How to Service and Repair the A/C Hose for the Auxiliary Heater Inlet and Outlet Lines on Ford Expedition?

Service and repair work on auxiliary heater inlet and outlet lines should start by hoisting the vehicle to a position while it remains in neutral gear and drains all engine coolant. The first steps involve removing the spare tire together with the RH front wheel and tire and then taking off the RH fender splash shield. Disconnection processes for auxiliary heater lines should begin with one-fitment service when only one outlet or inlet is being repaired by removing the appropriate quick disconnect fittings. You can reach the front auxiliary line bracket nut and the bracket along with the front bolt of the RH catalytic converter heat shield by removing them from the RH fender well opening. Expedition EL or Navigator L models need to remove the RH rear wheel as well as the tire from their position. The procedure requires you to remove the auxiliary heater outlet and inlet line quick disconnect fittings which are attached to the heater core at the floor pan. You need to remove the muffler followed by the three splash shield bolts that secure the spare tire carrier and the three muffler heat shield bolts and exhaust hanger bolts and RH Catalyst Monitor Sensor (CMS). You must complete the removal of heat shield bolts and auxiliary line bracket nuts. The desired single line replacement must receive cutting then placement of replacement line segments in the identical position as prior lines while using fittings from the new lines for cutting measurements. Cut the auxiliary heater line middle section(s) at the RH rear wheel well opening of Expedition EL or Navigator L vehicles, but do this at the front section of Expedition and Navigator vehicles. All extra fragments from the auxiliary heater inlet and outlet lines need to be completely eliminated. Installation begins with connecting the rear parts of inlet and outlet auxiliary heater lines and the quick disconnect fittings before proceeding with front lines. Expedition EL or Navigator L owners should loosely connect center sections of their auxiliary heater lines through the rear wheel well opening on the right-hand side while users of Expedition or Navigator models need to position these lines toward the front of the vehicle. Begin by installing the first three auxiliary line brackets and their nuts until they reach 5 Nm (44 lb-in) torque and then secure the middle fittings while looking for proper alignment of the lines to perform adjustments as needed. Proceed with the following installation order: RH catalytic converter heat shield, RH CMS, exhaust hanger, muffler heat shield, muffler, and spare tire carrier splash shield along with its bolts. You must use the RH fender well opening to install the front auxiliary line bracket with its nut to a torque of 5 Nm (44 lb-in) before placing back the RH front fender splash shield, the RH front wheel and tire together with the RH rear wheel and tire for Expedition EL or Navigator L models. Reinstallation of the spare tire goes together with engine cooling system filling.

