Ford 6U5Z-17D696-C
Motor Assembly, Black, Front

Start the power mirror motor service by disconnecting the mirror glass from outside rear view. You need to pull out the three screws that keep the exterior rear view mirror motor in place before disconnecting its electrical connector from the motor. Reinstall the motor by performing the removal process in opposite order. A vehicle with power folding mirrors needs synchronization after installation because it applies to mirror operation when users decline the exterior switch or involve new power folding mirror setup. The process for mirror motor synchronization starts with following the Exterior Mirror Motor Synchronization - Power Folding procedures which require testing and inspection before moving to programming then relearning.

A synchronization step should be performed whenever someone manually operates power folding mirrors or positions the mirror case by hand without using the switch. A continuous operation of the power folding mirrors for 6 to 10 cycles activates power lockout for 2 minutes to protect the power fold motors before the system restores normal functionality. Put the mirror control switch into its midpoint position as the first step. Synchronization may require powershifting the mirrors in and out four times from their stored position. To operate the power folding mirrors automatically through four cycles users should push the mirror control switch to the rear position. Listening to a popping sound indicates that power folding mirror motors have successfully synchronized.

The power mirror service starts with unmounting the exterior mirror glass for the first step. You must first remove the three screws from the exterior mirror motor and then detach this element. The electrical connector should be disconnected first before performing the installation that follows the original removal process.

Service of the power mirror motor begins by removing the mirror glass from the exterior. Proceed by removing the three exterior mirror motor screws while securing them at 7 Nm (62 lb-in) when reinstalling. Take off the exterior mirror motor by first cutting the electrical connector from its connection to the motor then unfastening the unit. The completion of installation requires following the opposite procedure of removal.

Service and repair of the power mirror motor begins with extracting the exterior mirror glass. You must remove three screws holding the exterior mirror motor before gently taking out the motor piece. Disconnection of the electrical connector must happen before beginning work on the system. Worker should uninstall the new motor following the same steps used for removal. Both the Sable and Taurus follow the same service procedure although the Taurus X shares equivalent requirements.

Service of exterior mirror motor begins with mirror glass removal. The installation process begins with unscrewing the three exterior mirror motor screws followed by tightening them to 7 Nm (62 lb-in) during assembly. Detach the exterior mirror motor electrical connector before removing the motor device. The installation process requires implementing the opposite order of removal methods.

Service of power mirror motor requires first unmounting the mirror glass. You must start by unfastening the three screws holding the exterior mirror motor then separating the motor unit from the whole assembly. The electrical connectors need to be disconnected before the removal process can be completed. Follow the exact opposite procedures of removal for integration steps.

The first step for servicing the power mirror motor involves removing the mirror glass. Start by removing the three screws of the exterior mirror motor and after detaching it you must disconnect its electrical connectors. After performing the removal steps in reverse order for installation you should synchronize power folding mirrors only when the control switch remains unused for folding and unfolding them.

A procedural step for mirror motor synchronization must happen after hand folding of exterior mirrors or modifying the mirror position without using the mirror control switch. The power lockout activation requires continuous mirror folding or unfolding actions totaling 6 to 10 cycles, which will disable power fold operations for 2 minutes as protection for power fold motor systems until automatic system restart occurs. Set the mirror control switch to its central position at first step. To achieve mirror synchronization the power folding mirrors should be operated automatically four times either inward or outward. You should press the mirror control switch backwards to allow automated movement of the power folding mirrors through 4 cycles. An audible sound indicates that the power folding mirror motors have reached synchronization while they operate.

Service technicians should start the power mirror motor repair process by taking off the exterior rear view mirror glass. The three screws holding the exterior rear view mirror motor need to be taken out. Sever the electrical connector from the exterior rear view mirror motor before extracting the motor unit. The motor installation follows the same order of steps used during disassembly.

Service and repair of power mirror motors requires the first step to be the removal of exterior mirror glasses. After disconnecting the exterior mirror motor electrical connector, remove the three screws which fasten the exterior mirror motor. To detach the exterior mirror motor completely one must disconnect the electrical connector. Installation requires performing the opposite actions which were used during removal.

Simply reverse the removal procedure.

Take out the three screws securing the exterior mirror motor.

Remove the exterior rear view mirror glass.

Take out the three exterior mirror motor screws and detach the exterior mirror motor, ensuring to disconnect the electrical connectors.

Adjust the exterior mirror glass to create a gap at the top edge, then carefully pull the top edge away from the exterior mirror housing.

Reverse the removal steps.

Remove the exterior rear view mirror glass.

Reinstall the motor by reversing the removal steps.

Tighten them to 7 Nm (62 lb-in).

Take out the three screws securing the exterior rear view mirror motor and disconnect the electrical connector.

Disconnect the electrical connector from the motor.

Remove the motor itself and its electrical connectors.

Remove the motor itself.