How to service and repair the Steering Shaft on Ford Expedition?

The first step to work on the steering column shaft is to put the vehicle into neutral position and set it on a hoist. The front wheels must be straightened forward while setting the ignition to off and pulling out the key. A prevention system should block steering column shaft rotation when working on the intermediate shaft since this protects the clock spring from damage and necessitates recentering if rotation happens. Detach the steering column shaft from the steering column by removing first the bolt which you will discard before tightening a new bolt to 30 Nm (22 lb-ft) torque specification. First disconnect the upper intermediate shaft from the lower intermediate shaft by removing the bolt which should be discarded before installing a new bolt and tightening it to 48 Nm (35 lb-ft). Push the two bolts and dash seal along with the upper intermediate shaft out from their positions before tightening installation bolts to 12 Nm (9 lb-ft). The procedure for disconnecting begins with the removal of the lower steering column shaft bolt from the steering gear until installation when you should tighten the new one to 30 Nm (22 lb-ft). When reassembling the system you must replace all steering column shaft bolts according to the step-by-step reverse order of removal.

OEM Ford Expedition Steering Shaft

Steering Stem Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

14 Steering Shafts found

View related parts
Ford Expedition Upper Shaft Part Number: F7DZ-7361-A
$44.32 MSRP: $54.82
You Save: $10.50 (20%)
ADD TO CART
Product Specifications
- Other Name: Plunger - Gear Change Shaft Lock; Steering Shaft; Shift Lever Shaft; Shift Tube Shaft; Plunger; Shaft
- Replaces: F7DZ-7R264-AA, FODZ-7R264-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-2002 Ford Expedition | Eddie Bauer, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Intermediate Shaft, Center Part Number: 7L1Z-3E751-A
$247.20 MSRP: $363.00
You Save: $115.80 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Steering; Steering Shaft, Center; Center Shaft; Intermed Shaft; Steering Shaft
- Position: Center
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2014 Ford Expedition | Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XL, EL XLT, King Ranch, Limited, XL, XLT | 8 Cyl 5.4 L FLEX
View related parts
Ford Expedition Lower Shaft Part Number: 8L1Z-3B676-A
$216.79 MSRP: $347.27
You Save: $130.48 (38%)
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly; Steering Shaft Universal Joint; Steering Shaft, Lower; Lower Coupling; Steering Shaft
- Position: Lower
- Replaces: 7L1Z-3B676-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2014 Ford Expedition | Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XL, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Steering Column, Upper Part Number: F2UZ-3524-A
$180.58 MSRP: $278.67
You Save: $98.09 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Steering; Steering Shaft, Upper; Steering Shaft; Shaft Assembly; Upper Shaft; Shaft; Mainshaft
- Position: Upper
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-2002 Ford Expedition | Eddie Bauer, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Steering Shaft, Upper Part Number: F5TZ-3524-A
$125.09 MSRP: $192.50
You Save: $67.41 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft; Steering Shaft, Upper; Shaft Assembly; Upper Shaft
- Position: Upper
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-2002 Ford Expedition | Eddie Bauer, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Upper Shaft Part Number: 6L1Z-3E751-AA
$138.77 MSRP: $191.97
You Save: $53.20 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Steering; Steering Shaft, Upper; Lower Shaft; Steering Shaft
- Position: Upper
- Replaces: 3L1Z-3E751-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2006 Ford Expedition | Eddie Bauer, King Ranch, Limited, NBX, XLS, XLT, XLT Sport | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Intermediate Shaft, Upper Part Number: NL1Z-3E751-A
$267.18 MSRP: $392.33
You Save: $125.15 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Steering; Steering Shaft, Upper; Upper Shaft
- Position: Upper
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2018-2024 Ford Expedition | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, Timberline, XL, XL STX, XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Lower Shaft Part Number: NL1Z-3B676-A
$275.92 MSRP: $405.17
You Save: $129.25 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2022-2024 Ford Expedition | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XLT, Platinum, SSV, Timberline, XL STX, XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Lower Shaft Part Number: FL1Z-3B676-A
$260.94 MSRP: $383.17
You Save: $122.23 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly; Steering Shaft, Lower; Lower Coupling; Steering Shaft
- Position: Lower
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2017 Ford Expedition | EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT, King Ranch, Limited, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Lower Shaft Part Number: HL3Z-3B676-A
$233.47 MSRP: $342.83
You Save: $109.36 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly; Steering Shaft, Lower; Steering Shaft
- Position: Lower
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2018-2023 Ford Expedition | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, Timberline, XL, XL STX, XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Intermediate Shaft, Upper Part Number: FL1Z-3E751-C
$235.40 MSRP: $366.67
You Save: $131.27 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Steering; Steering Shaft, Upper; Center Shaft; Upper Shaft; Steering Shaft
- Position: Upper
- Replaces: FL1Z-3E751-A, FL1Z-3E751-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2017 Ford Expedition | Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Upper Shaft Part Number: 9L3Z-3B676-A
$148.50 MSRP: $229.17
You Save: $80.67 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Steering; Steering Shaft, Upper; Steering Shaft
- Position: Upper
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2014 Ford Expedition | Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XL, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Upper Shaft, Lower Part Number: 6L1Z-3B676-AA
Product Specifications
- Other Name: Shaft Assembly; Steering Shaft, Lower, Upper; Lower Shaft; Steering Shaft
- Position: Lower
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002-2006 Ford Expedition | Eddie Bauer, King Ranch, Limited, NBX, XLS, XLT, XLT Sport | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Lower Shaft Part Number: 3L3Z-3B676-AA
Product Specifications
- Other Name: Shaft Assembly; Steering Shaft, Lower; Steering Shaft
- Position: Lower
- Replaces: F75Z-3B676-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-2002 Ford Expedition | Eddie Bauer, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS

