How to Service and Repair the A/C Hose from Condenser to Evaporator on 2006 Mercury Mountaineer?

The procedure for servicing the condenser to evaporator line requires first clearing the air cleaner and air cleaner outlet tube followed by refrigerant recovery. Men first need to remove the powertrain control module (PCM) along with its bracket and unplug the right-hand wheel speed sensor electrical connector and separate the wire harness from the condenser-to-evaporator line bracket. Before reinstalling the suction accumulator-to-compressor line bracket for vehicles using engine size 4.6L you should tighten the nut to 7 Nm (62 lb-in). Disassemble the evaporator core by removing the access fitting and discarding its O-ring seal and then loosen the condenser-to-evaporator nut while tightening it to 7 Nm (62 lb-in) during reinstallation. The fitting condenser outlet requires removal followed by disconnecting it while discarding the O-ring seal before tightening to 8 Nm (71 lb-in). Divide and separate the inlet fittings from auxiliary evaporator equipment by discarding O-ring seals. Start by removing the front section from the condenser-to-evaporator line followed by disconnecting the A/C line bracket nut at the dash panel before detaching the bracket and tightening it to 6Nm (53lb.in). The technician disconnects the evaporator inlet fitting and eliminates both O-ring seals to access the back section of the condenser-to-evaporator line. The installation involves following the reverse order of removal steps and applying new O-ring seals while adding the precise amount of clean PAG oil for refrigerant system lubrication. The refrigerant system needs evacuation then leak-testing before receiving the required charge.

