How to Service and Repair the Rear Sway Bar Kit on Ford Focus?

Service and repair procedures on the rear sway bar kit must start with a vehicle height at curbside or slightly below then adding necessary suspension loading. The vehicle needs to be in neutral gear for placement on a hoist before the user should raise it into position. You must detach the sway bar kit from the rear lower arm before removing it by unscrewing two bolts from each side. Service work on the sway bar kit begins by removing retaining bolts from sway bar kit clamps followed by removing the clamps and the sway bar kit while extracting its bushings. Install the sway bar kit bushings properly on the bar without lubrication by placing the bushing nipple on its left side. The sway bar kit bushings should be installed first on the bar before fitting the clamps onto their respective positions while using water on the clamps to make installation easier. Begin by attaching the sway bar kit clamps to the bushings and afterward reinsert the sway bar kit using 2 bolts per side while completing the installation with attachment of the sway bar kit to the rear lower arms.

OEM Ford Focus Sway Bar Kit

Stabilizer Sway Bar Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

17 Sway Bar Kits found

View related parts
Ford Focus Stabilizer Bar, Rear Part Number: 9S4Z-5A772-B
$42.74 MSRP: $59.13
You Save: $16.39 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Rear Stabilizer; Suspension Stabilizer Bar, Rear; Sway Bar
- Position: Rear
- Replaces: YS4Z-5A772-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2011 Ford Focus | LX, S, SE, SEL, SES, Sony Limited Edition, ST, SVT, ZTS, ZTW, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Ford Focus Stabilizer Bar, Front Part Number: 3S4Z-5482-BA
$47.48 MSRP: $65.68
You Save: $18.20 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Stabilizer; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
- Replaces: YS4Z-5482-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2007 Ford Focus | LX, S, SE, SES, ST, SVT, ZTS, ZTW, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Ford Focus Stabilizer Bar, Front Part Number: CV6Z-5482-A
$112.63 MSRP: $173.33
You Save: $60.70 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar Assembly - Roll; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012-2018 Ford Focus | S, SE, SEL, Titanium | 3 Cyl 1.0 L GAS, 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS
View related parts
Ford Focus Stabilizer Bar, Rear Part Number: 8S4Z-5A772-A
$36.48 MSRP: $50.46
You Save: $13.98 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Rear Stabilizer; Suspension Stabilizer Bar, Rear; Sway Bar
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2011 Ford Focus | S, SE, SEL, SES | 4 Cyl 2.0 L GAS
View related parts
Ford Focus Stabilizer Bar Part Number: G1FZ-5A772-A
$129.39 MSRP: $188.33
You Save: $58.94 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Stabilizer; Suspension Stabilizer Bar, Rear; Sway Bar
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2016-2018 Ford Focus | RS, S, SE, SEL, ST, Titanium | 3 Cyl 1.0 L GAS, 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Ford Focus Stabilizer Bar Part Number: DV6Z-5A772-B
$93.66 MSRP: $136.33
You Save: $42.67 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Stabilizer; Suspension Stabilizer Bar, Rear; Sway Bar
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012-2018 Ford Focus | S, SE, SEL, Titanium | 3 Cyl 1.0 L GAS, 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS
View related parts
Ford Focus Stabilizer Bar Part Number: DV6Z-5A772-A
$67.90 MSRP: $98.83
You Save: $30.93 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Stabilizer; Suspension Stabilizer Bar, Rear; Sway Bar
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012-2018 Ford Focus | Electric | BATTERY EV (EV/BEV)
View related parts
Ford Focus Stabilizer Bar, Front Part Number: DV6Z-5482-A
$160.30 MSRP: $233.33
You Save: $73.03 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar Assembly - Roll; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012-2018 Ford Focus | Electric | BATTERY EV (EV/BEV)
View related parts
Ford Focus Stabilizer Bar Part Number: BV6Z-5A772-B
$68.47 MSRP: $99.67
You Save: $31.20 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Stabilizer; Suspension Stabilizer Bar, Rear; Sway Bar
- Replaces: CV6Z-5A772-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012-2013 Ford Focus | S, SE, SEL, Titanium | 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS
View related parts
Ford Focus Stabilizer Bar Part Number: BV6Z-5A772-A
$278.42 MSRP: $408.83
You Save: $130.41 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Stabilizer; Suspension Stabilizer Bar, Rear; Sway Bar
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2018 Ford Focus | ST | 4 Cyl 2.0 L GAS
View related parts
Ford Focus Stabilizer Bar, Front Part Number: CV6Z-5482-B
$120.23 MSRP: $175.00
You Save: $54.77 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar Assembly - Roll; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2018 Ford Focus | ST | 4 Cyl 2.0 L GAS
View related parts
Ford Focus Stabilizer Bar Part Number: BV6Z-5A772-C
Product Specifications
- Other Name: Bar - Stabilizer; Suspension Stabilizer Bar, Rear; Sway Bar
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2018 Ford Focus | ST | 4 Cyl 2.0 L GAS
View related parts
Ford Focus Stabilizer Bar, Front Part Number: 8S4Z-5482-D
Product Specifications
- Other Name: Bar - Stabilizer; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
- Replaces: 8S4Z-5482-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2011 Ford Focus | S, SE, SEL, SES | 4 Cyl 2.0 L GAS
View related parts
Ford Focus Stabilizer Bar, Front Part Number: 8S4Z-5482-C
Product Specifications
- Other Name: Bar - Stabilizer; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
- Replaces: 3S4Z-5482-AA, YS4Z-5482-EA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2011 Ford Focus | LX, S, SE, SEL, SES, Sony Limited Edition, ST, SVT, ZTS, ZTW, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Ford Focus Stabilizer Bar, Rear Part Number: 1S4Z-5A772-BA
Product Specifications
- Other Name: Bar - Rear Stabilizer; Suspension Stabilizer Bar, Rear; Sway Bar
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2007 Ford Focus | LX, S, SE, SES, ST, SVT, ZTS, ZTW, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Ford Focus Stabilizer Bar, Front Part Number: 1S4Z-5482-FA
Product Specifications
- Other Name: Bar - Front Stabilizer; Suspension Stabilizer Bar, Front; Sway Bar
- Manufacturer Note: Bar diameter , 22mm , Wagon
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2003 Ford Focus | SE, Sony Limited Edition, ZTS, ZTW | 4 Cyl 2.0 L GAS
View related parts
Ford Focus Stabilizer Bar Part Number: 1S4Z-5482-CA
Product Specifications
- Other Name: Bar - Stabilizer; Sway Bar
- Manufacturer Note: Bar diameter - 21mm, SVT
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004 Ford Focus | SVT | 4 Cyl 2.0 L GAS

