How to Service and Repair the Sway Bar Link on Mercury Mariner?

Begin sway bar link service or repair by placing the vehicle at NEUTRAL position on a hoisting system. You should use the hex holding feature to protect the ball stud from rotation so you can remove the upper sway bar link nut. Tighten this nut to 63 Nm (46 ft. lbs.) after installation. The hex holding feature enables you to remove lower sway bar link nut before tightening it to 55 Nm (41 ft. lbs.) during the installation process. Check both the ball joints and boots on the sway bar link for wearing then install fresh components before taking off the sway bar link. The installation procedure requires performing the opposite operations of removal starting from step one.

What are the crucial steps to service and repair the rear Sway Bar Link on Mercury Marauder?

The servicing and repairing of the rear sway bar and link requires attention to suspension fasteners because their failure results in severe performance-related expenses. Installation must happen using new fasteners that match the original part number or its equivalent but must exclude any subpar quality or replacement designs. Maintaining proper retention requires builders to follow all specified torque values during rear suspension assembly. Builders should also keep the original fastener positioning on all rear suspension arms. Perform this work while the air suspension electrical power is off to stop unexpected air spring inflation or deflation which might cause the vehicle to move while being operated. When the air suspension service switch is off, the vehicle requires raising before placing it on stands for support. Start by taking out the two nuts and washers together with bushings after discarding the nuts. The first step involves removing both nuts, then washing the bushings and sway bar links before discarding the two nuts. The completion step entails taking off both bolts, brackets, and sway bar. The installation requires you to perform the removal procedure in reverse order.

How to Service and Repair the Front Sway Bar Link on Mercury Grand Marquis?

The first step to repairing or servicing the front sway bar link includes depowering the fire suppression system because it ensures personal safety. Separate the wheel from the tire before removing caliper bolts to detach the caliper pads and anchor plate assembly in a way that does not hang the brake hose to prevent damages. Secure front sway bar links utilizing mechanic's wire until you re-install the bolts with a torque of 160 Nm (118 lb-ft). Next, remove the brake disc. Use the hex holding function to stop the stud from rotating as you remove and discard the upper sway bar link nut before tightening the new nut to 63 Nm (46 lb-ft) when installing it. The procedure must be followed to tighten the new lower sway bar link nut to 55 Nm (41 lb-ft) before discarding the old one. It is essential to repower the vehicle and execute safety procedures during the process when the vehicle has a fire suppression system to prevent serious personal injury.