OEM 2006 Mercury Mountaineer A/C Hose

Air Conditioning Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

15 A/C Hoses found

View related parts
2006 Mercury Mountaineer Discharge Line, Front
Part Number: 9L2Z-19972-D
$153.60 MSRP: $252.73
You Save: $99.13 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Hose, Front; A/C Refrigerant Liquid Hose; A/C Hose; A/C Tube
- Manufacturer Note: Compressor to condenser
- Position: Front
- Replaces: 6L2Z-19972-DA, 8L2Z-19972-D
- Base No.: 19972
- Item Weight: 2.00 Pounds
- Item Dimensions: 16.3 x 5.6 x 16.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L2Z-19972-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Mercury Mountaineer Submodels:
- Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L GAS
View related parts
2006 Mercury Mountaineer Tube Assembly, Rear
Part Number: 6L2Z-19867-AA
$44.71 MSRP: $61.85
You Save: $17.14 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: A/C Refrigerant Hose, Rear; A/C Hose
- Position: Rear
- Replaces: 1L2Z-19867-AA
- Base No.: 19867
- Item Weight: 0.70 Pounds
- Item Dimensions: 4.3 x 9.5 x 21.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L2Z-19867-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Mercury Mountaineer Submodels:
- Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2006 Mercury Mountaineer Liquid Line, Front
Part Number: 7L2Z-19835-LA
$70.50 MSRP: $97.54
You Save: $27.04 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Hose, Front; A/C Refrigerant Liquid Hose; A/C Hose; Hose & Tube Assembly
- Position: Front
- Replaces: 6L2Z-19835-LA
- Base No.: 19835B
- Item Weight: 5.40 Pounds
- Item Dimensions: 40.8 x 21.2 x 11.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L2Z-19835-LA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Mercury Mountaineer Submodels:
- Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2006 Mercury Mountaineer Suction Line, Front
Part Number: 8L2Z-19867-D
$53.72 MSRP: $74.31
You Save: $20.59 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Hose, Front; A/C Refrigerant Liquid Hose; A/C Hose; Connector Hose
- Position: Front
- Replaces: 6L2Z-19867-EA, YF-3185
- Base No.: 19867
- Item Weight: 2.20 Pounds
- Item Dimensions: 8.7 x 11.4 x 21.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L2Z-19867-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Mercury Mountaineer Submodels:
- Luxury, Premier | 8 Cyl 4.6 L GAS
View related parts
2006 Mercury Mountaineer A/C Hose, Front
Part Number: 9L2Z-19D742-C
$39.04 MSRP: $54.01
You Save: $14.97 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Suction Hose, Front; A/C Refrigerant Hose, Front; A/C Refrigerant Liquid Hose; A/C Line; Suction Line
- Position: Front
- Replaces: 6L2Z-19D742-AA, 9L2Z-19D742-A, YF-3177
- Base No.: 19D742
- Item Weight: 0.90 Pounds
- Item Dimensions: 1.2 x 3.5 x 30.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L2Z-19D742-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Mercury Mountaineer Submodels:
- Luxury, Premier | 8 Cyl 4.6 L GAS
View related parts
2006 Mercury Mountaineer A/C Line, Front
Part Number: 8L2Z-19867-C
$28.57 MSRP: $39.52
You Save: $10.95 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Suction Hose, Rear & Front; A/C Liquid Hose; Suction Line; Connector Hose
- Position: Front
- Replaces: YF-3184, 6L2Z-19867-DA
- Base No.: 19867
- Item Weight: 1.30 Pounds
- Item Dimensions: 5.7 x 9.5 x 14.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L2Z-19867-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Mercury Mountaineer Submodels:
- Luxury, Premier | 8 Cyl 4.6 L GAS
View related parts
2006 Mercury Mountaineer Discharge Line, Front
Part Number: 9L2Z-19972-B
$86.28 MSRP: $117.41
You Save: $31.13 (27%)
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Hose, Front; A/C Refrigerant Liquid Hose; A/C Hose; A/C Tube
- Manufacturer Note: Compressor to condenser
- Position: Front
- Replaces: 6L2Z-19972-BA, 7L2Z-19972-B
- Base No.: 19972
- Item Weight: 4.90 Pounds
- Item Dimensions: 13.0 x 16.3 x 32.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L2Z-19972-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Mercury Mountaineer Submodels:
- Luxury, Premier | 8 Cyl 4.6 L GAS
View related parts
2006 Mercury Mountaineer A/C Hose, Front
Part Number: 9L2Z-19D742-D
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Hose, Front; A/C Refrigerant Liquid Hose; Suction Line
- Position: Front
- Replaces: 6L2Z-19D742-BA, 9L2Z-19D742-B
- Base No.: 19D742
- Item Weight: 0.90 Pounds
- Item Dimensions: 2.9 x 3.9 x 30.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L2Z-19D742-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Mercury Mountaineer Submodels:
- Luxury, Premier | 8 Cyl 4.6 L GAS
View related parts
2006 Mercury Mountaineer A/C Line, Front
Part Number: 8L2Z-19835-C
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Suction Hose; A/C Refrigerant Hose, Front; A/C Refrigerant Liquid Hose; A/C Hose; Liquid Line; Hose & Tube Assembly
- Position: Front
- Replaces: 6L2Z-19835-BA
- Base No.: 19835A
- Item Weight: 6.10 Pounds
- Item Dimensions: 29.6 x 25.4 x 12.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L2Z-19835-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Mercury Mountaineer Submodels:
- Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2006 Mercury Mountaineer A/C Hose, Front
Part Number: 9L2Z-19867-C
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Suction Hose; A/C Refrigerant Hose, Front; A/C Refrigerant Liquid Hose; Suction Line; Pressure Line
- Manufacturer Note: Accumulator to compressor
- Position: Front
- Replaces: 8L2Z-19867-A, 9L2Z-19867-A, 6L2Z-19867-FA
- Base No.: 19867
- Item Weight: 3.10 Pounds
- Item Dimensions: 7.2 x 28.8 x 41.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L2Z-19867-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Mercury Mountaineer Submodels:
- Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L GAS
View related parts
2006 Mercury Mountaineer A/C Hose
Part Number: 6L2Z-19835-FA
Product Specifications
- Other Name: Tube Assembly; Hose
- Replaces: 1L2Z-19835-AE
- Base No.: 19835
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.9 x 7.1 x 21.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L2Z-19835-FA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Mercury Mountaineer Submodels:
- Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2006 Mercury Mountaineer Discharge Line, Front
Part Number: 9L2Z-19972-C
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Discharge Hose; A/C Refrigerant Hose, Front; A/C Refrigerant Liquid Hose; A/C Hose; A/C Tube; Pressure Tube
- Manufacturer Note: Compressor to condenser
- Position: Front
- Replaces: 6L2Z-19972-CA, 8L2Z-19972-C
- Base No.: 19972
- Item Weight: 2.60 Pounds
- Item Dimensions: 32.3 x 4.7 x 15.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L2Z-19972-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Mercury Mountaineer Submodels:
- Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L GAS
View related parts
2006 Mercury Mountaineer A/C Hose, Front
Part Number: 9L2Z-19867-D
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Hose, Front; A/C Refrigerant Liquid Hose; Suction Line
- Manufacturer Note: Accumulator to compressor
- Position: Front
- Replaces: 8L2Z-19867-B, 9L2Z-19867-B, 6L2Z-19867-GA
- Base No.: 19867
- Item Weight: 2.20 Pounds
- Item Dimensions: 14.7 x 32.1 x 38.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L2Z-19867-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Mercury Mountaineer Submodels:
- Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L GAS
View related parts
2006 Mercury Mountaineer A/C Line, Front
Part Number: 7L2Z-19835-HA
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Hose, Front; A/C Refrigerant Liquid Hose; A/C Hose; Liquid Line; Hose & Tube Assembly
- Position: Front
- Replaces: 6L2Z-19835-HA
- Base No.: 19835B
- Item Weight: 1.10 Pounds
- Item Dimensions: 4.7 x 18.0 x 46.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L2Z-19835-HA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Mercury Mountaineer Submodels:
- Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2006 Mercury Mountaineer Discharge Line, Front
Part Number: 9L2Z-19972-A
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Discharge Hose; A/C Refrigerant Hose, Front; A/C Refrigerant Liquid Hose; A/C Hose; A/C Tube; Pressure Tube
- Manufacturer Note: Compressor to condenser
- Position: Front
- Replaces: 7L2Z-19972-A, 6L2Z-19972-AA
- Base No.: 19972
- Item Weight: 1.40 Pounds
- Item Dimensions: 12.2 x 29.6 x 32.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L2Z-19972-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Mercury Mountaineer Submodels:
- Luxury, Premier | 8 Cyl 4.6 L GAS

