How to Properly Install a Sway Bar Kit on Ford Mustang?

Start sway bar link and kit service operations by placing the vehicle in NEUTRAL position on a hoist. The sway bar link bolts and clip nuts should be discarded before installation where the new bolts get tightened to 115 Nm (85 ft. lbs). The installer should first remove the sway bar bracket nuts and studs and brackets along with the sway bar before discarding the sway nuts and studs and tightening new ones to 70 Nm (52 ft. lbs). The professional should take out bushings and links from the sway bar if needed. The LH side tag on the sway bar must be placed properly to the left side of the vehicle during replacement installation. The installation of a new sway bar requires the use of the proper bar for convertible or coupe vehicles while maintaining the same tag color between the bar and the original component. The absence of a tag on an original sway bar will be compensated by examining link coatings for color identification where a black link calls for tag "A" yellow while white links require tag "B" in green and blue/gray links need tag "C" in orange. The final step for the installation will follow the steps of reinstallation.

How to Service and Repair the Front Sway Bar Kit and Link on Ford Explorer?

Service and repair of the front sway bar kit and link starts with component removal as dictated by the illustration and table. Refer to the removal instructions for front sway bar kit and link installation.

How to service the rear Sway Bar Kit on Ford Ranger?

Service of the rear sway bar kit starts by raising the vehicle and placing safety stands in position. Proceed by taking off the wheel along with the tire. The front of the service starts with unbolting the rear sway bar kit link nuts and joint before removing the rear sway bar kit link. Proceed by extracting every bolt from the sway bar kit mounting brackets and then eliminate the brackets. Last in the procedure is the removal of the rear sway bar kit. The reverse steps from removal need to be carried out for installation.

