View related parts
Lincoln Injector Part Number: AA5Z-9F593-D
$163.54 MSRP: $269.09
You Save: $105.55 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Injector Assembly; GDI Fuel Injector; Fuel Injector
- Replaces: AA5Z-9F593-C, CM-5163
Fits the following Lincoln Models:
- MKS | 2010-2011 | EcoBoost | 6 Cyl 3.5 L GAS
- MKT | 2010-2011 | EcoBoost | 6 Cyl 3.5 L GAS
View related parts
Lincoln Injector Part Number: EJ7Z-9F593-C
$57.57 MSRP: $94.73
You Save: $37.16 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Injector Assembly; GDI Fuel Injector; Fuel Injector
- Replaces: CM-5232, CM-5251, EJ7Z-9F593-B, EJ7Z-9F593-A
Fits the following Lincoln Models:
- MKC | 2015-2019 | Base, Black Label, Reserve, Select | 4 Cyl 2.3 L GAS
View related parts
Lincoln Injector Part Number: FT4Z-9F593-A
$113.82 MSRP: $187.27
You Save: $73.45 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Injector Assembly; Fuel Injector
Fits the following Lincoln Models:
- Continental | 2017-2020 | 80th Anniversary Coach Door Edition, Black Label, Coach Door Edition, Reserve, Select | 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
- MKX | 2016-2018 | Black Label, Premiere, Reserve, Select | 6 Cyl 2.7 L GAS
View related parts
Lincoln Injector Part Number: FOTZ-9F593-D
$146.97 MSRP: $241.82
You Save: $94.85 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Injector Assembly; Fuel Injector
- Replaces: CM-5041, FOTZ-9F593-DA, FOTZ-9F593-C
Fits the following Lincoln Models:
- Navigator | 1998-2002 | Base | 8 Cyl 5.4 L GAS
- Town Car | 1991-1994 | Base, Cartier, Cypress, Executive, Jack Nicklaus, Signature, Touring Edition, Tournament Edition | 8 Cyl 4.6 L GAS
View related parts
Lincoln Injector Part Number: 9E5Z-9F593-A
$47.17 MSRP: $74.91
You Save: $27.74 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Injector Assembly; Gasoline Injector; Fuel Injector
Fits the following Lincoln Models:
- Corsair | 2021-2023 | Grand Touring | 4 Cyl 2.5 L PLUG-IN HYBRID EV-GAS (PHEV)
- MKZ | 2011-2012 | Hybrid | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Lincoln Injector Part Number: FB5Z-9F593-C
$74.26 MSRP: $122.18
You Save: $47.92 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Injector Assembly; Fuel Injector
- Replaces: CM-5252, FB5Z-9F593-A, FB5Z-9F593-B, CM-5241
Fits the following Lincoln Models:
- MKC | 2017-2019 | Base, Black Label, Premiere, Reserve, Select | 4 Cyl 2.0 L GAS
View related parts
Lincoln Injector Part Number: XR3Z-9F593-CB
$59.68 MSRP: $98.20
You Save: $38.52 (40%)
ADD TO CART
Product Specifications
- Other Name: Injector Assembly; Gasoline Injector; Fuel Injector
Fits the following Lincoln Models:
- Blackwood | 2002 | Base | 8 Cyl 5.4 L GAS
- Continental | 1999-2002 | Base | 8 Cyl 4.6 L GAS
- Navigator | 2003-2004 | Base | 8 Cyl 5.4 L GAS
View More
View related parts
Lincoln Injector Part Number: 4L8Z-9F593-B
$63.25 MSRP: $106.18
You Save: $42.93 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Kit - Fuel Injection; Fuel Injector
- Replaces: 2C5Z-9F593-AA, 4L8Z-9F593-AA
Fits the following Lincoln Models:
- Aviator | 2003-2005 | Base | 8 Cyl 4.6 L GAS
View related parts
Lincoln Injector Part Number: 6E5Z-9F593-AA
$54.54 MSRP: $86.60
You Save: $32.06 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Injector Assembly; Gasoline Injector; Fuel Injector
Fits the following Lincoln Models:
- Zephyr | 2006 | Base | 6 Cyl 3.0 L GAS
View related parts
Lincoln Pressure Sensor Part Number: ML3Z-9F593-B
$123.66 MSRP: $196.36
You Save: $72.70 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Injector Assembly; Fuel Injector; Injector
Fits the following Lincoln Models:
- Navigator | 2022-2023 | Base, Black Label, L Base, L Black Label, L Livery, L Reserve, Reserve | 6 Cyl 3.5 L GAS
View related parts
Lincoln Injector Part Number: 5W7Z-9F593-AA
$45.00 MSRP: $71.45
You Save: $26.45 (38%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Injector Assembly; Gasoline Injector; Fuel Injector
Fits the following Lincoln Models:
- Town Car | 2005 | Executive, Executive L, Protection Series, Signature, Signature L, Signature Limited | 8 Cyl 4.6 L GAS
View related parts
Lincoln Injector Part Number: K2GZ-9F593-A
$72.89 MSRP: $122.36
You Save: $49.47 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Injector Assembly; Fuel Injector
Fits the following Lincoln Models:
- Corsair | 2020-2023 | Base, Reserve | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
- Nautilus | 2019-2023 | Base, Black Label, Reserve, Select | 4 Cyl 2.0 L GAS
View related parts
Lincoln Pressure Sensor Part Number: ML3Z-9F593-A
$36.27 MSRP: $56.60
You Save: $20.33 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Injector Assembly; Fuel Injector; Injector
Fits the following Lincoln Models:
- Navigator | 2022-2023 | Base, Black Label, L Base, L Black Label, L Livery, L Reserve, Reserve | 6 Cyl 3.5 L GAS
View related parts
Lincoln Injector Part Number: L1MZ-9F593-B
$42.29 MSRP: $66.00
You Save: $23.71 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Injector Assembly; Fuel Injector
- Replaces: CM-5312, L1MZ-9F593-A
Fits the following Lincoln Models:
- Aviator | 2020-2023 | Base, Black Label, Black Label Grand Touring, Grand Touring, Livery, Reserve | 6 Cyl 3.0 L GAS, 6 Cyl 3.0 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Lincoln Injector Part Number: F6VZ-9F593-AA
Product Specifications
- Other Name: Injector Assembly; Fuel Injector
- Replaces: F4SZ-9F593-A
Fits the following Lincoln Models:
- Town Car | 1995-1997 | Anniversary, Base, Cartier, Cypress, Executive, Signature, Touring Edition | 8 Cyl 4.6 L GAS
View related parts
Lincoln Injector Part Number: XW4Z-9F593-AC
Product Specifications
- Other Name: Injector Assembly; Gasoline Injector; Fuel Injector
Fits the following Lincoln Models:
- LS | 2000-2002 | Base, LSE | 6 Cyl 3.0 L GAS
View related parts
Lincoln Injector Part Number: 6W4Z-9F593-AA
Product Specifications
- Other Name: Injector Assembly; Fuel Injector
- Replaces: 3W4Z-9F593-AB
Fits the following Lincoln Models:
- LS | 2003-2006 | Base, LSE, Sport, Ultimate | 8 Cyl 3.9 L GAS
View related parts
Lincoln Injector Part Number: F55Y-9F593-A
Product Specifications
- Other Name: Injector Assembly; Fuel Injector
Fits the following Lincoln Models:
- Continental | 1995-1998 | Anniversary, Base, Diamond Anniversary, Signature, Spinnaker Edition | 8 Cyl 4.6 L GAS
- Mark VIII | 1997 | Base, LSC | 8 Cyl 4.6 L GAS
View related parts
Lincoln Injector Part Number: XW7Z-9F593-AB
Product Specifications
- Other Name: Injector Assembly; Fuel Injector
- Manufacturer Note: Injector asy. (Fuel) #XW7E 9F593-A5B
- Replaces: F81Z-9F593-AA
Fits the following Lincoln Models:
- Town Car | 1998-2000 | Base, Cartier, Executive, Signature | 8 Cyl 4.6 L GAS