2006 Mercury Mountaineer A/C Hose

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Mercury Mountaineer A/C Hose available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Mercury Mountaineer A/C Hose as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Mercury Mountaineer A/C Hose Parts Questions & Experts Answers

Q: How to Service and Repair the A/C Hose from Condenser to Evaporator on 2006 Mercury Mountaineer?
A: The procedure for servicing the condenser to evaporator line requires first clearing the air cleaner and air cleaner outlet tube followed by refrigerant recovery. Men first need to remove the powertrain control module (PCM) along with its bracket and unplug the right-hand wheel speed sensor electrical connector and separate the wire harness from the condenser-to-evaporator line bracket. Before reinstalling the suction accumulator-to-compressor line bracket for vehicles using engine size 4.6L you should tighten the nut to 7 Nm (62 lb-in). Disassemble the evaporator core by removing the access fitting and discarding its O-ring seal and then loosen the condenser-to-evaporator nut while tightening it to 7 Nm (62 lb-in) during reinstallation. The fitting condenser outlet requires removal followed by disconnecting it while discarding the O-ring seal before tightening to 8 Nm (71 lb-in). Divide and separate the inlet fittings from auxiliary evaporator equipment by discarding O-ring seals. Start by removing the front section from the condenser-to-evaporator line followed by disconnecting the A/C line bracket nut at the dash panel before detaching the bracket and tightening it to 6Nm (53lb.in). The technician disconnects the evaporator inlet fitting and eliminates both O-ring seals to access the back section of the condenser-to-evaporator line. The installation involves following the reverse order of removal steps and applying new O-ring seals while adding the precise amount of clean PAG oil for refrigerant system lubrication. The refrigerant system needs evacuation then leak-testing before receiving the required charge.