Q: How to Service and Repair the Engine Oil Dipstick Tube on Ford Focus?
A: You should start your engine oil dip stick and dip stick tube service by taking out the oil level indicator which will remain set aside. Service of the oil level indicator tube requires two bolt removal for the 2.3L engine but only one bolt for the 2.0L engine. Return the tube by following the opposite steps of removal then adjust the bolts to 10 Nm (89 inch lbs.).
Q: How to Service and Repair the Engine Oil Dipstick Tube on Ford Mustang?
A: The first step for maintaining the engine oil dip stick along with its tube requires removal of the oil level indicator tube by unfastening the bolt and pulling out the tube. The oil level indicator tube has an O-ring that engineers should discard after removing it. Install the products in the opposite direction of removal steps.
Q: How to service and repair the engine oil dipstick and dipstick tube on Ford Ranger?
A: Before servicing or repairing engine oil dipstick and tube components you should eliminate the oil dipstick then cleanse both sealing areas with Metal Surface Cleaner F4AZ-19A536-RA or Ford WSE-M5A392-A equivalent product. The procedure begins with disconnecting the oil level indicator tube through bolt removal followed by removing the tube itself. The tube cannot be reinstalled within a 4-minute timeframe so the sealant must be removed whereas the sealing area requires a second cleaning application of Metal Surface Cleaner F4AZ-19A536-RA or an equivalent cleaning solvent that adheres to Ford specification WSE-M5B392-A followed by precision dry time measurement as either the total absence of wetness or 4 minutes, whichever duration is extended ensures future oil leakage prevention. Install Silicone Gasket F7AZ-19554-EA which fulfills WSE-M4G323-A4 Ford specification on the cylinder block before placing the oil level indicator tube alongside bolt tightening and oil level dipstick reinstallation.