Other Name: Hose - Fuel Vapour; Evaporative Emissions System Lines
Fits the following Ford Models:
Expedition | 2018-2021 | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS
F-150 | 2017-2020 | King Ranch, Lariat, Limited, Platinum, Police Responder, Raptor, SSV, XL, XLT | 6 Cyl 3.5 L GAS
Q: How to Service and Repair an EGR Tube on Ford Explorer?
A: The EGR tube service requires first removing EGR pressure transducer hoses and lower EGR tube fittings. When installing the system you should perform the reverse steps that you used during removal.
Q: How to Service and Repair the EGR Tube in the Exhaust Gas Recirculation System on Ford Mustang?
A: The service and repair of Exhaust Gas Recirculation (EGR) system module tube starts by taking out the battery tray in vehicles with the 5.4L 4V engine. When installing or replacing an EGR system module tube for the 4.0L SOHC engine or 5.4L 4V engine you should tighten the connection to 39 Nm (29 lb-ft) or 42 Nm (31 lb-ft) respectively. Unplug the EGR system module tube from where it connects to the exhaust manifold fitting after which remove the tube. Users should reinstall the tube while tightening it to 39 Nm (29 lb-ft) for 4.0L SOHC engines and 42 Nm (31 lb-ft) for 5.4L 4V engines before performing the complete reversal of installation steps.
Q: How to service the EGR Tube Outlet on a 2.3L engine on Ford Ranger?
A: The first step for servicing the EGR Valve Outlet Tube on a 2.3L engine requires removal of the intake manifold. Loosen the fitting while you take out the EGR tube from the system. The installation process will follow the opposite steps of removal along with proper tightening of the EGR tube to 55 Nm (41 lb-ft).