Ford Expedition Steering Shaft

OEM Steering Shaft boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Steering Shaft with long life and a perfect fit. Come to our website and find genuine Ford Expedition parts. We keep a wide inventory of OEM Expedition parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

This product commonly known as Ford Expedition Steering Shaft is an essential part that serves a crucial function to the success of Ford Expedition. This essential part relates to the linkages between the steering wheel on one side and the wheels of the car on the other end, which affects maneuverability and the comfort of the car during utilization. Durable, the Ford Expedition Steering Shaft is made from super quality material in a bid to ensure that it competes well with the current model of Expedition regardless of the model year as it was first produced in 1997. The Steering Shaft, in the same manner, should also be checked frequently because problems like difficulty in steering or grinding noises may emerge that would affect safety. The Ford Expedition can be described as a reliable car with a long service life, supported by an example recorded in the 2016 survey stating that the vehicle is among those possessing the longest life expectancy. The Steering Shaft goes along with this reputation by providing driving sensations that are clearly transmitted thanks to the Expedition's high-end engineering subtleties that include four-wheel independent suspension traveling and a highly resistant chassis. Also, Ford Expedition Steering Shaft is smart enough to incorporate itself with other smart system of the car like the adaptive air spring and six speed automatic transmissions to deliver optimal performance on the road in terms of efficiency and safety. Indeed, it is for the reason of reliability, performance and sophisticated aspects that Ford Expedition Steering Shaft is desirable in the market of automobiles and should not be overlooked in the whole process of the Ford Expedition.

Ford Expedition Steering Shaft Parts and Q&A

Lower Shaft
8L1Z-3B676-A
Q: How to service and repair the Steering Shaft on Ford Expedition?
A:
The first step to work on the steering column shaft is to put the vehicle into neutral position and set it on a hoist. The front wheels must be straightened forward while setting the ignition to off and pulling out the key. A prevention system should block steering column shaft rotation when working on the intermediate shaft since this protects the Clock Spring from damage and necessitates recentering if rotation happens. Detach the steering column shaft from the steering column by removing first the bolt which you will discard before tightening a new bolt to 30 Nm (22 lb-ft) torque specification. First disconnect the upper intermediate shaft from the lower intermediate shaft by removing the bolt which should be discarded before installing a new bolt and tightening it to 48 Nm (35 lb-ft). Push the two bolts and dash seal along with the upper intermediate shaft out from their positions before tightening installation bolts to 12 Nm (9 lb-ft). The procedure for disconnecting begins with the removal of the lower steering column shaft bolt from the steering gear until installation when you should tighten the new one to 30 Nm (22 lb-ft). When reassembling the system you must replace all steering column shaft bolts according to the step-by-step reverse order of removal.