Other Name: Door Mirror Drive Motor, Front; Mirror Motor; Adjust Motor; Motor; Adjuster
Manufacturer Note: RH/LH
Position: Front
Replaces: CU5Z-17D696-B
Fits the following Ford Models:
Escape | 2013-2023 | Platinum, Platinum Hybrid, Plug-In Hybrid, S, SE, SE Hybrid, SE Plug-In Hybrid, SE Sport Hybrid, SEL, SEL Hybrid, SEL Plug-In Hybrid, Titanium, Titanium Hybrid, Titanium Plug-In Hybrid | 3 Cyl 1.5 L GAS, 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 4 Cyl 2.5 L PLUG-IN HYBRID EV-GAS (PHEV)
Mustang Mach-E | 2021-2023 | California Route 1, First Edition, GT, Premium, Select | BATTERY EV (EV/BEV)
Other Name: Door Mirror Drive Motor, Front; Mirror Motor; Motor
Manufacturer Note: RH/LH
Position: Front
Fits the following Ford Models:
Fusion | 2006-2015 | Hybrid, S, SE, SEL, Sport, Titanium | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.5 L GAS
Other Name: Door Mirror Drive Motor, Front; Mirror Motor; Motor
Position: Front
Fits the following Ford Models:
Escape | 2008-2010 | Hybrid, Limited, Limited Hybrid, XLS, XLT | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
Focus | 2008-2011 | S, SE, SEL, SES | 4 Cyl 2.0 L GAS
Fusion | 2006-2012 | Hybrid, S, SE, SEL, Sport | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.5 L GAS
Q: How to service the power mirror actuator on Ford Explorer?
A: Start servicing the power mirror motor by taking out the glass surface from the exterior mirror. First disconnect all electrical connectors linked to the exterior mirror motor and then remove its mounting screws. Finish the installation procedure by executing the exact steps from the removal process.
Q: How to service the Mirror Actuator on Ford Mustang?
A: Service of the power mirror motor begins by removing the mirror glass from the exterior. Proceed by removing the three exterior mirror motor screws while securing them at 7 Nm (62 lb-in) when reinstalling. Take off the exterior mirror motor by first cutting the electrical connector from its connection to the motor then unfastening the unit. The completion of installation requires following the opposite procedure of removal.
Q: How to Service and Repair the Power Mirror Actuator on Ford Ranger?
A: Begin the power mirror motor service process by taking the exterior mirror glass off. Remove the three screws securing the exterior mirror motor before placing the motor unit safely to the side. All electrical connectors should be disconnected to achieve complete removal of the exterior mirror motor. The installation process requires performing the stepwise process in reverse order to installation.