OEM Ford Expedition A/C Hose

Air Conditioning Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

57 A/C Hoses found

View related parts
Ford Expedition Discharge Hose, Front Part Number: 9L3Z-19972-C
$140.89 MSRP: $231.82
You Save: $90.93 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Discharge Hose; Front A/C Hose; Liquid A/C Hose; Pressure Hose; Discharge Line; A/C Tube
- Manufacturer Note: Compressor to condenser
- Position: Front
- Replaces: 7L1Z-19972-A, 9L3Z-19972-A, 9L3Z-19972-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2009 Ford Expedition | Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition A/C Hose, Front Upper Part Number: 2L1Z-19835-AA
$26.34 MSRP: $41.82
You Save: $15.48 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; A/C Hose Assembly, Front Upper; A/C Refrigerant Liquid Hose; Hose
- Manufacturer Note: Expansion valve to evaporator-outlet
- Position: Front Upper
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2006 Ford Expedition | Eddie Bauer, King Ranch, Limited, NBX, XLS, XLT, XLT Sport | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition A/C Hose, Front Lower Part Number: 2L1Z-19835-CA
$49.24 MSRP: $78.18
You Save: $28.94 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; A/C Hose Assembly, Front Lower; A/C Refrigerant Liquid Hose; Hose
- Manufacturer Note: Expansion valve to evaporator-inlet
- Position: Front Lower
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2006 Ford Expedition | Eddie Bauer, King Ranch, Limited, NBX, XLS, XLT, XLT Sport | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition A/C Tube Part Number: JL1Z-19867-CA
$233.67 MSRP: $388.00
You Save: $154.33 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Suction Hose; A/C Refrigerant Liquid Hose; A/C Hose
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2018-2024 Ford Expedition | King Ranch, Limited, Platinum, SSV, Timberline, XL, XL STX, XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Expedition A/C Line Part Number: FL1Z-19835-A
$162.88 MSRP: $268.00
You Save: $105.12 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Liquid Hose; A/C Hose
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2017 Ford Expedition | King Ranch, Limited, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS
View related parts
Ford Expedition A/C Line Part Number: JL1Z-19E631-AA
$61.88 MSRP: $101.82
You Save: $39.94 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube - Compressor Line; A/C Pipe; A/C Refrigerant Liquid Hose; A/C Hose
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2018-2021 Ford Expedition | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Suction Hose Part Number: HL3Z-19867-A
$61.88 MSRP: $101.82
You Save: $39.94 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Suction Hose; A/C Refrigerant Liquid Hose; A/C Hose; Suction Line; Return Hose
- Manufacturer Note: Air Conditioning Evaporator To Compressor
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2018-2023 Ford Expedition | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, Timberline, XL, XL STX, XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Discharge Hose Part Number: JL1Z-19972-BA
$61.88 MSRP: $101.82
You Save: $39.94 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Discharge Hose; A/C Refrigerant Liquid Hose; A/C Hose
- Manufacturer Note: Compressor to condenser
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2018-2021 Ford Expedition | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Discharge Line Part Number: JU2Z-19D734-G
$171.28 MSRP: $276.33
You Save: $105.05 (39%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube - Compressor To Manifold; A/C Manifold Assembly; Refrigerant Suction & Liquid Hose.; Hose & Tube Assembly
- Replaces: 2L1Z-19D850-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002-2006 Ford Expedition | Eddie Bauer, King Ranch, Limited, NBX, XLS, XLT, XLT Sport | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Discharge Hose Part Number: FL1Z-19972-A
$49.24 MSRP: $78.18
You Save: $28.94 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Liquid Hose; A/C Hose; Suction Hose; A/C Tube
- Manufacturer Note: Compressor to condenser
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2017 Ford Expedition | EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT, King Ranch, Limited, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Discharge Hose Part Number: FL1Z-19867-A
$61.88 MSRP: $101.82
You Save: $39.94 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Liquid Hose; A/C Hose; Suction Hose; Suction Tube
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2017 Ford Expedition | EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT, King Ranch, Limited, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS
View related parts
Ford Expedition A/C Tube Part Number: DL1Z-19972-A
$49.24 MSRP: $78.18
You Save: $28.94 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Discharge Hose; A/C Hose
- Manufacturer Note: Compressor to condenser
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2014 Ford Expedition | EL King Ranch, EL Limited, EL XL, EL XLT, King Ranch, Limited, XL, XLT | 8 Cyl 5.4 L FLEX
View related parts
Ford Expedition Suction Hose Part Number: JL1Z-19A834-AC
$116.38 MSRP: $169.40
You Save: $53.02 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Suction Hose; A/C Refrigerant Liquid Hose; A/C Hose; Liquid Hose
- Replaces: JL1Z-19A834-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2018-2023 Ford Expedition | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, Timberline, XL, XL STX, XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Discharge Hose Part Number: NL1Z-19972-B
$64.12 MSRP: $93.33
You Save: $29.21 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; Suction Tube; Liquid Line
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2022-2024 Ford Expedition | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, Timberline, XL, XL STX, XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Expedition A/C Tube Part Number: NL1Z-19867-H
$64.12 MSRP: $93.33
You Save: $29.21 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2022-2024 Ford Expedition | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, Timberline, XL, XL STX, XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Suction Tube Part Number: NL1Z-19A834-B
$102.71 MSRP: $149.50
You Save: $46.79 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Multiple Supercessions; Liquid Line; Liquid Hose
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2022-2024 Ford Expedition | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, Timberline, XL, XL STX, XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Discharge Hose Part Number: NL1Z-19972-A
$64.12 MSRP: $93.33
You Save: $29.21 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2022-2023 Ford Expedition | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, Timberline, XL, XL STX, XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Liquid Hose Part Number: NL1Z-19A834-A
$96.98 MSRP: $141.17
You Save: $44.19 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2022-2023 Ford Expedition | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, Timberline, XL, XL STX, XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Discharge Line Part Number: AU2Z-19D850-CA
Product Specifications
- Other Name: Tube - Compressor To Manifold; A/C Manifold and Tube Assembly; A/C Refrigerant Liquid Hose; A/C Hose; Hose & Tube Assembly
- Replaces: F75Z-19D850-BN, XL1Z-19D850-BA, YF-2580
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-2002 Ford Expedition | Eddie Bauer, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition A/C Line, Front Part Number: CL1Z-19E558-A
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Hose, Front; A/C Refrigerant Liquid Hose; A/C Hose
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012-2014 Ford Expedition | EL King Ranch, EL Limited, EL XL, EL XLT, King Ranch, Limited, XL, XLT | 8 Cyl 5.4 L FLEX

