How to service and repair the ignition switch on Mercury Grand Marquis?

Service and repair operations on the ignition switch need to start by depowering the supplemental restraint system (SRS). Start by placing the ignition switch lock cylinder at RUN and use a suitable tool to push upward on the release tab which allows you to pull the cylinder outward. First unlatch and remove the tilt lever from the steering wheel before pushing the upper steering column shroud sides to release it. The upper and lower steering column shrouds need their three screws removed but reinstallation must follow with screw tightening to 2 Nm (18 inch lbs.). Disconnect the ignition switch electrical connector before removing its screw to extract the switch while torquing it to 5 Nm (44 inch lbs.) during installation. The SRS repowering process should start with a reversal of the removal sequence.

How to service and repair the ignition switch on Mercury Mariner?

Service and repair of the ignition switch requires starting with supplemental restraint system (SRS) deactivation. Start by removing the instrument panel steering column cover before proceeding to take off three lower steering column cover mounting screws which will let you remove the lower steering column cover. Before moving forward remove the steering column covers at their specified locations then uninstall the electrical connector of the ignition switch. Proceed by setting the steering column to its most downward position followed by disconnecting the ignition switch by pushing the two tabs and pulling it out of position. The process of installing the replacement ignition switch requires both the return of removal steps and activation of the supplemental restraint system (SRS).

