How to remove and install the fuel pump/sending unit assembly from the fuel tank on 2000-2011 Ford Ranger?

Disconnect and take out the fuel tank clean all the deposits around the fuel sender/pump which is fitted on the fuel tank making sure that no dirt gets into the tank. This is best done with a lock ring wrench or any other appropriate tool that is available; turning the lock ring in the counterclockwise direction until it is free, then removing from the connecting rod. Slowly removing the fuel pump/sending unit assembly out of the tank do not twist the arm of the sending unit float. Remove the old lock ring seal and then you can clean fuel pump mounting flange, tank mounting surface as well as the seal ring groove. For installation, apply some thin layer of heavy grease to the new lock ring seal so that it may be placed properly while assembling the seal with the lock ring groove. Insert the fuel sender/pump unit into the fuel tank such that the tabs fit into the slots, and retain the seal in position until the lock ring heeds this position. Last of all, secure the fuel sender/pump unit into position and with the help of the lock ring wrench or some other tool of similar use as shown in the figure below, turn the said locking ring in a clockwise manner until it is tightly against the retainer ring tab as depicted by the arrow.

How to check Fuel Pump and fuel pressure on Ford Mustang?

If you are having a challenge with inadequate fuel supply to the injectors, the following are some of the things you need to do, Always check the battery supply to ensure the vehicle is charged, look at the fuel filter to see whether there is any blockage, and lastly look at the fuel line and quick connect fittings to see if they are leaking. Make sure the fuel pump is working by unscrewing the fuel filler cap and applying the key to the ON position while another person starts the car and you hear an immediate sound of the fuel pump whirring. If there is no sound, the first thing is to follow the Service Manual instructions concerning the fuseable link to remove the IFS switch and relay, the relay connector, the fuel pump relay, and the fuel pump. If the pump does not come in, review the fuel pump relay fuse and the relay; if the latter two are good, examine the fuel pump circuitry. For the model from 2010 and previous years, the IFS switch is located near the left kick panel, the ignition must be off, and press the button on top to reset the switch. If the pump does not run at all, then Relay or the wiring harness or to consult a technician. In vehicles from 2011 and later, if the model is involved in an accident the fuel pump shut off feature may trigger and will need to be reset by turning the ignition off then on. Gauge needed to check fuel pump pressure should be having a capability of reading above the operating pressure, pressure should be relieved from the fuel system, quick connect fitting between fuel delivery hose and fuel rail should be disconnected and finally the gauge should be teed in. Switch on the engine and leave it running for some time; if the pressure is within the set limit, then the system is working admirably. High pressure can as well be caused by a damaged fuel rail pressure sensor or control modules while low pressure mean blockage at the delivery line or bad fuel pump. Following testing, regulate the fuel pressure, undo the gauge and join the fuel delivery pipe.

