Other Name: Bush; Suspension Stabilizer Bar Bushing, Front; Sway Bar Bushing; Bushings
Manufacturer Note: Purple
Position: Front
Replaces: DG9Z-5484-B
Fits the following Lincoln Models:
MKZ | 2013-2020 | Base, Black Label, Black Label Hybrid, Hybrid, Premiere, Premiere Hybrid, Reserve, Reserve Hybrid, Reserve I, Reserve I Hybrid, Reserve II, Reserve II Hybrid, Select, Select Hybrid | 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 6 Cyl 3.7 L GAS
Other Name: Insulator Assembly; Rear Suspension Stabilizer Bar Bushing Kit; Sway Bar Bushing.; Bushing; Bushings
Position: Rear
Fits the following Lincoln Models:
Navigator | 2007-2017 | Base, L, L Luxury, L Reserve, L Select, L Ultimate, Luxury, Reserve, Select, Ultimate | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
Other Name: Insulator Assembly; Suspension Stabilizer Bar Bushing, Rear; Sway Bar Bushing; Bushing; Bushings
Manufacturer Note: RH/LH
Position: Rear
Fits the following Lincoln Models:
MKZ | 2017-2020 | Base, Black Label, Black Label Hybrid, Hybrid, Premiere, Premiere Hybrid, Reserve, Reserve Hybrid, Reserve I, Reserve I Hybrid, Reserve II, Reserve II Hybrid, Select, Select Hybrid | 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS
Other Name: Insulator Assembly; Rear Suspension Stabilizer Bar Bushing Kit; Sway Bar Bushing.; Bushing; Bushings
Position: Rear
Fits the following Lincoln Models:
Navigator | 2007-2017 | Base, L, L Luxury, L Reserve, L Select, L Ultimate, Luxury, Reserve, Select, Ultimate | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
Q: How to service the rear sway bar bushing on Lincoln LS?
A: To service the rear sway bar bushing, ensure the vehicle is in neutral on a hoist. Lower the subframe 37 mm and support it. Remove the subframe bolts and sway bar brackets, then the bushings. Reinstall using a new part and proper torque, avoiding grease on the bushings.
Q: How to Service and Repair the Sway Bar Bushing on Lincoln Town Car?
A: In order to service the sway bar bushing, lift the vehicle, take off the sway bar bracket by removing nuts. Then, take out the sway bar bushing. To install, undo the steps of removal. The two are serviced in the same manner with the right side as a sample.