How to Service and Repair the Front Sway Bars Without Damaging the Radiator on Lincoln LS?

The repair procedure should include preventing damage to the radiator by keeping the Sway Bars and brackets away from it. The hex holding feature should be used to prevent the studs from rotating when installing or removing Sway Bars link nuts. First, disconnect the engine cooling fan, followed by hoisting the vehicle in the neutral position. Remove both the front deflector shield along with the left side deflector shield. The specified sequence depicts when elimination of components must be done through reference to the provided table. I will accomplish the process by performing the removal steps in reverse order for installation.

How to service and repair the rear Sway Bars and link on Lincoln LS?

The hex holding mechanism should be used to block ball stud rotation before removing ball stud nuts for rear Sway Bars and link maintenance. Take the measurement from the center of wheel hub to the fender lip under vehicle weight to use later for upper arm-to-frame fastener installation. The vehicle must be placed on a hoist system with the gear shifted to neutral. Properly follow a specific sequence when disassembling and execute the instructions for every component exclusively. Installation of the parts should begin by following the steps in reverse order to removal. A jack should be placed under the lower arm to lift the vehicle before tightening the upper arm-to-frame fasteners if the measurement collected during disassembly matches the gap between the hub center point and fender lip.

OEM Lincoln LS Sway Bars

Stabilizer Sway Bar Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Sway Bars found

View related parts
Lincoln LS Stabilizer Bar Part Number: 3W4Z-5482-BA
$201.48 MSRP: $278.72
You Save: $77.24 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar Assembly - Roll; Sway Bar Bushing; Sway Bar; Stabilizer Bar Bushing; Bushings
- Replaces: XW4Z-5493-PF, XW4Z-5482-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2006 Lincoln LS | Base, DEW98 High Version, LSE, Sport, STD, Ultimate | 3.9L V8, 8 Cyl 3.9 L GAS
View related parts
Lincoln LS Stabilizer Bar Part Number: 3W4Z-5482-CA
$143.59 MSRP: $198.64
You Save: $55.05 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar Assembly - Roll; Sway Bar
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2005 Lincoln LS | Appearance, Base, LSE, Luxury, Premium | 6 Cyl 3.0 L GAS
View related parts
Lincoln LS Stabilizer Bar Part Number: 3W4Z-5482-AA
$90.77 MSRP: $123.52
You Save: $32.75 (27%)
ADD TO CART
Product Specifications
- Other Name: Bar Assembly - Roll; Suspension Stabilizer Bar Bushing; Sway Bar Bushing; Sway Bar; Stabilizer Bar Bushing; Bushings
- Replaces: XW4Z-5482-AA, XW4Z-5482-DA, XW4Z-5493-SS, XW4Z-5493-ST
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2006 Lincoln LS | Appearance, Base, DEW98 High Version, LSE, Luxury, Premium, Sport, STD, Ultimate | 3.0L V6, 3.9L V8, 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
View related parts
Lincoln LS Stabilizer Bar, Rear Part Number: XW4Z-5A772-BA
Product Specifications
- Other Name: Bar - Rear Stabilizer; Sway Bar
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2006 Lincoln LS | Appearance, Base, LSE, Luxury, Premium, Sport, Ultimate | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
View related parts
Lincoln LS Stabilizer Bar, Rear Part Number: XW4Z-5A772-AA
Product Specifications
- Other Name: Bar - Rear Stabilizer; Sway Bar
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2006 Lincoln LS | Appearance, Base, LSE, Luxury, Premium, Sport, Ultimate | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
View related parts
Lincoln LS Stabilizer Bar Part Number: 3W4Z-5482-EA
Product Specifications
- Other Name: Bar Assembly - Roll; Sway Bar Bushing; Sway Bar; Stabilizer Bar Bushing; Bushings
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2005 Lincoln LS | Appearance, Base, LSE, Luxury, Premium | 6 Cyl 3.0 L GAS

Lincoln LS Sway Bars

OEM Sway Bars boasts unmatched quality. Each part goes through full quality checks. They adhere to Lincoln's official factory standards. These steps remove flaws and inconsistencies. So you can get Sway Bars with long life and a perfect fit. Come to our website and find genuine Lincoln LS parts. We keep a wide inventory of OEM LS parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Lincoln LS Sway Bars Parts and Q&A

Stabilizer Bar
3W4Z-5482-BA
Q: How to Service and Repair the Front Sway Bars Without Damaging the Radiator on Lincoln LS?
A:
The repair procedure should include preventing damage to the Radiator by keeping the Sway Bars and brackets away from it. The hex holding feature should be used to prevent the studs from rotating when installing or removing Sway Bars link nuts. First, disconnect the engine cooling fan, followed by hoisting the vehicle in the neutral position. Remove both the front deflector shield along with the left side deflector shield. The specified sequence depicts when elimination of components must be done through reference to the provided table. I will accomplish the process by performing the removal steps in reverse order for installation.
Stabilizer Bar
3W4Z-5482-AA
Q: How to service and repair the rear Sway Bars and link on Lincoln LS?
A:
The hex holding mechanism should be used to block ball stud rotation before removing ball stud nuts for rear Sway Bars and link maintenance. Take the measurement from the center of Wheel Hub to the Fender lip under vehicle weight to use later for upper arm-to-frame fastener installation. The vehicle must be placed on a hoist system with the gear shifted to neutral. Properly follow a specific sequence when disassembling and execute the instructions for every component exclusively. Installation of the parts should begin by following the steps in reverse order to removal. A jack should be placed under the lower arm to lift the vehicle before tightening the upper arm-to-frame fasteners if the measurement collected during disassembly matches the gap between the hub center point and fender lip.