Expedition | 2022-2024 | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, Timberline, XL, XL STX, XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
| Page 1 of 31 |Next >
1-20 of 616 Results
Ford Air Deflector Parts Questions & Experts Answers
Q: How to Service the Sunroof Air Deflector on Ford Explorer?
A: Service of the sunroof or moonroof windguard starts by putting the roof opening panel in its completely open state. You need to remove the air deflector by unfastening its 4 screws while you should tighten these screws to 1 Nm (9 lb-in settings when reinstalling. Separate the air deflector from its frame which belongs to the roof opening panel. Initiate the roof opening panel motor according to requirements after performing the reverse order of removal.
Q: How to service and repair the sunroof or moonroof Air Deflector on Ford F-150?
A: The service and repair process for sunroof or moonroof windguard requires the removal of two air deflector screws at first step. Detach the air deflector by rotating its front end upward while sliding the pivot points toward the back of the vehicle until it releases from the retaining hooks. The process of installation requires the same steps in reverse order to the removal sequence.
Q: How to service and repair the sunroof or moonroof air deflector on Ford Focus?
A: Start fixing or maintaining the windguard attached to sunroofs or moonoofs by opening the roof panel to its complete extent. The top vehicle position requires the use of a flat-blade screwdriver to activate spring steel locating tabs on each side by pressing them down while you guide the deflector to the back. Raise the air deflector until it reaches an upward position before drawing it forward to eliminate it. Follow the reverse order of removal to install the system by securely locking the locating tabs. The roof opening panel motor should be initialized when necessary.