OEM Mercury Sway Bar Link

Stabilizer Sway Bar Link

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

33 Sway Bar Links found

View related parts
Mercury Stabilizer Link, Front Driver Side
Part Number: 3F1Z-5K483-A
$30.14 MSRP: $41.01
You Save: $10.87 (27%)
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link, Front Left; Suspension Stabilizer Bar Link Kit; Sway Bar Link Kit; Sway Bar Link; Link Assembly; Link End
- Position: Front Driver Side
- Replaces: MEF-175, 3F1Z-5K483-AA
Fits the following Mercury Models:
- Sable | 2000-2005 | GS, LS, LS Premium, Platinum Edition | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Stabilizer Link, Front
Part Number: 2L2Z-5K483-AA
$27.25 MSRP: $43.27
You Save: $16.02 (38%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link, Front; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link
- Manufacturer Note: Warranty Eligible
- Position: Front
Fits the following Mercury Models:
- Mountaineer | 2002-2003 | Base | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Mercury Stabilizer Link, Front Passenger Side
Part Number: 3M8Z-5K483-R
$32.63 MSRP: $51.82
You Save: $19.19 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link; Front Right Suspension Stabilizer Bar Link Kit; Sway Bar Link
- Position: Front Passenger Side
Fits the following Mercury Models:
- Milan | 2006-2009 | Base, Premier | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mercury Stabilizer Link, Front Driver Side
Part Number: 3M8Z-5K483-L
$38.24 MSRP: $60.73
You Save: $22.49 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link, Front Left; Sway Bar Link Kit
- Position: Front Driver Side
Fits the following Mercury Models:
- Milan | 2006-2009 | Base, Premier | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mercury Stabilizer Link, Driver Side
Part Number: 2F1Z-5K483-BA
$42.37 MSRP: $67.27
You Save: $24.90 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link Kit; Sway Bar Link; Link Assembly; Link End
- Position: Driver Side
- Replaces: 1F1Z-5K483-BA
Fits the following Mercury Models:
- Sable | 1996-1999 | G, GS, LS, LS Premium | 6 Cyl 3.0 L GAS
View related parts
Mercury Stabilizer Link, Passenger Side
Part Number: 2F1Z-5K484-BA
$36.46 MSRP: $56.91
You Save: $20.45 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link Kit; Sway Bar Link; Link Assembly; Link End
- Position: Passenger Side
- Replaces: 1F1Z-5K484-BA
Fits the following Mercury Models:
- Sable | 1996-1999 | G, GS, LS, LS Premium | 6 Cyl 3.0 L GAS
View related parts
Mercury Stabilizer Link
Part Number: YS7Z-5K484-AA
$6.74 MSRP: $10.95
You Save: $4.21 (39%)
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link Kit; Sway Bar Link
- Manufacturer Note: Link
- Replaces: F5RZ-5K484-B
Fits the following Mercury Models:
- Cougar | 1999-2002 | Base, S, V6 | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
- Mystique | 1995-2000 | Base, GS, GS Spree, LS, LS Young America | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Mercury Stabilizer Link, Rear
Part Number: 6W1Z-5664-AA
$3.14 MSRP: $4.46
You Save: $1.32 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link, Rear; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link; Link Kit; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Position: Rear
- Replaces: F1VY-5664-A
Fits the following Mercury Models:
- Grand Marquis | 2003-2011 | GS, GSL, Limited Edition, LS, LSE, Ultimate Edition | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
- Marauder | 2003-2004 | Base | 8 Cyl 4.6 L GAS
View related parts
Mercury Stabilizer Link, Rear
Part Number: YL1Z-5K484-AA
$19.11 MSRP: $26.01
You Save: $6.90 (27%)
ADD TO CART
Product Specifications
- Other Name: Link; Rear Suspension Stabilizer Bar Link Kit
- Position: Rear
- Replaces: F75Z-5K484-AA
Fits the following Mercury Models:
- Mountaineer | 1997-2001 | Base | 6 Cyl 4.0 L GAS, 8 Cyl 5.0 L GAS
View related parts
Mercury Stabilizer Link
Part Number: F6AZ-5K484-AA
$61.19 MSRP: $83.27
You Save: $22.08 (27%)
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link
Fits the following Mercury Models:
- Grand Marquis | 1995-1997 | GS, LS | 8 Cyl 4.6 L GAS
View related parts
Mercury Stabilizer Link, Front Passenger Side
Part Number: 3F1Z-5K484-A
$30.97 MSRP: $42.14
You Save: $11.17 (27%)
ADD TO CART
Product Specifications
- Other Name: Link; Front Right Suspension Stabilizer Bar Link Kit; Sway Bar Link; Link Assembly; Link End
- Position: Front Passenger Side
- Replaces: MEF-180, 3F1Z-5K484-AA
Fits the following Mercury Models:
- Sable | 2000-2005 | GS, LS, LS Premium, Platinum Edition | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Stabilizer Link, Front Driver Side
Part Number: 7F9Z-5K483-L
$38.36 MSRP: $60.91
You Save: $22.55 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link Kit, Front Left/Right.; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Position: Front Driver Side
- Replaces: 5F9Z-5K483-AL
Fits the following Mercury Models:
- Montego | 2005-2007 | Luxury, Premier | 6 Cyl 3.0 L GAS
- Sable | 2008-2009 | Base, Premier | 6 Cyl 3.5 L GAS
View related parts
Mercury Stabilizer Link, Rear
Part Number: YL2Z-5K484-AA
$32.17 MSRP: $51.09
You Save: $18.92 (38%)
ADD TO CART
Product Specifications
- Other Name: Link; Rear Suspension Stabilizer Bar Link Kit
- Position: Rear
- Replaces: F57Z-5K484-A
Fits the following Mercury Models:
- Mountaineer | 1997-2001 | Base | 6 Cyl 4.0 L GAS, 8 Cyl 5.0 L GAS
View related parts
Mercury Stabilizer Link, Front
Part Number: 2L2Z-5K483-BA
$2.71 MSRP: $4.20
You Save: $1.49 (36%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link, Front, Rear; Suspension Stabilizer Bar Link Kit; Sway Bar Link Kit; Sway Bar Link
- Position: Front
Fits the following Mercury Models:
- Mountaineer | 1997-2002 | Base | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS
View related parts
Mercury Stabilizer Link
Part Number: 1F5Z-5K483-A
$23.95 MSRP: $32.59
You Save: $8.64 (27%)
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link Kit; Sway Bar Link Kit; Sway Bar Link
- Replaces: XF5Z-3A131-AA
Fits the following Mercury Models:
- Villager | 1999-2002 | Base, Estate, Sport | 6 Cyl 3.3 L GAS
View related parts
Mercury Stabilizer Link
Part Number: F3LY-5K484-A
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link Kit; Sway Bar Link
- Manufacturer Note: Link
Fits the following Mercury Models:
- Cougar | 1993-1997 | XR-7 | 6 Cyl 3.8 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS
View related parts
Mercury Stabilizer Link
Part Number: F8AZ-5K484-AA
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link Kit; Sway Bar Link; Link Kit
- Manufacturer Note: BEFORE 08/27/03
Fits the following Mercury Models:
- Grand Marquis | 1998-2002 | GS, LS | 8 Cyl 4.6 L GAS
View related parts
Mercury Stabilizer Link
Part Number: 1F5Z-5K484-A
Product Specifications
- Other Name: Link - Stabilizer Bar; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link; Link
Fits the following Mercury Models:
- Villager | 1999-2002 | Base, Estate, Sport | 6 Cyl 3.3 L GAS
View related parts
Mercury Stabilizer Link
Part Number: F1SZ-5K484-A
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link Kit; Sway Bar Link
Fits the following Mercury Models:
- Cougar | 1989-1992 | LS, XR-7 | 6 Cyl 3.8 L GAS, 8 Cyl 5.0 L GAS
View related parts
Mercury Stabilizer Link
Part Number: F4AZ-5K484-A
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link Kit; Sway Bar Link
Fits the following Mercury Models:
- Grand Marquis | 1992-1994 | GS, LS | 8 Cyl 4.6 L GAS