Ford Focus Sway Bar Kit

OEM Sway Bar Kit boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Sway Bar Kit with long life and a perfect fit. Come to our website and find genuine Ford Focus parts. We keep a wide inventory of OEM Focus parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

By Readily: Sway Bar Kit in the Ford Focus cars has the responsibility of reducing body roll motions in the car during cornering and over surface irregularities. This anti roll bar joins the opposite wheels with torsion spring, and makes roll stiffness higher without changing the vertical spring rate. In this way the Sway Bar Kit, prevents torsion and makes the wheels to be upright to similar heights thus reducing the lateral tilt and improving the grip on the road. There were some types of Sway Bar Kits that have been installed throughout the years in the Ford Focus, namely the adjustable Sway Bar Kit and the active Sway Bar Kit. These advanced Sway Bar Kits can adapt the stiffness and enhance the handling features and better stability at the same time. While traditional Sway Bar Kits in Ford Focus may transfer jitters between wheels therefore giving the car a 'waddling' feel when on rough surface, the latest Generations of the Sway Bar Kit is geared towards improving ride quality and performance of Ford Focus, this is a demonstration of the enhanced Ford Focus Sway Bar Kit system.

Ford Focus Sway Bar Kit Parts and Q&A

Stabilizer Bar, Rear
1S4Z-5A772-BA
Q: How to Service and Repair the Rear Sway Bar Kit on Ford Focus?
A:
Service and repair procedures on the rear sway bar kit must start with a vehicle height at curbside or slightly below then adding necessary suspension loading. The vehicle needs to be in neutral gear for placement on a hoist before the user should raise it into position. You must detach the sway bar kit from the rear lower arm before removing it by unscrewing two bolts from each side. Service work on the sway bar kit begins by removing retaining bolts from sway bar kit clamps followed by removing the clamps and the sway bar kit while extracting its bushings. Install the sway bar kit bushings properly on the bar without lubrication by placing the bushing nipple on its left side. The sway bar kit bushings should be installed first on the bar before fitting the clamps onto their respective positions while using water on the clamps to make installation easier. Begin by attaching the sway bar kit clamps to the bushings and afterward reinsert the sway bar kit using 2 bolts per side while completing the installation with attachment of the sway bar kit to the rear lower arms.