Other Name: Door Mirror Drive Motor, Front; Mirror Motor; Motor
Position: Front
Fits the following Mercury Models:
Mariner | 2008-2009 | Base, Hybrid, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
Milan | 2006-2011 | Base, Hybrid, Premier | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
Q: How to service the Mirror Actuator on Mercury Sable?
A: The power mirror motor service process starts with removing exterior rear view mirror glass from its position. The first step to service the exterior rear view mirror motor involves disconnecting the electrical connector while taking out the three screws which keep the motor in place. You should uninstall the electrical connector and exterior rear view mirror motor while installing.
Q: How to Address Issues with the Mirror Actuator on a Mercury Grand Marquis?
A: Service of the power mirror motor requires you to start by removing the exterior mirror glass. The following step involves uninstalling screws that hold the exterior mirror motor then tighten them to 2 Nm (18 lb-in) when reinstalling. First disconnect all electrical connectors before taking out the power motor. Installation of the power mirror motor requires the opposite order of removal steps.
Q: How to service the power mirror actuator on Mercury Mariner?
A: Service of the power mirror motor requires starting with exterior mirror glass removal. Start by removing the exterior mirror motor screw and then apply a flat-blade tool to separate the three exterior mirror motor tabs one by one. First disconnect the electrical connector from the exterior mirror motor and proceed by removing the motor. Installation of the new motor needs operators to follow the steps backward from removal.