Other Name: Switch Assembly; HVAC Blower Control and Motor Switch; A/C Heater Motor Switch; Climate Control Module; Blower Resistor; Blower Motor Switch; Blower Control Switch
Replaces: E6DZ-19986-A, YH-445
Fits the following Mercury Models:
Sable | 1986-1991 | GS, LS | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
Other Name: Switch Assembly; HVAC Blower Control and Motor Switch; A/C Heater Motor Switch; Climate Control Module; Blower Resistor; Temperature Switch; Blower Motor Switch; Switch; Blower Control Switch
Fits the following Mercury Models:
Mariner | 2005-2007 | Base, Convenience, Hybrid, Luxury, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
Montego | 2005-2007 | Luxury, Premier | 6 Cyl 3.0 L GAS
Monterey | 2004-2007 | Base, Convenience, Luxury, Premier | 6 Cyl 4.2 L GAS
Mountaineer | 2002-2010 | Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
Other Name: Switch Assembly; HVAC Blower Control Switch; Climate Control Module; Blower Motor Resistor; Fan Switch; Blower Motor Switch; Blower Control Switch
Replaces: F2DZ-19986-A
Fits the following Mercury Models:
Grand Marquis | 1995-2011 | GS, GSL, Limited Edition, LS, LSE, Ultimate Edition | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
Marauder | 2003-2004 | Base | 8 Cyl 4.6 L GAS
Mountaineer | 1997-2001 | Base | 6 Cyl 4.0 L GAS, 8 Cyl 5.0 L GAS
Sable | 1992-1999 | G, GS, LS, LS Premium, LTS | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
Q: How to Service Blower Control Switches on Mercury Cougar?
A: Service of the blower motor switch starts with removing the audio unit then the floor console and switch assembly before detaching the switch assembly and disconnecting electrical connectors. The move to detach the heater control/audio unit bezel starts with unscrewing its fasteners followed by unclipping the panel from its attachment points. First detach the electrical connectors from the heater control/audio unit bezel before removing it and cutting the vacuum lines. Uninstall the heater control panel followed by the blower motor switch from the system. The reversal of these steps should be followed for installing the components.
Q: How to Service Blower Control Switches on Mercury Mariner?
A: The process of servicing the blower motor switch starts with lowering the glove compartment. The service procedure starts with disconnecting the electrical blower motor speed control connector followed by screw removal of the two components that should be tightened to 3 Nm (27 lb-in) strength during installation. The procedure for installing the blower motor speed control involves returning to the steps used while removing it.
Q: How to Service Blower Control Switches on Mercury Grand Marquis?
A: Service of the blower motor switch starts by taking off the climate control assembly. First remove the switch knob of the blower motor through pulling motion. You should release the tabs before you can take the blower motor switch out. The installation of the new switch will follow all the reverse steps of the removal process.