OEM Ford Fuel Pump

Gas Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

490 Fuel Pumps found

View related parts
Ford Fuel Pump, Passenger Side Part Number: DA8Z-9H307-H
$331.66 MSRP: $567.27
You Save: $235.61 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender And Pump Assembly; Electric Fuel Pump, Right; Fuel Pump Module Assembly; Fuel Pump Assembly
- Position: Passenger Side
- Replaces: PFS-943, DA8Z-9H307-F
Fits the following Ford Models:
- Explorer | 2013-2015 | Base, Limited, XLT | 4 Cyl 2.0 L GAS
View related parts
Ford Fuel Pump Part Number: DL3Z-9H307-A
$206.96 MSRP: $343.64
You Save: $136.68 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender And Pump Assembly; Electric Fuel Pump; Fuel Pump Module Assembly
- Replaces: PFS-937, CL3Z-9H307-B
Fits the following Ford Models:
- F-150 | 2012-2014 | FX2, FX4, King Ranch, Lariat, Limited, Platinum, XL, XLT | 6 Cyl 3.5 L GAS
View related parts
Ford Fuel Pump Part Number: 9L1Z-9H307-D
$350.40 MSRP: $581.82
You Save: $231.42 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender And Pump Assembly; Electric Fuel Pump; Fuel Pump Module Assembly
- Manufacturer Note: Includes Fuel Filter, Not Serviced Separate
- Replaces: 9L1Z-9H307-C, PFS-531
Fits the following Ford Models:
- Expedition | 2009-2017 | Eddie Bauer, King Ranch, Limited, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX
View related parts
Ford Fuel Pump Part Number: AG1Z-9H307-C
$343.83 MSRP: $570.91
You Save: $227.08 (40%)
ADD TO CART
Product Specifications
- Other Name: Sender And Pump Assembly; Electric Fuel Pump; Fuel Pump Module Assembly; Fuel Pump Assembly
- Replaces: AG1Z-9H307-B, PFS-536
Fits the following Ford Models:
- Taurus | 2010-2012 | Limited, SE, SEL | 6 Cyl 3.5 L GAS
View related parts
Ford Fuel Pump Part Number: CL3Z-9H307-A
$213.53 MSRP: $354.55
You Save: $141.02 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender And Pump Assembly; Electric Fuel Pump; Fuel Pump Module Assembly
- Replaces: PFS-604, BL3Z-9H307-C
Fits the following Ford Models:
- F-150 | 2011-2014 | FX2, FX4, King Ranch, Lariat, Limited, Platinum, XL, XLT | 6 Cyl 3.5 L GAS
View related parts
Ford Fuel Pump Part Number: 9L3Z-9H307-E
$295.65 MSRP: $490.91
You Save: $195.26 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender And Pump Assembly; Electric Fuel Pump; Fuel Pump Module Assembly
Fits the following Ford Models:
- F-150 | 2009-2014 | FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lariat Limited, Platinum, STX, SVT Raptor, XL, XLT | 6 Cyl 3.7 L CNG, 6 Cyl 3.7 L FLEX, 6 Cyl 3.7 L LPG, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L FLEX, 8 Cyl 5.4 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Ford Fuel Pump, Passenger Side Part Number: BB5Z-9H307-C
$385.44 MSRP: $640.00
You Save: $254.56 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender And Pump Assembly; Electric Fuel Pump, Right; Fuel Pump Module Assembly; Strainers & Misc Prt; Fuel Pump Assembly; Electric Fuel Pump
- Position: Passenger Side
- Replaces: BB5Z-9H307-A, PFS-580
Fits the following Ford Models:
- Explorer | 2011-2012 | Base, Limited, XLT | 4 Cyl 2.0 L GAS, 6 Cyl 3.5 L GAS
View related parts
Ford Fuel Pump Part Number: 9L3Z-9H307-F
$292.37 MSRP: $485.45
You Save: $193.08 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender And Pump Assembly; Electric Fuel Pump; Fuel Pump Module Assembly
Fits the following Ford Models:
- F-150 | 2009-2014 | FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lariat Limited, Platinum, STX, SVT Raptor, XL, XLT | 6 Cyl 3.7 L CNG, 6 Cyl 3.7 L FLEX, 6 Cyl 3.7 L LPG, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L FLEX, 8 Cyl 5.4 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Ford Fuel Pump Part Number: AL1Z-9H307-C
$324.12 MSRP: $538.18
You Save: $214.06 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender And Pump Assembly; Electric Fuel Pump; Fuel Pump Module Assembly
- Manufacturer Note: Includes Fuel Filter, Not Serviced Separate
- Replaces: AL1Z-9H307-B, PFS-546
Fits the following Ford Models:
- Expedition | 2010-2014 | EL Eddie Bauer, EL King Ranch, EL Limited, EL XL, EL XLT | 8 Cyl 5.4 L FLEX
View related parts
Ford Fuel Gauge Sending Unit Part Number: JL3Z-9A299-B
$195.81 MSRP: $332.73
You Save: $136.92 (42%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender Assembly - Fuel Tank; Fuel Sender and Hanger Assembly; Fuel Level Sensor; Fuel Sending Unit; Fuel Sender Unit
Fits the following Ford Models:
- F-150 | 2018-2020 | King Ranch, Lariat, Platinum, XL, XLT | 6 Cyl 3.0 L DIESEL
