How to Service the Rear Crossmember on Lincoln Mark LT?

The vehicle needs to be positioned on a hoist with neutral transmission while performing rear cross-member servicing. After removing the two exhaust hanger bolts you should tighten them to 40 Nm (30 lb-ft) torque specification during reinstallation. The service on the heat shield requires you to remove two bolts that must be tightened to 20 Nm when reinstalling. Apply a suitable transmission jack for support before taking out the two transmission support nuts while tightening them to 103 Nm (76 lb-ft) during the install process. The next step requires removal of the four transmission support crossmember bolts before tightening them to 115 Nm (85 lb-ft) torque upon reinstallation. To complete the task follow the reverse order of disassembly by reinstalling the transmission support crossmember.

How to Service and Repair the Rear Crossmember for the 4R70E/4R75E Transmission Support on Lincoln Town Car?

You can start rear cross-member service and repair on 4R70E/4R75E transmission support by positioning the vehicle on a hoist with neutral transmission settings. Start by detaching both connectors from the right-hand heated oxygen sensor system (HO2S) and the RH catalyst monitor before removing bolts securing the RH exhaust flange and the right-hand catalytic converter. You should disconnect the left-hand (LH) HO2S connector along with the LH catalyst monitor connector before removing bolts from both the LH exhaust flange and LH catalytic converter. Mount a transmission jack while you take away the insulator nuts from the transmission. The parking brake cable bracket and RH and LH side transmission support crossmember bolts need to be removed before the bracket can be discarded. Handle this operation carefully because the transmission support crossmember needs to be removed from its pocket without inflicting damage. Remove the complete transmission support crossmember by lowering both its sides. The LH side of the transmission support crossmember should be placed into its pocket before loosely installing bolts and finishing with the RH side. Secure the transmission support crossmember bolts on both LH and RH sides at 70 Nm (52 lb-ft) torque. Finally lower the transmission onto the support crossmember then put lag the transmission insulator nuts with a torque setting of 30 Nm (22 lb-ft) while the parking brake cable bracket requires a torque setting of 55 Nm (41 lb-ft). Position the new gasket for the RH catalytic converter assembly and install its bolts without complete torque. Begin the RH exhaust flange installation by tightening its nuts to 48 Nm (35 lb-ft) and then secure the RH catalytic converter-to-exhaust pipe bolts at 40 Nm (30 lb-ft). Fasten the RH HO2S and catalyst monitor connectors. The same procedure is used for the LH catalytic converter assembly where loose bolts are installed until new gaskets are fitted and then the exhaust flange nuts are tightened to 48 Nm (35 lb-ft) and the LH catalytic converter-to-exhaust pipe bolts are tightened to 40 Nm (30 lb-ft). Settle the LH HO2S and catalyst monitor connectors as the final step.

