My Garage
Cart
Make sure this part fits

Ford 6L2Z-19E624-A
Control Module

2000-2010 Ford 6L2Z19E624A

Customer Questions & Expert Answers (18)
Ford 6L2Z-19E624-A Control Module
Ford 6L2Z-19E624-A Control Module
  • Part Description
    Control; HVAC Blower Motor Control Module; HVAC Control Module
  • Base No.
    19E624
  • Replaces
    3L2Z-19E624-AA
  • Manufacturer
    Ford
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2010 Ford ExplorerEddie Bauer, Limited, NBX, XLS, XLS Sport, XLT, XLT Sport6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
    2007-2010 Ford Explorer Sport TracLimited, XLT6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
    2002 Ford ThunderbirdBase, Neiman Marcus8 Cyl 3.9 L GAS
    2003-2005 Lincoln AviatorBase8 Cyl 4.6 L GAS
    2000-2002 Lincoln LSBase, LSE6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
    2003-2006 Lincoln NavigatorBase, Luxury, Ultimate8 Cyl 5.4 L GAS
    2002-2010 Mercury MountaineerBase, Convenience, Luxury, Premier6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is 6L2Z-19E624-A the part I need for my vehicle? Posted by FordPartsDeal Specialist
    A:
    Select Your Vehicle model to verify if part number 6L2Z-19E624-A fits your car.
    Posted by FordPartsDeal Specialist
    Q:
    How to service the blower motor resistor for the auxiliary climate control on Ford Explorer? Posted by Customer
    A:
    The first step to service the auxiliary climate control blower motor resistor begins by folding down the rear seat. Service of the blower motor resistor for auxiliary climate control begins by opening the storage compartment door to extract the access panel from the LH rear quarter trim panel and the storage tray from the LH rear quarter panel. First disconnect the electrical connector of the door lock switch (if present) and then disconnect the blower motor resistor electrical connector. The blower motor resistor must be removed by first unscrewing the fasteners. Perform a reverse course of action for installing the component after removal completion.
    Posted by FordPartsDeal Specialist
    Q:
    How to service the auxiliary blower motor resistor on Lincoln Navigator? Posted by Customer
    A:
    Service of the auxiliary blower motor resistor starts with removal of the right-hand quarter trim panel access panel. First disconnect the electrical connector from the blower motor resistor before removing its two securing screws along with the resistor itself. The installation of the new resistor should follow the opposite order of removal.
    Posted by FordPartsDeal Specialist
    Q:
    How do you remove the auxiliary blower motor resistor for the 2005 Ford Explorer? Posted by Customer
    A:
    Remove the two screws securing the auxiliary blower motor resistor and then take out the resistor itself.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Blower Motor Resistor
    Q:
    How do you complete the installation for the 2005 Ford Explorer? Posted by Customer
    A:
    Reverse the steps taken during removal.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Blower Motor Resistor
    Q:
    What is the first step to service the blower motor resistor in the main climate control system for the 2002 Ford Explorer? Posted by Customer
    A:
    First, lower the glove compartment.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Blower Motor Resistor
    Q:
    What should be done after removing the components for the 2003 Ford Explorer? Posted by Customer
    A:
    For installation, reverse the removal procedure to complete the process.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Blower Motor Resistor
    Q:
    What should be done after the removal is complete for the 2004 Ford Explorer? Posted by Customer
    A:
    Install the new resistor by reversing the removal procedure.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Blower Motor Resistor
    Q:
    What should be done after the components are removed for the 2003 Lincoln Aviator? Posted by Customer
    A:
    Proceed to install the new blower motor resistor by reversing the removal procedure.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Blower Motor Resistor
    Q:
    What is the first step to service the blower motor resistor for the auxiliary system for the 2004 Lincoln Aviator? Posted by Customer
    A:
    Begin by removing the parts in the order indicated in the accompanying illustration and table.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Blower Motor Resistor
    Q:
    What should be done after removing the switch bezel for the 2005 Lincoln Aviator? Posted by Customer
    A:
    Take off the access panel and disconnect the electrical connector from the auxiliary blower motor resistor.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Blower Motor Resistor
    Q:
    What is the next step after disconnecting the electrical connector for the 2005 Lincoln Navigator? Posted by Customer
    A:
    Remove the screws securing the blower motor resistor.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Blower Motor Resistor
    Q:
    What is the first step to service the blower motor resistor for the front climate control for the 2003 Mercury Mountaineer? Posted by Customer
    A:
    Begin by removing the components in the specified order as indicated in the accompanying illustration and table.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Blower Motor Resistor
    Q:
    What should be done after removing the screws for the 2008 Mercury Mountaineer? Posted by Customer
    A:
    Disconnect the electrical connector from the blower motor resistor.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Blower Motor Resistor
    Q:
    How do you remove the auxiliary blower motor resistor for the 2006 Mercury Mountaineer? Posted by Customer
    A:
    Remove the two screws securing the auxiliary blower motor resistor and then take out the resistor itself.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Blower Motor Resistor
    Q:
    What should be done after the removal is complete for the 2004 Mercury Mountaineer? Posted by Customer
    A:
    Install the new blower motor resistor by reversing the removal procedure.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Blower Motor Resistor
    Q:
    What is the first step to service the blower motor resistor for the 2002 Mercury Mountaineer? Posted by Customer
    A:
    Lower the glove compartment.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Blower Motor Resistor
    Q:
    What is the first step to service the blower motor resistor for the 2007 Mercury Mountaineer? Posted by Customer
    A:
    Begin by removing the two screws securing the four wheel drive (4WD) control module.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Blower Motor Resistor
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Ford Control Module 6L2Z-19E624-A Designed for Proper Fit and Performance

The Ford part 6L2Z-19E624-A Control Module as a genuine Ford Blower Motor Resistor component delivers both authenticity and reliability. This item carries a warranty from the manufacturer which guarantees 12-month, 12,000-mile of use. The Ford 6L2Z-19E624-A Control Module is used with Ford Explorer, Thunderbird, Explorer Sport Trac vehicles and Mercury Mountaineer models and Lincoln Navigator, LS, Aviator models. The original Ford part will bear the manufacturer part number: 6L2Z-19E624-A and where it is made at Ford. It has the code: 19E624.
This component has dimensions of 8.7 x 7.8 x 8.0 inches and its weight is approximately 0.80 Pounds. The part 6L2Z19E624A is available in New condition while meeting the standards of the product rating. The Control; HVAC Blower Motor Control Module; HVAC Control Module belongs to the Direct Replacement category to guarantee it is suitable for its specific vehicle applications. This part 6L2Z-19E624-A can be known as Control Assembly, and it replaces 3L2Z-19E624-AA. The inventory reference for this item is SKU: 6L2Z-19E624-A. The Ford manufacturer issues a factory warranty for this component which ensures dependable operation and peak performance. You can find delivery and returns information on our Shipping Policy and Return Policy pages.
Original equipment manufacturer parts are of the top standards and their performance is outstanding and top notch. This is explained by the fact that they follow the official manufacturing techniques of Ford, use of premium material and meets high standards of quality. Our site is worth visiting, in case you need high-quality and affordable OEM Ford components. We promise the optimal priced Ford parts on a wide range. You can relax that all OEM products you buy from us include a manufacturer warranty and will be covered by our simple and easy-to-use return policy, so you will not worry about buying a part.