| Page 1 of 3 |Next >

1-20 of 57 Results

Ford Expedition A/C Hose

OEM A/C Hose boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get A/C Hose with long life and a perfect fit. Come to our website and find genuine Ford Expedition parts. We keep a wide inventory of OEM Expedition parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The A/C Hose is an important component that is used in the air conditioning of Ford Expedition cars regarded for their impressive durability and efficiency. This A/C Hose enables the movement of refrigerant, which plays a major role in removing heat in the cabin thus providing the right conditions. Due to high pressures, the A/C Hose incorporates aluminum fittings for every end which are crimped that reduces chances of leakage and thus extends the product's lifecycle. Variety of the Expedition models has been demonstrated, and while different types of the A/C Hose have been used over the years, the product has had to change with the new design and engineering of the Ford Expedition. All these promote the flexibility of the air conditioning system and at the same time assure the safety of the car through its compatibility with different conditions. The automotive market recognizes the A/C Hose as a distinctive product because of the durability of its materials and because of the product's function which affects the temperature of the cabin, ideal for use by families or those commuting long distances. Thus, the A/C Hose of Ford Expedition being an auto part is indeed durable and can last for a very long time to support the brand image of Ford. All in all, the A/C Hose part is crucial and very helpful in improving the feel of the ride in a Ford Expedition and also the safety of passengers.

Ford Expedition A/C Hose Parts and Q&A

A/C Line
CL1Z-19867-B
Q: How to Service and Repair the A/C Hose for the Auxiliary Heater Inlet and Outlet Lines on Ford Expedition?
A:
Service and repair work on auxiliary heater inlet and outlet lines should start by hoisting the vehicle to a position while it remains in neutral gear and drains all engine coolant. The first steps involve removing the spare tire together with the RH front wheel and tire and then taking off the RH fender splash shield. Disconnection processes for auxiliary heater lines should begin with one-fitment service when only one outlet or inlet is being repaired by removing the appropriate quick disconnect fittings. You can reach the front auxiliary line bracket nut and the bracket along with the front bolt of the RH catalytic converter heat shield by removing them from the RH fender well opening. Expedition EL or Navigator L models need to remove the RH rear wheel as well as the tire from their position. The procedure requires you to remove the auxiliary heater outlet and inlet line quick disconnect fittings which are attached to the heater core at the floor pan. You need to remove the Muffler followed by the three splash shield bolts that secure the spare tire carrier and the three muffler heat shield bolts and exhaust hanger bolts and RH Catalyst Monitor Sensor (CMS). You must complete the removal of heat shield bolts and auxiliary line bracket nuts. The desired single line replacement must receive cutting then placement of replacement line segments in the identical position as prior lines while using fittings from the new lines for cutting measurements. Cut the auxiliary heater line middle section(s) at the RH rear wheel well opening of Expedition EL or Navigator L vehicles, but do this at the front section of Expedition and Navigator vehicles. All extra fragments from the auxiliary heater inlet and outlet lines need to be completely eliminated. Installation begins with connecting the rear parts of inlet and outlet auxiliary heater lines and the quick disconnect fittings before proceeding with front lines. Expedition EL or Navigator L owners should loosely connect center sections of their auxiliary heater lines through the rear wheel well opening on the right-hand side while users of Expedition or Navigator models need to position these lines toward the front of the vehicle. Begin by installing the first three auxiliary line brackets and their nuts until they reach 5 Nm (44 lb-in) torque and then secure the middle fittings while looking for proper alignment of the lines to perform adjustments as needed. Proceed with the following installation order: RH catalytic converter heat shield, RH CMS, exhaust hanger, muffler heat shield, muffler, and spare tire carrier splash shield along with its bolts. You must use the RH fender well opening to install the front auxiliary line bracket with its nut to a torque of 5 Nm (44 lb-in) before placing back the RH front fender splash shield, the RH front wheel and tire together with the RH rear wheel and tire for Expedition EL or Navigator L models. Reinstallation of the spare tire goes together with engine cooling system filling.