FordParts
My Garage
My Account
Cart
OEM 2008 Ford Expedition Fan Shroud
Radiator Fan Shroud- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Fan Shrouds found
2008 Ford Expedition Fan Shroud, Front Part Number: 9L3Z-8146-BA
$238.53 MSRP: $350.27You Save: $111.74 (32%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Shroud - Radiator Fan; Engine Cooling Fan Shroud, Front, Front Upper, Upper; Upper Shroud
- Position: Front
- Replaces: 7L1Z-8146-BA
- Base No.: 8146
- Item Weight: 15.90 Pounds
- Item Dimensions: 40.3 x 25.3 x 15.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L3Z-8146-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford Expedition Lower Shroud Part Number: 7L1Z-8146-A
Product Specifications- Other Name: Shroud - Radiator Fan; Engine Cooling Fan Shroud, Lower; Fan Shroud
- Position: Lower
- Item Weight: 1.80 Pounds
- Item Dimensions: 36.2 x 34.5 x 10.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L1Z-8146-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford Expedition Fan Shroud
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Expedition Fan Shroud available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Expedition Fan Shroud as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2008 Ford Expedition Fan Shroud Parts Q&A
- Q: How to service the cooling fan shroud on 2008 Ford Expedition?A: Service of the cooling fan shroud begins with parking the vehicle in neutral position on a hoist system. The first priority is disconnecting the battery ground cable while draining the engine cooling system. You must first remove the upper air deflector after uninstalling its 10 pushpin-type retainers and deflector fuselage. Unfasten the outlet pipe from the air cleaner before disconnecting the electrical cables and fastening them to 10 Nm (89 lb-in) while reinstalling the parts. CTest the wiring harness retainer and detach the upper radiator hose from the radiator along with its position retainer from the cooling fan shroud. First remove the vacuum canister by taking out the electrical connector and wiring harness position retainer. Also detach the wiring harness position retainer from the vacuum reservoir and vacuum connectors and electrical connector on the LH side of the cooling fan shroud when equipped. First disconnect the wiring harness retainer located on the RH side of the radiator before removing the 2 cooling fan shroud bolts and wiring harness retainers and tightening them to 10 Nm (89 lb-in). Start the power distribution box (PDB) securing bolts by hand to protect the radiator support while you remove the 4 bolts before reattaching them tightly to 10 Nm (89 lb-in). Unhook both the mass air flow (MAF) sensor electrical harness position retainer alongside the power steering fluid hose position retainers from their positions on the cooling shroud and radiator support. The power steering reservoir requires removal after its bolt is loose. Tighten the bolt to 11 Nm (8 lb-ft) before final installation. Users should detach the degas bottle hose from the radiator followed by releasing the lower position tab found on the cooling fan shroud. Next users should rotate the shroud upward until it locks into position at the tab. The lower radiator hose quick connect coupling requires removal from the radiator after the clip comes off and before the disconnecting step. The installation process should follow the exact steps in reverse order.