OEM Mercury Ignition Switch

Starter Ignition Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

14 Ignition Switches found

View related parts
Mercury Ignition Switch Part Number: DG9Z-11572-A
$65.75 MSRP: $108.18
You Save: $42.43 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Switch Assembly - Ignition; Ignition Starter Switch; Ignition Lock Cylinder
- Replaces: 98AZ-11572-A, YS4Z-11572-AC, SW-6343
Fits the following Mercury Models:
- Mariner | 2005-2011 | Base, Convenience, Hybrid, Luxury, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
- Milan | 2006-2011 | Base, Hybrid, Premier | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
- Montego | 2005-2007 | Luxury, Premier | 6 Cyl 3.0 L GAS
- Mountaineer | 2002-2010 | Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
- Sable | 2008-2009 | Base, Premier | 6 Cyl 3.5 L GAS
View More
View related parts
Mercury Ignition Switch Part Number: F29Z-11572-D
$27.48 MSRP: $43.64
You Save: $16.16 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly - Ignition; Ignition Starter Switch
Fits the following Mercury Models:
- Capri | 1991-1994, 1985-1986 | 5.0, Base, GS, RS, XR2 | 4 Cyl 1.6 L GAS, 4 Cyl 2.3 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.0 L GAS
- Colony Park | 1987-1989 | GS, LS | 8 Cyl 5.0 L GAS
- Cougar | 1984-1993 | Base, LS, XR-7 | 4 Cyl 2.3 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.0 L GAS
- Grand Marquis | 1984-1989 | Base, Colony Park, GS, LS | 8 Cyl 5.0 L GAS, 8 Cyl 5.8 L GAS
- Lynx | 1984-1987 | Base, GL, GS, L, XR3 | 4 Cyl 1.6 L GAS, 4 Cyl 1.9 L GAS, 4 Cyl 2.0 L DIESEL
- Marquis | 1984-1986 | Base, Brougham | 4 Cyl 2.3 L GAS, 4 Cyl 2.3 L LPG, 6 Cyl 3.8 L GAS
- Topaz | 1984-1994 | Base, GS, GS AWD, LS, LS AWD, LTS, LTS AWD, Sport, Sport AWD, XR5, XR5 AWD | 4 Cyl 2.0 L DIESEL, 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View More
View related parts
Mercury Ignition Switch Part Number: 5W1Z-11572-AA
$42.02 MSRP: $66.73
You Save: $24.71 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly - Ignition
Fits the following Mercury Models:
- Grand Marquis | 2005-2011 | GS, GSL, Limited Edition, LS, Ultimate Edition | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Mercury Ignition Switch Part Number: 5C3Z-11572-AA
$46.49 MSRP: $73.82
You Save: $27.33 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly - Ignition
- Manufacturer Note: SWITCH, IGNITION ASM
Fits the following Mercury Models:
- Monterey | 2005-2007 | Convenience, Luxury, Premier | 6 Cyl 4.2 L GAS
View related parts
Mercury Ignition Switch Part Number: F5TZ-11572-A
$27.14 MSRP: $47.62
You Save: $20.48 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly - Ignition; Ignition Starter Switch
Fits the following Mercury Models:
- Mountaineer | 1997 | Base | 8 Cyl 5.0 L GAS
View related parts
Mercury Ignition Switch Part Number: DG9Z-11572-B
$28.63 MSRP: $45.45
You Save: $16.82 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly - Ignition
- Replaces: YS4Z-11572-CA, SW-5506
Fits the following Mercury Models:
- Mariner | 2005-2007 | Base, Convenience, Hybrid, Luxury, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mercury Ignition Switch Part Number: E7DZ-11572-A
$9.66 MSRP: $13.37
You Save: $3.71 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly - Ignition
- Manufacturer Note: REFER TO GROUP 14A411 FOR MATING WIRE ASY.
Fits the following Mercury Models:
- Sable | 1986-1990 | GS, LS | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Mercury Ignition Switch Part Number: F5CZ-11572-AA
Product Specifications
- Other Name: Switch Assembly - Ignition
- Manufacturer Note: "T" shaped connector, BEFORE 12/1/95
- Replaces: F4CZ-11572-A, FOCZ-11572-A
Fits the following Mercury Models:
- Tracer | 1992-1996 | Base, LTS, Trio | 4 Cyl 1.8 L GAS, 4 Cyl 1.9 L GAS
View related parts
Mercury Ignition Switch Part Number: F4DZ-11572-B
$48.35 MSRP: $75.45
You Save: $27.10 (36%)
Product Specifications
- Other Name: Switch Assembly - Ignition
Fits the following Mercury Models:
- Colony Park | 1990-1991 | GS, LS | 8 Cyl 5.0 L GAS
- Cougar | 1994-1997 | XR-7 | 6 Cyl 3.8 L GAS, 8 Cyl 4.6 L GAS
- Grand Marquis | 1990-2004 | GS, LS, LSE | 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS
- Marauder | 2003-2004 | Base | 8 Cyl 4.6 L GAS
- Monterey | 2004 | Base, Premier | 6 Cyl 4.2 L GAS
- Mountaineer | 1998-2001 | Base | 6 Cyl 4.0 L GAS, 8 Cyl 5.0 L GAS
- Sable | 1992-2005 | G, GS, LS, LS Premium, LTS, Platinum Edition | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
- Villager | 1994-1995 | GS, LS, Nautica | 6 Cyl 3.0 L GAS
View More
View related parts
Mercury Ignition Switch Part Number: F8RZ-11572-AA
Product Specifications
- Other Name: Switch Assembly - Ignition
Fits the following Mercury Models:
- Cougar | 1999-2002 | Base, S, V6 | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
- Mystique | 1998-2000 | GS, LS | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Mercury Ignition Switch Part Number: F7CZ-11572-BB
Product Specifications
- Other Name: Switch Assembly - Ignition
- Manufacturer Note: Includes cylinder and switch, M/T
Fits the following Mercury Models:
- Tracer | 1997-1999 | GS, LS, Trio | 4 Cyl 2.0 L GAS
View related parts
Mercury Ignition Switch Part Number: F7CZ-11572-AA
Product Specifications
- Other Name: Switch Assembly - Ignition
- Manufacturer Note: Includes cylinder and switch, A/T
Fits the following Mercury Models:
- Tracer | 1997-1999 | GS, LS, Trio | 4 Cyl 2.0 L GAS
View related parts
Mercury Ignition Switch Part Number: F5TZ-19A438-A
Product Specifications
- Other Name: Switch Assembly - Ignition
- Manufacturer Note: FROM 01/17/95
Fits the following Mercury Models:
- Mountaineer | 1997-2001 | Base | 6 Cyl 4.0 L GAS, 8 Cyl 5.0 L GAS
View related parts
Mercury Ignition Switch Part Number: F5RZ-11572-B
Product Specifications
- Other Name: Switch Assembly - Ignition
Fits the following Mercury Models:
- Mystique | 1995-1997 | Base, GS, GS Spree, LS, LS Young America | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS

Mercury Ignition Switch

If you own Mercury and want to keep it in top shape, choosing OEM Ignition Switch is a smart move. They are precisely engineered and follow strict factory standards. They are made in advanced facilities that use cutting edge technology. Each part goes through thorough testing to confirm strength and safety, so you can trust it. FordPartsDeal.com gives you genuine Mercury Ignition Switch at some of the affordable online prices without cutting quality. Every OEM Mercury part includes the manufacturer's warranty, easy returns, and super-fast delivery. So why wait? Shop now and get your vehicle back to peak condition.

The Ignition Switch of Mercury is located at the back of the key slot and connects battery power to components, coils, and the starter to light off the engine and the gauges. Mercury customers always wanted to be able to ride over potholes without floating, and the brand provided them with heavy subframes, tuned springs, and steering that was exactly planted but light. Mercury models had cabins that surrounded the passengers with heavy door seals as well as carpets to drown out road hiss so that conversations were easy at highway speeds. Even the smaller Mercury Cougars had large seat travel, easy-to-read gauges, and simple controls that would not make a driver scramble to locate the essentials. These touches demonstrated that Mercury was value conscious and at the same time made a moment and provided family members with a relatively inexpensive means of feeling a step above the scene. They claim that today owners still boast of the cars with stout drives, stable electrical configurations, and easy ability to reach parts such as the Ignition Switch in case of service calls. The installation of an Ignition Switch begins by removing the negative battery cable, after which the column shroud is removed with a trim tool to reveal the switch body of the steering hub. Turn the key on, press the release pin, slide the lock cylinder out, disconnect the harness, and remove the single screw that holds the lock cylinder. Install the new Ignition Switch with the locator, screw, connector, and reinstall the cylinder, the shroud, and the battery, and ensure that the keys fit into their respective positions.

Mercury Ignition Switch Parts and Q&A

Ignition Switch
5W1Z-11572-AA
Q: How to service and repair the ignition switch on Mercury Grand Marquis?
A:
Service and repair operations on the ignition switch need to start by depowering the supplemental restraint system (SRS). Start by placing the ignition switch lock cylinder at RUN and use a suitable tool to push upward on the release tab which allows you to pull the cylinder outward. First unlatch and remove the tilt lever from the steering wheel before pushing the upper steering column shroud sides to release it. The upper and lower steering column shrouds need their three screws removed but reinstallation must follow with screw tightening to 2 Nm (18 inch lbs.). Disconnect the ignition switch electrical connector before removing its screw to extract the switch while torquing it to 5 Nm (44 inch lbs.) during installation. The SRS repowering process should start with a reversal of the removal sequence.
Ignition Switch
DG9Z-11572-A
Q: How to service and repair the ignition switch on Mercury Mariner?
A:
Service and repair of the ignition switch requires starting with supplemental restraint system (SRS) deactivation. Start by removing the instrument panel steering column cover before proceeding to take off three lower steering column cover mounting screws which will let you remove the lower steering column cover. Before moving forward remove the steering column covers at their specified locations then uninstall the electrical connector of the ignition switch. Proceed by setting the steering column to its most downward position followed by disconnecting the ignition switch by pushing the two tabs and pulling it out of position. The process of installing the replacement ignition switch requires both the return of removal steps and activation of the supplemental restraint system (SRS).