| Page 1 of 2 |Next >

1-20 of 33 Results

Mercury Sway Bar Link Parts Questions & Experts Answers

Stabilizer Link, Front
7L8Z-5K483-B
Q: How to Service and Repair the Sway Bar Link on Mercury Mariner?
A: Begin sway bar link service or repair by placing the vehicle at NEUTRAL position on a hoisting system. You should use the hex holding feature to protect the ball stud from rotation so you can remove the upper sway bar link nut. Tighten this nut to 63 Nm (46 ft. lbs.) after installation. The hex holding feature enables you to remove lower sway bar link nut before tightening it to 55 Nm (41 ft. lbs.) during the installation process. Check both the ball joints and boots on the sway bar link for wearing then install fresh components before taking off the sway bar link. The installation procedure requires performing the opposite operations of removal starting from step one.
Stabilizer Link, Rear
6W1Z-5664-AA
Q: What are the crucial steps to service and repair the rear Sway Bar Link on Mercury Marauder?
A: The servicing and repairing of the rear sway bar and link requires attention to suspension fasteners because their failure results in severe performance-related expenses. Installation must happen using new fasteners that match the original part number or its equivalent but must exclude any subpar quality or replacement designs. Maintaining proper retention requires builders to follow all specified torque values during rear suspension assembly. Builders should also keep the original fastener positioning on all rear suspension arms. Perform this work while the air suspension electrical power is off to stop unexpected air spring inflation or deflation which might cause the vehicle to move while being operated. When the air suspension service switch is off, the vehicle requires raising before placing it on stands for support. Start by taking out the two nuts and washers together with bushings after discarding the nuts. The first step involves removing both nuts, then washing the bushings and sway bar links before discarding the two nuts. The completion step entails taking off both bolts, brackets, and sway bar. The installation requires you to perform the removal procedure in reverse order.
Stabilizer Link, Front
6W1Z-5K484-AA
Q: How to Service and Repair the Front Sway Bar Link on Mercury Grand Marquis?
A: The first step to repairing or servicing the front sway bar link includes depowering the fire suppression system because it ensures personal safety. Separate the wheel from the tire before removing caliper bolts to detach the caliper pads and anchor plate assembly in a way that does not hang the brake hose to prevent damages. Secure front sway bar links utilizing mechanic's wire until you re-install the bolts with a torque of 160 Nm (118 lb-ft). Next, remove the brake disc. Use the hex holding function to stop the stud from rotating as you remove and discard the upper sway bar link nut before tightening the new nut to 63 Nm (46 lb-ft) when installing it. The procedure must be followed to tighten the new lower sway bar link nut to 55 Nm (41 lb-ft) before discarding the old one. It is essential to repower the vehicle and execute safety procedures during the process when the vehicle has a fire suppression system to prevent serious personal injury.