Other Name: Sensor Assembly; Blind Spot Detection System Warning Sensor; Sensor
Manufacturer Note: RH/LH
Replaces: HP5Z-14C689-B
Fits the following Lincoln Models:
Continental | 2017-2020 | 80th Anniversary Coach Door Edition, Base, Black Label, Coach Door Edition, Livery, Premiere, Reserve, Select | 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.7 L GAS
MKZ | 2017-2020 | Base, Black Label, Black Label Hybrid, Hybrid, Premiere, Premiere Hybrid, Reserve, Reserve Hybrid, Reserve I, Reserve I Hybrid, Reserve II, Reserve II Hybrid, Select, Select Hybrid | 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS
Other Name: Sensor Assembly; Blind Spot Detection System Warning Sensor, Rear; Radar Sensor; Blind Spot Radar; Sensor
Position: Rear
Fits the following Lincoln Models:
Aviator | 2020-2023 | Base, Black Label, Black Label Grand Touring, Grand Touring, Livery, Reserve | 6 Cyl 3.0 L GAS, 6 Cyl 3.0 L PLUG-IN HYBRID EV-GAS (PHEV)
Corsair | 2020-2023 | Base, Grand Touring, Reserve | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L PLUG-IN HYBRID EV-GAS (PHEV)
Q: How to service the Parking Assist Distance Sensor on Lincoln Navigator?
A: Service of the Parking Assist Distance Sensor starts with removing the parking aid sensor by unplugging the electrical connector and opening all release tabs. Proceeding from these steps allows removal of the parking aid sensor. You should perform the installation step by following the steps in reverse order to restore the sensor position.
Q: How to service the Parking Assist Distance Sensor on Lincoln LS?
A: The first task when servicing the Parking Assist Distance Sensor requires removal of the rear bumper cover. Service the Parking Assist Distance Sensor by removing the components according to their installation order. You must press the retaining tabs to detach the parking aid sensor. The sensor replacement process requires the reverse order of installation procedure.
Q: How to properly service and repair the Parking Assist Distance Sensor on a Lincoln Town Car?
A: A technician should remove the rear bumper cover before working on parking assist distance sensors. Start with disconnecting the electrical connection of parking aid radar sensors before unfastening radar sensors with nuts and bolts. Unplug the parking aid sensor electrical connector of ultrasonic sensors before removing the ultrasonic sensor while carefully releasing the tabs. The ultrasonic sensor requires an insulator to be installed when reinstalled because omitting its installation could produce false readings in the rear bumper fascia via harmonic vibrations. Reinstall all the sensors through a reverse process of the removal procedure.