Other Name: Pad - Seat Cushion; Seat Cushion Pad, Front Right; Seat Cushion; Passenger Discriminating Sensor
Position: Front Passenger Side
Fits the following Ford Models:
Bronco Sport | 2021-2023 | Badlands, Base, Big Bend, First Edition, Heritage Edition, Heritage Limited Edition, Outer Banks | 3 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS
Other Name: Pad - Seat Cushion; Seat Cushion Pad, Front Right; Seat Cushion; Passenger Discriminating Sensor
Position: Front Passenger Side
Fits the following Ford Models:
Bronco Sport | 2021-2023 | Badlands, Base, Big Bend, First Edition, Heritage Edition, Heritage Limited Edition, Outer Banks | 3 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS
Bronco | 1995-1996 | Eddie Bauer, XL, XLT, XLT Sport | 8 Cyl 5.0 L GAS, 8 Cyl 5.8 L GAS
F-150 | 1995-1996 | Eddie Bauer, Lightning, Special, XL, XLT | 6 Cyl 4.9 L BI-FUEL, 6 Cyl 4.9 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.8 L GAS
F-250 | 1995-1996 | Eddie Bauer, Special, XL, XLT | 6 Cyl 4.9 L BI-FUEL, 6 Cyl 4.9 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.8 L GAS, 8 Cyl 7.3 L DIESEL, 8 Cyl 7.5 L GAS
F-350 | 1995-1996 | Eddie Bauer, Special, XL, XLT | 6 Cyl 4.9 L GAS, 8 Cyl 5.8 L GAS, 8 Cyl 7.3 L DIESEL, 8 Cyl 7.5 L GAS
Other Name: Monitor - Airbag Diagnostic Module; Air Bag Seat Sensor Mat, Right; Occupant Detection Sensor
Manufacturer Note: Occupant Classification System - ECU
Position: Passenger Side
Replaces: 9E5Z-14B056-A, 9E5Z-14B056-B
Fits the following Ford Models:
Fusion | 2009-2010 | Hybrid, S, SE, SEL, Sport | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.5 L GAS
Q: What are the steps involved in servicing the Occupant Detection Sensor system on Ford Escape?
A: The Occupant Detection Sensor (ODS) system should be serviced as a system. In case of a replacement of a component, install a new ODS service kit. Make sure that the SRS is functioning and then take out the passenger seat. Procedures of disassembly and installation must be followed, the ODS system must be reset and the functionality of SRS checked afterwards.
Q: How to service the Occupant Detection Sensor on the power seat track on Ford Edge?
A: The seat assembly should be handled with care to service the power seat track occupant detection sensor. Note: To test the airbag, remove the RCM fuse. Being careful to note the position of the seat track, remove components, re-place ODS weight sensor bolt, and re-assemble all parts with appropriate torque requirements. Lastly, restore power to the SRS and make tests.