How to service and repair the axle beam on Mercury Monterey?

The vehicle requires neutral gear and hoisting to perform axle beam service and repair. Take away the rear brake discs before breaking the connections of brake lines and rear wheel speed sensor wire harness from the rear axle assembly. A suitable high-lift jack functioning as support must be utilized to protect vehicle components when removing the trackbar arm because the rear axle assembly needs to be kept stable first. Disconnect the trackbar arm from the axle by first removing its bolt and then its arm from the axle mounting bracket before installing and tightening it to 103 Nm (76 ft. lbs). Tighten the new installation of shock absorber lower bolts and nuts to 80 Nm (59 ft. lbs). Secure the new installation of nuts and parking brake cable brackets to 25 Nm (18 ft. lbs). When removing the springs the insulators from the spring may separate from the spring metal; lower the axle assembly at a controlled rate before taking off the rear springs. You should replace the trailing arm nuts and bolts before securely tightening them to 133 Nm (98 ft. lbs). To complete the process return the axle assembly in reverse order of the removal steps. Rebuilding the suspension requires substituting all fasteners with parts that match their original number or approved equivalents along with torquing these crucial elements precisely as the manufacturer specifies.

OEM Mercury Axle Beam

Rigid Axle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

53 Axle Beams found

View related parts
Mercury Engine Cradle Part Number: 3F2Z-5C145-CA
$2107.17 MSRP: $2915.07
You Save: $807.90 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Frame Assembly
- Manufacturer Note: Less front tow hooks, FROM 6/24/02
- Replaces: 1F2Z-5C145-CA, 1F2Z-5C145-DA, 3F2Z-5C145-DA
Fits the following Mercury Models:
- Monterey | 2004-2007 | Base, Convenience, Luxury, Premier | 6 Cyl 4.2 L GAS
View related parts
Mercury Engine Cradle, Front Part Number: 8E5Z-5C145-E
Product Specifications
- Other Name: Frame Assembly; Engine Cradle, Front; Crossmember
- Position: Front
- Replaced by: AE5Z-5874-B
Fits the following Mercury Models:
- Milan | 2007-2009 | Base, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Engine Cradle, Front Part Number: 6E5Z-5C145-BA
Product Specifications
- Other Name: Frame Assembly; Engine Cradle, Front; Crossmember
- Position: Front
- Replaced by: AE5Z-5874-B
Fits the following Mercury Models:
- Milan | 2006-2007 | Base, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Rear Crossmember Part Number: F5RZ-5035-B
Product Specifications
- Other Name: Cross Member Assembly; Suspension Crossmember; Crossmember
Fits the following Mercury Models:
- Cougar | 1999-2002 | Base, S, V6 | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
- Mystique | 1995-2000 | Base, GS, GS Spree, LS, LS Young America | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Mercury Transmission Support Part Number: 3W1Z-5027-AA
Product Specifications
- Other Name: Crossmember; Transmission Crossmember; Transfer Case Mount; Transmission Mount; Trans Crossmember
Fits the following Mercury Models:
- Grand Marquis | 2003-2011 | GS, GSL, Limited Edition, LS, LSE, Ultimate Edition | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
- Marauder | 2003-2004 | Base | 8 Cyl 4.6 L GAS
View related parts
Mercury Torsion Bar, Front Part Number: 6L2Z-5B112-A
Product Specifications
- Other Name: Cross Member Assembly; Frame Crossmember, Front; Crossmember Assembly; Center Crossmember
- Position: Front
Fits the following Mercury Models:
- Mountaineer | 2006-2010 | Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Mercury Crossmember Part Number: F8AZ-5019-AA
Product Specifications
- Other Name: Cross Member Assembly
Fits the following Mercury Models:
- Grand Marquis | 1997-2001 | GS, LS | 8 Cyl 4.6 L GAS
View related parts
Mercury Transmission Support Part Number: FOAZ-5027-A
Product Specifications
- Other Name: Crossmember; Transfer Case Mount; Transmission Mount; Trans Crossmember
Fits the following Mercury Models:
- Grand Marquis | 1992-2002 | GS, LS | 8 Cyl 4.6 L GAS
View related parts
Mercury Engine Cradle, Front Part Number: 8E5Z-5C145-D
Product Specifications
- Other Name: Frame Assembly; Engine Cradle, Front; Crossmember
- Position: Front
- Replaced by: AE5Z-5874-B
Fits the following Mercury Models:
- Milan | 2007-2009 | Base, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Suspension Crossmember, Rear Part Number: AE5Z-5035-A
Product Specifications
- Other Name: Cross Member Assembly; Suspension Subframe Crossmember, Rear; Crossmember
- Position: Rear
Fits the following Mercury Models:
- Milan | 2010-2011 | Base, Hybrid, Premier | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX
View related parts
Mercury Engine Cradle, Front Part Number: AE5Z-5C145-B
Product Specifications
- Other Name: Frame Assembly; Engine Cradle, Front; Crossmember
- Position: Front
Fits the following Mercury Models:
- Milan | 2010-2011 | Hybrid | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Mercury Engine Cradle, Front Part Number: 2F1Z-5C145-AA
Product Specifications
- Other Name: Frame Assembly; Engine Cradle, Front
- Manufacturer Note: FROM 09/14/2001
- Position: Front
Fits the following Mercury Models:
- Sable | 2002-2003 | GS, LS, LS Premium | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Cross Bar, Front Part Number: 3L2Z-5019-AA
Product Specifications
- Other Name: Cross Member Assembly; Suspension Subframe Crossmember, Front; Front Crossmember
- Manufacturer Note: Bar Only
- Position: Front
- Replaces: 1L2Z-5019-AA
Fits the following Mercury Models:
- Mountaineer | 2002-2005 | Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Mercury Cross Bar, Front Part Number: 3L2Z-5019-AB
Product Specifications
- Other Name: Cross Member Assembly; Suspension Subframe Crossmember, Front; Front Crossmember
- Manufacturer Note: Complete Kit - Required When Replacing Vehicle Frame
- Position: Front
- Replaces: 1L2Z-5019-AB
Fits the following Mercury Models:
- Mountaineer | 2003-2005 | Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Mercury Torsion Bar, Front Center Part Number: 3L2Z-5B112-AA
Product Specifications
- Other Name: Cross Member Assembly; Frame Crossmember, Front Center; Center Crossmember
- Manufacturer Note: Tube Assembly
- Position: Front Center
- Replaces: 1L2Z-5B112-BA
Fits the following Mercury Models:
- Mountaineer | 2002-2005 | Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Mercury Engine Cradle, Front Part Number: 4F1Z-5C145-AA
Product Specifications
- Other Name: Frame Assembly; Engine Cradle, Front
- Position: Front
Fits the following Mercury Models:
- Sable | 2004-2005 | GS, LS, LS Premium, Platinum Edition | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Frame Assembly Part Number: 5L2Z-5005-A
Product Specifications
- Other Name: Frame Rail
Fits the following Mercury Models:
- Mountaineer | 2003-2005 | Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Mercury Frame Assembly Part Number: 5L2Z-5005-B
Product Specifications
- Other Name: Frame Rail
Fits the following Mercury Models:
- Mountaineer | 2002 | Base | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Mercury Rear Crossmember Part Number: 5L8Z-5035-CA
Product Specifications
- Other Name: Cross Member Assembly; Suspension Subframe Crossmember, Rear; Crossmember
- Position: Rear
Fits the following Mercury Models:
- Mariner | 2005 | Base, Premier | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mercury Rear Crossmember Part Number: 5L8Z-5035-DA
Product Specifications
- Other Name: Cross Member Assembly; Suspension Subframe Crossmember, Rear; Crossmember
- Position: Rear
Fits the following Mercury Models:
- Mariner | 2005 | Base, Premier | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS

| Page 1 of 3 |Next >

1-20 of 53 Results

Mercury Axle Beam

If you own Mercury and want to keep it in top shape, choosing OEM Axle Beam is a smart move. They are precisely engineered and follow strict factory standards. They are made in advanced facilities that use cutting edge technology. Each part goes through thorough testing to confirm strength and safety, so you can trust it. FordPartsDeal.com gives you genuine Mercury Axle Beam at some of the affordable online prices without cutting quality. Every OEM Mercury part includes the manufacturer's warranty, easy returns, and super-fast delivery. So why wait? Shop now and get your vehicle back to peak condition.

Mercury Axle Beam has wheels to lock so as to cut off sway and make the vehicle drive straight. Mercury was launched in 1938 as a combination of plush ride, crisp styling and a quieter cabin to allow regular drivers to experience luxury at an affordable price without losing the sense of the road. Model after model, Mercury struck the right balance between price and finish, filling roomy seats, supple suspensions and controls that were intuitive and reduced fatigue on long weekend highway journeys. The badge chosen by the fleet-footed deity informed shoppers at a rapid pace that comfort was to be felt, and consistent improvements kept dashboards up to date and drivers to reliable service in the ever-changing auto trends. Mercury is hanging onto its legacy even after production ceased in 2011 as evidence that mid-size cars can be luxurious, yet remain rugged, and still be mindful of limited finances. The Axle Beam is positioned between the wheels and shoulders mass, affects the lateral forces and maintains the camber and toe level even in situations where potholes bang upwards or cargo slides against the axle in case of an abrupt braking on wet pavement. Each Axle Beam is formed by fabricators of heavy steel, welded at the important points, and pressed in the bushings which allow it to flex yet retain the structural rigidity of the suspension arms. One Axle Beam results in reduced joints to loosen, thus reducing vibration, decreasing tire wear, and improving steering response during daily cornering. Install a new Axle Beam that was bent and the chassis takes on a factory feel, braking tracks straight and high-speed lane changes are calmed down in seconds.

Mercury Axle Beam Parts and Q&A

Engine Cradle
3F2Z-5C145-CA
Q: How to service and repair the axle beam on Mercury Monterey?
A:
The vehicle requires neutral gear and hoisting to perform axle beam service and repair. Take away the rear brake discs before breaking the connections of brake lines and rear wheel speed sensor wire harness from the rear axle assembly. A suitable high-lift jack functioning as support must be utilized to protect vehicle components when removing the trackbar arm because the rear axle assembly needs to be kept stable first. Disconnect the trackbar arm from the axle by first removing its bolt and then its arm from the axle mounting bracket before installing and tightening it to 103 Nm (76 ft. lbs). Tighten the new installation of shock absorber lower bolts and nuts to 80 Nm (59 ft. lbs). Secure the new installation of nuts and parking brake cable brackets to 25 Nm (18 ft. lbs). When removing the springs the insulators from the spring may separate from the spring metal; lower the axle assembly at a controlled rate before taking off the rear springs. You should replace the trailing arm nuts and bolts before securely tightening them to 133 Nm (98 ft. lbs). To complete the process return the axle assembly in reverse order of the removal steps. Rebuilding the suspension requires substituting all fasteners with parts that match their original number or approved equivalents along with torquing these crucial elements precisely as the manufacturer specifies.