OEM Ford Sway Bar Kit

Stabilizer Sway Bar Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

301 Sway Bar Kits found

View related parts
Ford Stabilizer Bar, Front
Part Number: HC3Z-5482-E
$158.70 MSRP: $231.00
You Save: $72.30 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Stabilizer; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
Fits the following Ford Models:
- F-250 Super Duty | 2017-2024 | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L FLEX, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
- F-350 Super Duty | 2017-2024 | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
View related parts
Ford Stabilizer Bar
Part Number: BC3Z-5A772-B
$112.10 MSRP: $163.17
You Save: $51.07 (32%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Bar - Stabilizer; Suspension Stabilizer Bar, Rear; Sway Bar
- Replaces: 7C3Z-5A772-F
Fits the following Ford Models:
- F-250 Super Duty | 2008-2016 | Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, Platinum, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.4 L DIESEL, 8 Cyl 6.7 L DIESEL
- F-350 Super Duty | 2008-2016 | Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, Platinum, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.4 L DIESEL, 8 Cyl 6.7 L DIESEL
View related parts
Ford Stabilizer Bar, Front
Part Number: FR3Z-5482-B
$192.36 MSRP: $280.00
You Save: $87.64 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar Assembly - Roll; Suspension Stabilizer Bar, Front; Sway Bar
- Manufacturer Note: With Insulator
- Position: Front
Fits the following Ford Models:
- Mustang | 2015-2024 | Bullitt, Dark Horse, Dark Horse Premium, EcoBoost, EcoBoost Premium, GT, GT 50 Years Limited Edition, GT Premium, Mach 1, Shelby GT350, Shelby GT350R, Shelby GT500, V6 | 4 Cyl 2.3 L GAS, 6 Cyl 3.7 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.2 L GAS
View related parts
Ford Stabilizer Bar
Part Number: CR3Z-5A772-Q
$176.33 MSRP: $256.67
You Save: $80.34 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Stabilizer; Suspension Stabilizer Bar, Rear; Sway Bar
- Replaces: CR3Z-5A772-F, CR3Z-5A772-M
Fits the following Ford Models:
- Mustang | 2012-2014 | Base, Boss 302, GT, Shelby GT500 | 6 Cyl 3.7 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS
View related parts
Ford Stabilizer Bar
Part Number: HC3Z-5A772-A
$143.13 MSRP: $208.33
You Save: $65.20 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Stabilizer; Suspension Stabilizer Bar, Rear; Sway Bar; Stabilizer
Fits the following Ford Models:
- F-250 Super Duty | 2017-2024 | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L FLEX, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
- F-350 Super Duty | 2017-2024 | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
View related parts
Ford Stabilizer Bar, Front
Part Number: FR3Z-5482-A
$143.58 MSRP: $209.00
You Save: $65.42 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Stabilizer; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
Fits the following Ford Models:
- Mustang | 2015-2017 | EcoBoost, EcoBoost Premium, GT, GT 50 Years Limited Edition, GT Premium, V6 | 4 Cyl 2.3 L GAS, 6 Cyl 3.7 L GAS, 8 Cyl 5.0 L GAS
View related parts
Ford Stabilizer Bar, Front
Part Number: 9C3Z-5482-D
$192.36 MSRP: $280.00
You Save: $87.64 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Stabilizer; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
Fits the following Ford Models:
- F-250 Super Duty | 2011-2016 | King Ranch, Lariat, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL
- F-350 Super Duty | 2011-2016 | King Ranch, Lariat, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL
View related parts
Ford Stabilizer Bar
Part Number: CR3Z-5A772-S
$178.85 MSRP: $260.33
You Save: $81.48 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Stabilizer; Suspension Stabilizer Bar, Rear; Sway Bar
- Replaces: CR3Z-5A772-K, CR3Z-5A772-P
Fits the following Ford Models:
- Mustang | 2012-2014 | Boss 302, Shelby GT500 | 8 Cyl 5.0 L GAS, 8 Cyl 5.8 L GAS
View related parts
Ford Stabilizer Bar, Rear
Part Number: FR3Z-5A772-E
$162.59 MSRP: $236.67
You Save: $74.08 (32%)
ADD TO CART
Product Specifications
- Other Name: Bar - Rear Stabilizer; Suspension Stabilizer Bar, Rear; Sway Bar
- Position: Rear
Fits the following Ford Models:
- Mustang | 2024, 2015-2022 | Dark Horse, Dark Horse Premium, GT, GT Premium, Shelby GT350R, Shelby GT500 | 8 Cyl 5.0 L GAS, 8 Cyl 5.2 L GAS
View related parts
Ford Stabilizer Bar, Front
Part Number: 9C3Z-5482-B
$217.92 MSRP: $320.00
You Save: $102.08 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Stabilizer; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
Fits the following Ford Models:
- F-250 Super Duty | 2011-2014 | King Ranch, Lariat, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL
- F-350 Super Duty | 2011-2014 | King Ranch, Lariat, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL
View related parts
Ford Stabilizer Bar
Part Number: CR3Z-5A772-R
$172.55 MSRP: $251.17
You Save: $78.62 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Stabilizer; Suspension Stabilizer Bar, Rear; Sway Bar
- Replaces: CR3Z-5A772-G, CR3Z-5A772-N
Fits the following Ford Models:
- Mustang | 2012-2014 | Base, Boss 302, GT, Shelby GT500 | 6 Cyl 3.7 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS
View related parts
Ford Stabilizer Bar, Front
Part Number: F81Z-5A772-GA
$135.00 MSRP: $208.33
You Save: $73.33 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Stabilizer; Sway Bar
- Manufacturer Note: Stabilizer, SRW - 141", 162", 165", 176", 189" or 200" WB - Ford axle
- Position: Front
Fits the following Ford Models:
- F-250 Super Duty | 2017-2022 | King Ranch, Lariat, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 7.3 L GAS
- F-350 Super Duty | 2017-2022 | King Ranch, Lariat, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 7.3 L GAS
View related parts
Ford Stabilizer Bar, Front
Part Number: HC3Z-5482-G
$191.16 MSRP: $295.00
You Save: $103.84 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Stabilizer; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
- Replaces: HC3Z-5482-D, HC3Z-5482-F
Fits the following Ford Models:
- F-250 Super Duty | 2017-2022 | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 7.3 L GAS
- F-350 Super Duty | 2017-2022 | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 7.3 L GAS
View related parts
Ford Stabilizer Bar, Rear
Part Number: FR3Z-5A772-B
$116.25 MSRP: $169.22
You Save: $52.97 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Rear Stabilizer; Suspension Stabilizer Bar, Rear; Sway Bar
- Position: Rear
Fits the following Ford Models:
- Mustang | 2015-2024 | Bullitt, Dark Horse, Dark Horse Premium, EcoBoost, EcoBoost Premium, GT, GT 50 Years Limited Edition, GT Premium, Mach 1, V6 | 4 Cyl 2.3 L GAS, 6 Cyl 3.7 L GAS, 8 Cyl 5.0 L GAS
View related parts
Ford Stabilizer Bar
Part Number: HC3Z-5A772-F
$169.46 MSRP: $246.67
You Save: $77.21 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Stabilizer; Suspension Stabilizer Bar, Rear; Sway Bar
Fits the following Ford Models:
- F-250 Super Duty | 2017-2022 | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 7.3 L GAS
- F-350 Super Duty | 2017-2023 | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 7.3 L GAS
View related parts
Ford Stabilizer Bar, Rear
Part Number: FR3Z-5A772-A
$103.53 MSRP: $150.70
You Save: $47.17 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Rear Stabilizer; Suspension Stabilizer Bar, Rear; Sway Bar
- Position: Rear
Fits the following Ford Models:
- Mustang | 2015-2024 | Bullitt, Dark Horse, Dark Horse Premium, EcoBoost, EcoBoost Premium, GT, GT 50 Years Limited Edition, GT Premium, Mach 1, Shelby GT350, Shelby GT350R, Shelby GT500, V6 | 4 Cyl 2.3 L GAS, 6 Cyl 3.7 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.2 L GAS
View related parts
Ford Stabilizer Bar, Front
Part Number: JR3Z-5482-B
$220.19 MSRP: $323.33
You Save: $103.14 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar Assembly - Roll; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
Fits the following Ford Models:
- Mustang | 2018-2024 | Bullitt, Dark Horse, Dark Horse Premium, EcoBoost, EcoBoost Premium, GT, GT Premium, Mach 1 | 4 Cyl 2.3 L GAS, 8 Cyl 5.0 L GAS
View related parts
Ford Stabilizer Bar, Front
Part Number: HC3Z-5A772-D
$152.29 MSRP: $221.67
You Save: $69.38 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Stabilizer; Sway Bar
- Position: Front
Fits the following Ford Models:
- F-250 Super Duty | 2017-2022 | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.7 L DIESEL
- F-350 Super Duty | 2017-2022 | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.7 L DIESEL
View related parts
Ford Stabilizer Bar, Rear
Part Number: JR3Z-5A772-A
$132.25 MSRP: $192.50
You Save: $60.25 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Rear Stabilizer
- Position: Rear
Fits the following Ford Models:
- Mustang | 2024 | Dark Horse, Dark Horse Premium | 8 Cyl 5.0 L GAS
View related parts
Ford Stabilizer Bar, Front
Part Number: BR3Z-5482-B
$458.20 MSRP: $672.83
You Save: $214.63 (32%)
Product Specifications
- Other Name: Bar Assembly - Roll; Suspension Stabilizer Bar, Front; Sway Bar
- Manufacturer Note: Service Part May Differ From Production
- Position: Front
Fits the following Ford Models:
- Mustang | 2011-2014 | Base, Boss 302, GT, Shelby GT500 | 6 Cyl 3.7 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS

| Page 1 of 16 |Next >

1-20 of 301 Results

Ford Sway Bar Kit Parts Questions & Experts Answers

Stabilizer Bar, Front
6R3Z-5482-B
Q: How to Properly Install a Sway Bar Kit on Ford Mustang?
A: Start sway bar link and kit service operations by placing the vehicle in NEUTRAL position on a hoist. The sway bar link bolts and clip nuts should be discarded before installation where the new bolts get tightened to 115 Nm (85 ft. lbs). The installer should first remove the sway bar bracket nuts and studs and brackets along with the sway bar before discarding the sway nuts and studs and tightening new ones to 70 Nm (52 ft. lbs). The professional should take out bushings and links from the sway bar if needed. The LH side tag on the sway bar must be placed properly to the left side of the vehicle during replacement installation. The installation of a new sway bar requires the use of the proper bar for convertible or coupe vehicles while maintaining the same tag color between the bar and the original component. The absence of a tag on an original sway bar will be compensated by examining link coatings for color identification where a black link calls for tag "A" yellow while white links require tag "B" in green and blue/gray links need tag "C" in orange. The final step for the installation will follow the steps of reinstallation.
Stabilizer Bar, Front
4L2Z-5482-DA
Q: How to Service and Repair the Front Sway Bar Kit and Link on Ford Explorer?
A: Service and repair of the front sway bar kit and link starts with component removal as dictated by the illustration and table. Refer to the removal instructions for front sway bar kit and link installation.
Stabilizer Bar, Front
F87Z-5482-CA
Q: How to service the rear Sway Bar Kit on Ford Ranger?
A: Service of the rear sway bar kit starts by raising the vehicle and placing safety stands in position. Proceed by taking off the wheel along with the tire. The front of the service starts with unbolting the rear sway bar kit link nuts and joint before removing the rear sway bar kit link. Proceed by extracting every bolt from the sway bar kit mounting brackets and then eliminate the brackets. Last in the procedure is the removal of the rear sway bar kit. The reverse steps from removal need to be carried out for installation.