| Page 1 of 2 |Next >

1-20 of 36 Results

Lincoln Fuel Injector

OEM Fuel Injector boasts unmatched quality. Each part goes through full quality checks. They adhere to Lincoln's official factory standards. These steps remove flaws and inconsistencies. So you can get Fuel Injector with long life and a perfect fit. Come to our website and find genuine Lincoln parts. We keep a wide inventory of OEM parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Lincoln Fuel Injector Parts and Q&A

Injector
6W7Z-9F593-AA
Q: How to Ensure Safety and Properly Service the Fuel Injector on Lincoln Town Car?
A:
You should avoid both smoking and open flames when servicing the fuel rail because its components contain flammable mixtures. A relief of fuel system pressure should occur before disconnecting components because fuel could otherwise spray accidentally. Set the vehicle on a hoist while in neutral and remove its battery ground cable. The service starts with disconnecting the fuel tube spring lock coupling from the fuel rail before removing the throttle body and exhaust gas recirculation system module to exhaust manifold tube. The mechanic should move to the side the brake booster vacuum line and the evaporative emission (EVAP) canister purge valve tube in addition to the positive crankcase ventilation (PCV) pipe and the intake manifold vacuum line which are near the throttle body spacer. To access the crash bracket device professionals should detach the wire harness retainer before taking out the bolt screws. Before proceeding disconnect both the wire harness retainer from the LH front fuel rail stud bolt and the eight fuel injector electrical connectors as well as the ground connector from the RH rear fuel rail stud bolt. The service technician needs to disconnect all vacuum and electrical connectors from the fuel rail pressure and temperature sensor together with the EGR system module. Start by removing the two bolts which attach the intake manifold shield along with the shield itself before finishing with the four bolt removal from the fuel rail. The assembly comprising fuel rail and injectors should be extracted from the system while using special fuel-resistant O-ring seals instead of standard ones because standard O-rings cause leaks. Before doing the installation push out the old O-ring seals and apply engine oil to the newly installed O-ring seals followed by the backward process of removal. The technician must tighten the crash bracket bolts to 25 Nm (18 lb-ft) and the intake manifold shield bolts to 12 Nm (9 lb-ft) and the fuel rail stud bolts to 10 Nm (89 lb-in).
Injector
FOTZ-9F593-D
Q: What precautions should be taken when servicing the fuel injector to prevent personal injury on Lincoln Navigator?
A:
It is essential to keep all fuel-related components away from lighted tobacco or open flames since they contain highly flammable mixtures that could result in personal injuries while servicing the fuel injector. Maintaining engine off pressure inside the fuel system requires proper fuel system pressure release before any fuel line or component disconnection to prevent injuries. Start by completing the removal of the fuel injection supply manifold followed by extracting the fuel injectors from it. Examine both O-ring seals on injectors then change them with new components according to need. The installation requires following the reverse steps of removal while using clean Super Premium SAE5W-30 Motor Oil XO-5W30-QSP or equivalent oil approved by Ford WSS-M2C153-G specification to lubricate new O-ring seals.