How to Service the Power Steering Hose to Steering Gear Pressure Line on 2009 Ford F-250 Super Duty?

A suitable suction device helps drain the power steering fluid reservoir during hydraulic booster to steering gear pressure line servicing. Disconnect the ABS module electrical connector when you remove the fender splash shield and position the connector to the side. The steering gear shield needs disconnection from the line fitting before the team rises it lengthwise up the lower steering column shaft. Remove the O-ring seal from the return hose-to-steering gear fitting of F-250/350 vehicles before installation and tighten the new model to a torque of 35 Nm (26 lb-ft). Pull out the return hose from its retaining strap. The pressure line-to-steering gear fitting must be disconnected before installation while applying 35 Nm (26 lb-ft) torque. During reinstallation secure the pressure line-to-jumper line fitting by tightening it to 62 Nm (46 lb-ft). Separate the hydraulic booster-to-steering gear pressure line at its two retainers before pulling out the pressure line. The installation ends by following the removal steps in reverse order while installing a new O-ring seal on the return hose-to-steering gear fitting and filling the power steering system.

OEM 2009 Ford F-250 Super Duty Power Steering Hose

Power Steering Pressure Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Power Steering Hoses found

View related parts
2009 Ford F-250 Super Duty Power Steering Return Hose
Part Number: 7C3Z-3A713-C
$84.53 MSRP: $139.09
You Save: $54.56 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; Power Steering Hose; Return Line
- Manufacturer Note: Gear To Cooler
- Base No.: 3A713A
- Item Weight: 3.20 Pounds
- Item Dimensions: 39.5 x 7.1 x 7.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7C3Z-3A713-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford F-250 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS
View related parts
2009 Ford F-250 Super Duty Power Steering Return Hose
Part Number: 7C3Z-3A713-E
$46.20 MSRP: $75.47
You Save: $29.27 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; Power Steering Hose; Return Line
- Manufacturer Note: Gear To Cooler
- Base No.: 3A713A
- Item Weight: 1.20 Pounds
- Item Dimensions: 25.2 x 12.1 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7C3Z-3A713-E
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford F-250 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 8 Cyl 6.4 L DIESEL
View related parts
2009 Ford F-250 Super Duty Power Steering Return Hose
Part Number: 7C3Z-3691-C
$61.09 MSRP: $97.00
You Save: $35.91 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly - Reservoir To Pump; Power Steering Reservoir Hose; Power Steering Hose; Reservoir Hose
- Manufacturer Note: Reservoir To Pump
- Base No.: 3691
- Item Weight: 0.70 Pounds
- Item Dimensions: 25.4 x 16.1 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7C3Z-3691-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford F-250 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 8 Cyl 6.4 L DIESEL
View related parts
2009 Ford F-250 Super Duty Power Steering Pressure Hose
Part Number: 7C3Z-3A719-G
$34.34 MSRP: $54.53
You Save: $20.19 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly; Power Steering Hose; Lower Pressure Hose
- Manufacturer Note: Booster To Gear
- Base No.: 3A719
- Item Weight: 1.20 Pounds
- Item Dimensions: 18.2 x 12.5 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7C3Z-3A719-G
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford F-250 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.4 L DIESEL
View related parts
2009 Ford F-250 Super Duty Power Steering Return Hose
Part Number: 7C3Z-3691-E
Product Specifications
- Other Name: Hose Assembly - Reservoir To Pump; Power Steering Reservoir Hose; Power Steering Hose; Reservoir Hose
- Manufacturer Note: Reservoir To Pump
- Base No.: 3691
- Item Weight: 0.60 Pounds
- Item Dimensions: 25.9 x 15.5 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7C3Z-3691-E
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford F-250 Super Duty Submodels:
- Cabela's, FX4, King Ranch, Lariat, XL, XLT | 8 Cyl 5.4 L GAS
View related parts
2009 Ford F-250 Super Duty Upper Pressure Hose
Part Number: 7C3Z-3A713-K
Product Specifications
- Other Name: Hose; Power Steering Return Hose; Power Steering Hose
- Manufacturer Note: Booster To Reservoir
- Replaces: 7C3Z-3A713-A
- Base No.: 3A713A
- Item Weight: 0.60 Pounds
- Item Dimensions: 25.4 x 16.8 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7C3Z-3A713-K
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford F-250 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS
View related parts
2009 Ford F-250 Super Duty Power Steering Return Hose
Part Number: 7C3Z-3A713-G
Product Specifications
- Other Name: Tube Assembly; Power Steering Hose; Tube
- Manufacturer Note: Gear To Cooler
- Base No.: 3A713B
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.4 x 10.9 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7C3Z-3A713-G
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford F-250 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 8 Cyl 6.4 L DIESEL
View related parts
2009 Ford F-250 Super Duty Power Steering Return Hose
Part Number: 7C3Z-3A713-J
Product Specifications
- Other Name: Tube Assembly; Power Steering Hose; Return Hose
- Manufacturer Note: Cooler to reservoir
- Base No.: 3A713C
- Item Weight: 3.20 Pounds
- Item Dimensions: 24.9 x 15.5 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7C3Z-3A713-J
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford F-250 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 8 Cyl 6.4 L DIESEL
View related parts
2009 Ford F-250 Super Duty Power Steering Return Hose
Part Number: 7C3Z-3A713-H
Product Specifications
- Other Name: Tube Assembly; Power Steering Hose; Return Hose
- Manufacturer Note: Cooler to reservoir
- Base No.: 3A713B
- Item Weight: 0.40 Pounds
- Item Dimensions: 0.8 x 0.8 x 20.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7C3Z-3A713-H
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford F-250 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS
View related parts
2009 Ford F-250 Super Duty Upper Pressure Hose
Part Number: 7C3Z-3A713-L
Product Specifications
- Other Name: Hose; Power Steering Return Hose; Power Steering Hose
- Manufacturer Note: Booster To Reservoir
- Replaces: 7C3Z-3A713-B
- Base No.: 3A713A
- Item Weight: 0.50 Pounds
- Item Dimensions: 24.4 x 15.6 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7C3Z-3A713-L
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford F-250 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 8 Cyl 6.4 L DIESEL
View related parts
2009 Ford F-250 Super Duty Power Steering Pressure Hose
Part Number: 7C3Z-3A719-J
Product Specifications
- Other Name: Hose Assembly; Power Steering Hose
- Base No.: 3A719
- Item Weight: 0.60 Pounds
- Item Dimensions: 25.4 x 15.2 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7C3Z-3A719-J
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford F-250 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 8 Cyl 6.4 L DIESEL
View related parts
2009 Ford F-250 Super Duty Power Steering Return Hose
Part Number: 7C3Z-3691-F
Product Specifications
- Other Name: Hose Assembly - Reservoir To Pump; Power Steering Reservoir Hose; Power Steering Hose; Reservoir Hose
- Manufacturer Note: Reservoir To Pump
- Base No.: 3691
- Item Weight: 0.60 Pounds
- Item Dimensions: 25.4 x 15.1 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7C3Z-3691-F
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford F-250 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS

2009 Ford F-250 Super Duty Power Steering Hose

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford F-250 Super Duty Power Steering Hose available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford F-250 Super Duty Power Steering Hose as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford F-250 Super Duty Power Steering Hose Parts Questions & Experts Answers

Q: How to Service the Power Steering Hose to Steering Gear Pressure Line on 2009 Ford F-250 Super Duty?
A: A suitable suction device helps drain the power steering fluid reservoir during hydraulic booster to steering gear pressure line servicing. Disconnect the ABS module electrical connector when you remove the fender splash shield and position the connector to the side. The steering gear shield needs disconnection from the line fitting before the team rises it lengthwise up the lower steering column shaft. Remove the O-ring seal from the return hose-to-steering gear fitting of F-250/350 vehicles before installation and tighten the new model to a torque of 35 Nm (26 lb-ft). Pull out the return hose from its retaining strap. The pressure line-to-steering gear fitting must be disconnected before installation while applying 35 Nm (26 lb-ft) torque. During reinstallation secure the pressure line-to-jumper line fitting by tightening it to 62 Nm (46 lb-ft). Separate the hydraulic booster-to-steering gear pressure line at its two retainers before pulling out the pressure line. The installation ends by following the removal steps in reverse order while installing a new O-ring seal on the return hose-to-steering gear fitting and filling the power steering system.