OEM Lincoln Rear Crossmember

Rear Suspension Crossmember

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

52 Rear Crossmembers found

View related parts
Lincoln Suspension Crossmember, Rear
Part Number: F2GZ-5035-D
$296.89 MSRP: $462.45
You Save: $165.56 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cross Member Assembly; Suspension Subframe Crossmember, Rear; Crossmember
- Position: Rear
- Replaces: F2GZ-5035-A
Fits the following Lincoln Models:
- MKX | 2016-2018 | Black Label, Premiere, Reserve, Select | 6 Cyl 2.7 L GAS, 6 Cyl 3.7 L GAS
View related parts
Lincoln Rear Crossmember, Front
Part Number: JL1Z-7810952-A
$736.88 MSRP: $1091.67
You Save: $354.79 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Member Assembly - Cross Center; Member Assembly - Cross - Center
- Position: Front
Fits the following Lincoln Models:
- Navigator | 2018-2024 | Base, Black Label, L Base, Premiere, Reserve, Select | 6 Cyl 3.5 L GAS
View related parts
Lincoln Suspension Crossmember
Part Number: KA1Z-5035-B
$655.64 MSRP: $971.32
You Save: $315.68 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cross Member Assembly; Crossmember
Fits the following Lincoln Models:
- Nautilus | 2019-2023 | Base, Black Label, Reserve, Select | 4 Cyl 2.0 L GAS, 6 Cyl 2.7 L GAS
View related parts
Lincoln Crossmember, Rear
Part Number: LX6Z-7811644-B
$292.95 MSRP: $430.18
You Save: $137.23 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Crossmember - Engine Support; Floor Pan Crossmember, Rear
- Position: Rear
Fits the following Lincoln Models:
- Corsair | 2021-2023 | Grand Touring | 4 Cyl 2.5 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Lincoln Suspension Crossmember
Part Number: KA1Z-5035-A
$586.02 MSRP: $868.18
You Save: $282.16 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cross Member Assembly; Crossmember
Fits the following Lincoln Models:
- Nautilus | 2019-2023 | Base, Black Label, Reserve, Select | 4 Cyl 2.0 L GAS, 6 Cyl 2.7 L GAS
View related parts
Lincoln Suspension Crossmember, Rear
Part Number: F2GZ-5035-H
$483.36 MSRP: $709.78
You Save: $226.42 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cross Member Assembly; Suspension Subframe Crossmember, Rear; Crossmember
- Position: Rear
- Replaces: F2GZ-5035-B, F2GZ-5035-C, F2GZ-5035-G
Fits the following Lincoln Models:
- MKX | 2016 | Black Label, Premiere, Reserve, Select | 6 Cyl 2.7 L GAS, 6 Cyl 3.7 L GAS
View related parts
Lincoln Crossmember, Rear
Part Number: LX6Z-7811644-A
$261.79 MSRP: $384.42
You Save: $122.63 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Crossmember - Engine Support; Floor Pan Crossmember, Rear
- Position: Rear
Fits the following Lincoln Models:
- Corsair | 2020-2023 | Base, Reserve | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Lincoln Suspension Crossmember, Rear
Part Number: HG9Z-5035-F
$491.48 MSRP: $721.70
You Save: $230.22 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cross Member Assembly; Suspension Subframe Crossmember, Rear; Crossmember
- Position: Rear
- Replaces: DG9Z-5035-B, HG9Z-5035-B, HG9Z-5035-E, DG9Z-5035-D
Fits the following Lincoln Models:
- MKZ | 2013-2020 | Base, Black Label, Black Label Hybrid, Hybrid, Premiere, Premiere Hybrid, Reserve, Reserve Hybrid, Reserve I, Reserve I Hybrid, Reserve II, Reserve II Hybrid, Select, Select Hybrid | 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.7 L GAS
View related parts
Lincoln Suspension Crossmember
Part Number: LX6Z-5035-E
$965.91 MSRP: $1430.98
You Save: $465.07 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cross Member Assembly; Crossmember
- Replaced by: LX6Z-5035-AD
Fits the following Lincoln Models:
- Corsair | 2021-2023 | Grand Touring | 4 Cyl 2.5 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Lincoln Suspension Crossmember
Part Number: G2GZ-5035-B
$482.83 MSRP: $709.00
You Save: $226.17 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cross Member Assembly; Crossmember
- Replaces: G2GZ-5035-A
Fits the following Lincoln Models:
- MKX | 2016-2018 | Black Label, Premiere, Reserve, Select | 6 Cyl 2.7 L GAS, 6 Cyl 3.7 L GAS
View related parts
Lincoln Rear Crossmember, Front
Part Number: JL1Z-4010952-A
$1005.89 MSRP: $1490.20
You Save: $484.31 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Member Assembly - Cross Center; Member Assembly - Cross - Center
- Position: Front
Fits the following Lincoln Models:
- Navigator | 2018-2024 | L Black Label, L Livery, L Reserve, L Select | 6 Cyl 3.5 L GAS
View related parts
Lincoln Center Crossmember, Rear
Part Number: JL1Z-78101C16-A
$544.19 MSRP: $806.20
You Save: $262.01 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Member - Rear Floor Cross
- Position: Rear
Fits the following Lincoln Models:
- Navigator | 2018-2024 | Base, Black Label, L Base, L Black Label, L Livery, L Reserve, L Select, Premiere, Reserve, Select | 6 Cyl 3.5 L GAS
View related parts
Lincoln Suspension Crossmember
Part Number: G3GZ-5035-B
$414.05 MSRP: $608.00
You Save: $193.95 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cross Member Assembly; Crossmember
Fits the following Lincoln Models:
- Continental | 2017-2020 | 80th Anniversary Coach Door Edition, Base, Black Label, Coach Door Edition, Livery, Premiere, Reserve, Select | 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.7 L GAS
View related parts
Lincoln Suspension Crossmember
Part Number: EJ7Z-5035-D
$292.85 MSRP: $430.03
You Save: $137.18 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cross Member Assembly; Crossmember
- Replaces: EJ7Z-5035-A
Fits the following Lincoln Models:
- MKC | 2015-2019 | Base, Black Label, Premiere, Reserve, Select | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Lincoln Suspension Crossmember
Part Number: G3GZ-5035-F
$496.70 MSRP: $729.37
You Save: $232.67 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cross Member Assembly; Crossmember
- Replaces: G3GZ-5035-C
Fits the following Lincoln Models:
- Continental | 2017-2020 | 80th Anniversary Coach Door Edition, Base, Black Label, Coach Door Edition, Livery, Premiere, Reserve, Select | 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.7 L GAS
View related parts
Lincoln Suspension Crossmember
Part Number: MC5Z-5035-E
$776.48 MSRP: $1150.33
You Save: $373.85 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cross Member Assembly; Crossmember
- Replaces: MC5Z-5035-B
Fits the following Lincoln Models:
- Aviator | 2020-2023 | Base, Black Label, Black Label Grand Touring, Grand Touring, Livery, Reserve | 6 Cyl 3.0 L GAS, 6 Cyl 3.0 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Lincoln Suspension Crossmember
Part Number: LX6Z-5035-AF
$889.09 MSRP: $1317.17
You Save: $428.08 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cross Member Assembly; Crossmember
- Replaces: LX6Z-5035-U
Fits the following Lincoln Models:
- Corsair | 2020-2023 | Base, Grand Touring, Reserve | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Lincoln Front Crossmember, Rear
Part Number: F2GZ-5810780-A
$162.44 MSRP: $250.68
You Save: $88.24 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cross Member Assembly - Rear
- Position: Rear
Fits the following Lincoln Models:
- MKX | 2016-2018 | Black Label, Premiere, Reserve, Select | 6 Cyl 2.7 L GAS, 6 Cyl 3.7 L GAS
- Nautilus | 2019-2023 | Base, Black Label, Reserve, Select | 4 Cyl 2.0 L GAS, 6 Cyl 2.7 L GAS
View related parts
Lincoln Crossmember, Front
Part Number: L1MZ-7810692-A
$216.57 MSRP: $318.02
You Save: $101.45 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cross Member Assembly; Floor Pan Crossmember, Front
- Position: Front
Fits the following Lincoln Models:
- Aviator | 2020-2023 | Base, Black Label, Black Label Grand Touring, Grand Touring, Livery, Reserve | 6 Cyl 3.0 L GAS, 6 Cyl 3.0 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Lincoln Suspension Crossmember
Part Number: EJ7Z-5035-F
$587.37 MSRP: $870.18
You Save: $282.81 (33%)
Product Specifications
- Other Name: Cross Member Assembly; Crossmember
- Manufacturer Note: Rear Cross Member
- Replaces: EJ7Z-5035-C, EJ7Z-5035-E
Fits the following Lincoln Models:
- MKC | 2015-2019 | Base, Black Label, Premiere, Reserve, Select | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS

| Page 1 of 3 |Next >

1-20 of 52 Results

Lincoln Rear Crossmember Parts Questions & Experts Answers

Rear Crossmember
9L3Z-18107A94-A
Q: How to Service the Rear Crossmember on Lincoln Mark LT?
A: The vehicle needs to be positioned on a hoist with neutral transmission while performing rear cross-member servicing. After removing the two exhaust hanger bolts you should tighten them to 40 Nm (30 lb-ft) torque specification during reinstallation. The service on the heat shield requires you to remove two bolts that must be tightened to 20 Nm when reinstalling. Apply a suitable transmission jack for support before taking out the two transmission support nuts while tightening them to 103 Nm (76 lb-ft) during the install process. The next step requires removal of the four transmission support crossmember bolts before tightening them to 115 Nm (85 lb-ft) torque upon reinstallation. To complete the task follow the reverse order of disassembly by reinstalling the transmission support crossmember.
Rear Crossmember
9W1Z-5035-A
Q: How to Service and Repair the Rear Crossmember for the 4R70E/4R75E Transmission Support on Lincoln Town Car?
A: You can start rear cross-member service and repair on 4R70E/4R75E transmission support by positioning the vehicle on a hoist with neutral transmission settings. Start by detaching both connectors from the right-hand heated oxygen sensor system (HO2S) and the RH catalyst monitor before removing bolts securing the RH exhaust flange and the right-hand catalytic converter. You should disconnect the left-hand (LH) HO2S connector along with the LH catalyst monitor connector before removing bolts from both the LH exhaust flange and LH catalytic converter. Mount a transmission jack while you take away the insulator nuts from the transmission. The parking brake cable bracket and RH and LH side transmission support crossmember bolts need to be removed before the bracket can be discarded. Handle this operation carefully because the transmission support crossmember needs to be removed from its pocket without inflicting damage. Remove the complete transmission support crossmember by lowering both its sides. The LH side of the transmission support crossmember should be placed into its pocket before loosely installing bolts and finishing with the RH side. Secure the transmission support crossmember bolts on both LH and RH sides at 70 Nm (52 lb-ft) torque. Finally lower the transmission onto the support crossmember then put lag the transmission insulator nuts with a torque setting of 30 Nm (22 lb-ft) while the parking brake cable bracket requires a torque setting of 55 Nm (41 lb-ft). Position the new gasket for the RH catalytic converter assembly and install its bolts without complete torque. Begin the RH exhaust flange installation by tightening its nuts to 48 Nm (35 lb-ft) and then secure the RH catalytic converter-to-exhaust pipe bolts at 40 Nm (30 lb-ft). Fasten the RH HO2S and catalyst monitor connectors. The same procedure is used for the LH catalytic converter assembly where loose bolts are installed until new gaskets are fitted and then the exhaust flange nuts are tightened to 48 Nm (35 lb-ft) and the LH catalytic converter-to-exhaust pipe bolts are tightened to 40 Nm (30 lb-ft). Settle the LH HO2S and catalyst monitor connectors as the final step.