Other Name: Arm Assembly - Wiper; Windshield Wiper Arm, Left; Front Arm
Position: Driver Side
Fits the following Ford Models:
Expedition | 2008-2017 | Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
Other Name: Arm Assembly - Wiper; Back Glass Wiper Arm; Rear Arm
Fits the following Ford Models:
Expedition | 2009-2017 | Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT, King Ranch, Limited, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX
Other Name: Arm Assembly - Wiper; Windshield Wiper Arm, Left; Front Arm
Position: Driver Side
Fits the following Ford Models:
Bronco Sport | 2021-2023 | Badlands, Base, Big Bend, First Edition, Heritage Edition, Heritage Limited Edition, Outer Banks | 3 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS
Other Name: Arm Assembly - Wiper; Windshield Wiper Arm, Right; Front Arm
Position: Passenger Side
Fits the following Ford Models:
Expedition | 2021-2023 | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, Timberline, XL, XL STX, XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
Q: How to Maintain and Repair the Wiper Arm and What Steps Are Involved for a Ford F-150?
A: The first step to service the wiper arm includes removing the windshield wiper pivot arm starting with the pivot arm nut cover which must be taken off followed by the nut removal then detachment of the windshield wiper pivot arm. The service procedure ends with adjusting the wiper pivot arms while performing the opposite steps from removal.
A: The service procedure for wiper arm begins by taking out the pivot arm that must be installed as one complete new piece. You should first lift the pivot arm before you remove the retainer tab to release the pivot arm. Follow the opposite sequence used for removal while conducting installation steps and adjust wiper pivot arms as required.
A: The wiper arm service requires the first step to be the withdrawal of the windshield wiper pivot arm through pulling up on pivot arms followed by tab removal. The installation process should be performed in the opposite direction to the removal steps.