View related parts
Ford Fuel Gauge Sending Unit Part Number: HG9Z-9A299-G
$102.56 MSRP: $172.18
You Save: $69.62 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender Assembly - Fuel Tank; Fuel Level Sensor; Fuel Sending Unit; Sending Unit
- Replaces: HG9Z-9A299-B
Fits the following Ford Models:
- Fusion | 2017-2020 | Platinum, S, SE, SEL, Sport, Titanium | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.7 L GAS
View related parts
Ford Fuel Pump Part Number: HC3Z-9275-B
$163.08 MSRP: $274.55
You Save: $111.47 (41%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender Assembly - Fuel Tank
- Replaces: PS-1009, HC3Z-9275-A
Fits the following Ford Models:
- F-350 Super Duty | 2023 | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.7 L DIESEL
View related parts
Ford Fuel Pump Part Number: ML3Z-9350-A
$497.46 MSRP: $757.17
You Save: $259.71 (35%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Pump Assembly - Fuel; Mechanical Fuel Pump
Fits the following Ford Models:
- Expedition | 2022-2023 | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, Timberline, XL, XL STX, XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
- F-150 | 2021-2023 | King Ranch, Lariat, Limited, Platinum, Police Responder, Raptor, SSV, Tremor, XL, XLT | 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
View related parts
Ford Fuel Pump Part Number: FL3Z-9H307-M
$340.55 MSRP: $565.45
You Save: $224.90 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender And Pump Assembly; Fuel Pump and Sender Assembly; Fuel Pump Module Assembly; Electric Fuel Pump
- Replaces: FL3Z-9H307-G, FL3Z-9H307-D, PFS-1055
Fits the following Ford Models:
- F-150 | 2015-2020 | King Ranch, Lariat, Limited, Platinum, Police Responder, SSV, XL, XLT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Ford Fuel Pump, Passenger Side Part Number: AG1Z-9H307-A
$204.77 MSRP: $340.00
You Save: $135.23 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender And Pump Assembly; Electric Fuel Pump, Right; Fuel Pump Module Assembly; Fuel Pump Assembly; Electric Fuel Pump
- Position: Passenger Side
Fits the following Ford Models:
- Taurus | 2010-2012 | Limited, SE, SEL | 6 Cyl 3.5 L GAS
View related parts
Ford Fuel Pump Part Number: DG1Z-9H307-N
$323.03 MSRP: $536.36
You Save: $213.33 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender And Pump Assembly; Electric Fuel Pump; Fuel Pump Assembly
- Replaces: DG1Z-9H307-E, PFS-942
Fits the following Ford Models:
- Taurus | 2013-2017 | Limited, SE, SEL | 4 Cyl 2.0 L GAS
View related parts
Ford Fuel Pump Part Number: AE5Z-9H307-F
$209.15 MSRP: $347.27
You Save: $138.12 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender And Pump Assembly; Fuel Pump and Sender Assembly; Electric Fuel Pump; Fuel Pump Module Assembly; Fuel Pump Assembly
- Manufacturer Note: Service Kit
- Replaces: AE5Z-9H307-A, PFS-538
Fits the following Ford Models:
- Fusion | 2010-2012 | Hybrid, S, SE, SEL | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS
View related parts
Ford Fuel Pump Part Number: DG9Z-9H307-Z
$203.67 MSRP: $338.18
You Save: $134.51 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender And Pump Assembly; Electric Fuel Pump; Fuel Pump Module Assembly; Fuel Pump Assembly
- Manufacturer Note: Before Ordering Please Refer To OASIS Message SSM 46126 Or BCM 3847
- Replaces: DG9Z-9H307-P, DG9Z-9H307-C, PFS-957, PFS-997
Fits the following Ford Models:
- Fusion | 2013-2020 | Platinum, S, SE, SEL, Sport, Titanium | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 2.7 L GAS
View related parts
Ford Fuel Pump Part Number: 7L2Z-9H307-D
$315.36 MSRP: $523.64
You Save: $208.28 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender And Pump Assembly; Fuel Pump and Sender Assembly; Fuel Pump Module Assembly; Electric Fuel Pump; Fuel Pump Assembly
- Manufacturer Note: Service Fix
- Replaces: 4L2Z-9H307-DA
Fits the following Ford Models:
- Explorer | 2004 | Eddie Bauer, Limited, NBX, XLS, XLS Sport, XLT, XLT Sport | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Ford Fuel Pump Part Number: 8L5Z-9H307-F
$282.62 MSRP: $452.73
You Save: $170.11 (38%)
Product Specifications
- Other Name: Kit; Fuel Pump Module Assembly; Electric Fuel Pump; Fuel Pump Assembly; Fuel Level Sensor; Fuel Sending Unit; Fuel Sender Unit; Fuel Pump Module
- Manufacturer Note: kit Includes Pump Asy, Sketch And Insulator
- Replaces: 7L5Z-9H307-C, AL5Z-9H307-C, 8L5Z-9H307-C, PFS-521, PFS-560
Fits the following Ford Models:
- Ranger | 2007-2011 | FX4, Sport, STX, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS

| Page 1 of 25 |Next >

1-20 of 490 Results

Ford Fuel Pump

If you own Ford and want to keep it in top shape, choosing OEM Fuel Pump is a smart move. They are precisely engineered and follow strict factory standards. They are made in advanced facilities that use cutting edge technology. Each part goes through thorough testing to confirm strength and safety, so you can trust it. FordPartsDeal.com gives you genuine Ford Fuel Pump at some of the affordable online prices without cutting quality. Every OEM Ford part includes the manufacturer's warranty, easy returns, and super-fast delivery. So why wait? Shop now and get your vehicle back to peak condition.

Ford Fuel Pump has constant pressure to push the gasoline and hence the engine can never starve or burst. Born in 1903, Ford soon redefined the way things were made by implementing the moving assembly line in 1913, reducing the construction time, eliminating sticker prices, and making motoring affordable to people who applied to ride horses. Ford blends the same agitator innovation today in EcoBoost engines that are providing turbo thrust, fuel thriftiness, and are showing you can have speed and still be economical. Ford makes life in the cab more entertaining with SYNC by allowing teenagers to bark out song requests or map detours, yet their hands remain on the wheel and their eyes remain forward. Co-Pilot360 smarts which slam the brakes when the traffic halts abruptly, push the truck back between the paint stripes, and instill confidence in novice drivers without any fear of the rush hour are also thrown by Ford. Types of Fuel Pumps are divided into mechanical and cam driven type of Fuel Pumps in carbureted models and in-tank Fuel Pumps in modern injection. Electric designs are placed in the gasoline where the liquid cools the motor, silences noises and allows the Fuel Pump to force the higher pressures directly into the rail rather than pushing the fuel forward, cutting the vapor lock on hot days at highway speed. Fuel Pump size is based on gallons/liters per hour and the builders match the flow to horsepower such that the big cams never exceed the supply. A failing Fuel Pump presents itself as sputtering during use, and hence changing it with a healthy one will result in sparkless startups and clean up to the redline.

Ford Fuel Pump Parts and Q&A

Fuel Pump
8L5Z-9H307-D
Q: How to remove and install the fuel pump/sending unit assembly from the fuel tank on 2000-2011 Ford Ranger?
A:
Disconnect and take out the fuel tank clean all the deposits around the fuel sender/pump which is fitted on the fuel tank making sure that no dirt gets into the tank. This is best done with a lock ring wrench or any other appropriate tool that is available; turning the lock ring in the counterclockwise direction until it is free, then removing from the connecting rod. Slowly removing the fuel pump/sending unit assembly out of the tank do not twist the arm of the sending unit float. Remove the old lock ring seal and then you can clean fuel pump mounting flange, tank mounting surface as well as the seal ring groove. For installation, apply some thin layer of heavy grease to the new lock ring seal so that it may be placed properly while assembling the seal with the lock ring groove. Insert the fuel sender/pump unit into the fuel tank such that the tabs fit into the slots, and retain the seal in position until the lock ring heeds this position. Last of all, secure the fuel sender/pump unit into position and with the help of the lock ring wrench or some other tool of similar use as shown in the figure below, turn the said locking ring in a clockwise manner until it is tightly against the retainer ring tab as depicted by the arrow.
Fuel Pump
CR3Z-9H307-B
Q: How to check Fuel Pump and fuel pressure on Ford Mustang?
A:
If you are having a challenge with inadequate fuel supply to the injectors, the following are some of the things you need to do, Always check the battery supply to ensure the vehicle is charged, look at the fuel filter to see whether there is any blockage, and lastly look at the fuel line and quick connect fittings to see if they are leaking. Make sure the fuel pump is working by unscrewing the fuel filler cap and applying the key to the ON position while another person starts the car and you hear an immediate sound of the fuel pump whirring. If there is no sound, the first thing is to follow the Service Manual instructions concerning the fuseable link to remove the IFS switch and relay, the relay connector, the fuel pump relay, and the fuel pump. If the pump does not come in, review the fuel pump relay fuse and the relay; if the latter two are good, examine the fuel pump circuitry. For the model from 2010 and previous years, the IFS switch is located near the left kick panel, the ignition must be off, and press the button on top to reset the switch. If the pump does not run at all, then Relay or the wiring harness or to consult a technician. In vehicles from 2011 and later, if the model is involved in an accident the fuel pump shut off feature may trigger and will need to be reset by turning the ignition off then on. Gauge needed to check fuel pump pressure should be having a capability of reading above the operating pressure, pressure should be relieved from the fuel system, quick connect fitting between fuel delivery hose and fuel rail should be disconnected and finally the gauge should be teed in. Switch on the engine and leave it running for some time; if the pressure is within the set limit, then the system is working admirably. High pressure can as well be caused by a damaged fuel rail pressure sensor or control modules while low pressure mean blockage at the delivery line or bad fuel pump. Following testing, regulate the fuel pressure, undo the gauge and join the fuel delivery pipe.